Category: Network Accessories
Network Accessories
Showing 361–420 of 529 resultsSorted by popularity
-
Read moreUbiquiti airMAX GigaBeam Long-Range 60/5
GHz RadioairMAX AC 60 GHz/5 GHz Radio with 1+ Gbps Throughput and Up to 2 km
RangeFeaturing a high-gain dish antenna, the GigaBeam LR is a 60 GHz radio designed
for low-interference and high-throughput connectivity in long-range
deployments. It includes a 5 GHz radio for failover. For the 60 GHz link, the
GigaBeam LR supports full bandwidth use of 2.16 GHz. The dedicated management
radio allows easy setup via Wi-Fi.Features:
60 GHz radio with 5 GHz radio backup
Low-interference 60 GHz spectrum
Up to 1+ Gbps with low latency
Long-range performance
2.4 GHz management radio
Full bandwidth support: 2.16 GHz -
Read moreUbiquiti airMAX GigaBeam Plus 60 GHz
RadioairMAX AC 60 GHz Radio System with True Duplex Gigabit Performance.
GBE-Plus is a 60 GHz Radio capable of supporting 1 Gbps rates with very low
latency. GBE-Plus can be used as a high throughput backhaul/edge PTP solution
in WISP deployments. Housed in a outdoor industrial design, the GBE-Plus
achieves significant gain improvements with an integrated Cassegrain
reflector design. The GBE-Plus is easily set-up, configured and managed
through the UISP dashboard and UISP™️ Mobile app via Bluetooth.Low-Interference 60 GHz Spectrum
35 dBi Antenna Gain with Integrated Reflector
1.5+ Gbps Bidirectional Throughput with Low Latency
Long Range, up to 1.5 km
link.ui.com Planning Support
Quick Setup Using the UISP™️ App via Bluetooth -
Read moreUbiquiti airMAX IsoStation AC 5 GHz
BridgeFeaturing a die-cast aluminum base and interchangeable horn antenna, the
IsoStation ac with proprietary airMAX ac chipset and dedicated management
Wi-Fi isolates beam communications between your devices. Ideal as an airMAX
ac CPE in crowded RF environments such as urban areas.Features:
New Design
Improved Surge Protection
Management WiFi Radio/UISP Mobile
AirOS 8 -
Read moreUbiquiti airMAX NanoBeam AC, 2.4 GHz, 13
dBi StationUISP-ready, 2.4 GHz WiFi radio that can serve as a
point-to-multipoint station.High-performance NanoBeam design at 2 GHz with updated proprietary airMAX
ac chipset and dedicated management Wi-Fi for easy UISP mobile app support
and fast setup. Excellent solution for a simple PtP bridge or use as a PtMP
station (CPE).Features:
New antenna
Improved design
Management WiFi Radio/UISP mobile app -
Read moreairMAX PowerBeamM 2.4 GHz, 400 mm
BridgeHigh-Performance airMAX® Bridge Incorporating a dish reflector design with
advanced technology, the PowerBeam® is the latest generation of Ubiquiti
airMAX® CPE for customer locations. -
Read moreFull-band 2.4 GHz Point-to-Point (PtP)
and Point-to-MultiPoint (PtMP) basestation. Provides up to 330+ Mbps data
throughputThe Rocket 2AC features revolutionary airPrism RF filtering technology and
proprietary airMAX ac chipset. Deploy the Rocket 2AC for PtP or PtMP links
using the 2.4 GHz radio band.UISP mobile app for Android and iOS
-
Read moreUbiquiti AirPRISM 5GHz 3×30° HD Sector
AntennaThe innovative airPrism® Antenna features significant advances in noise
isolation and beam performance for co‑location deployments in a multipoint
network.3 x 30° Beamwidth Coverage
The three Rocket5ac Prism™ radios
are installed at the top, middle, and bottom
of the airPrism antenna. Each radio
independently transmits and receives within
its corresponding 30° beamwidth.Powerful Performance
Highly resistant to noise interference, the airPrism antenna provides
superior beam performance in high-density areas for high-capacity, multipoint
networks.Breakthrough Design
Mounted on a single airPrism antenna, three Rocket5ac Prism radios maximize
throughput in an efficient tower footprint, minimizing installation and tower
costs. -
Read moreAmpliFi Instant Wi-Fi System
The AmpliFi Instant Wi-Fi System includes a router with an easy-to-use
touchscreen display, 1 Gigabit Ethernet port, a WAN port, an Ethernet cable,
and one MeshPoint with an Ethernet port to maximize coverage and eliminate
dead zones in your home.The AmpliFi Instant Wi-Fi system provides superior coverage with a range of
up to 4,000 sq. ft and quick setup for whole home coverage with seamless Wi-Fi.Say hello to a fresh design aesthetic
And goodbye to trying to discreetly hide your router. You need your router
where you use your devices the most; like your office, family room or
bedroom. The AmpliFi Instant is designed to complement your home’s interior
both functionally and aesthetically. Now you can place your router on your
desk, side table or nightstand without messing up your home’s decor.Features you want from a system you can understand
The AmpliFi Instant has the features you want, like device status and guest
access, with a simple interface that doesn’t require advanced technical
degrees. It’s glowing LED light indicates the system status while the AmpliFi
App puts you in control of your WiFi. -
Read moreAmpliFi Instant Router
The AmpliFi Instant Router features an easy-to-use touchscreen display, one
Gigabit Ethernet port, a WAN port, and an Ethernet cable. The AmpliFi Router
provides excellent coverage for standard-sized homes of approximately 2,000
sq ft. Expand as needed by adding MeshPoints to your mesh Wi-Fi system.Say hello to a fresh design aesthetic
And goodbye to trying to discreetly hide your router. You need your router
where you use your devices the most; like your office, family room or
bedroom. The AmpliFi Instant is designed to complement your home’s interior
both functionally and aesthetically. Now you can place your router on your
desk, side table or nightstand without messing up your home’s decor.Features you want from a system you can understand
The AmpliFi Instant has the features you want, like device status and guest
access, with a simple interface that doesn’t require advanced technical degrees.
It’s glowing LED light indicates the system status while the AmpliFi App puts
you in control of your WiFi. -
Read moreMount your CloudKey G2 or CloudKey G2
Plus into a 19″ rack with the Cloud Key G2 Rack Mount Accessory.The Cloud Key G2 and Cloud Key G2 Plus lock securely into the back of the
Rack Mount Accessory for a clean and secure installation. The Cloud Key front
panel display, RJ45 ethernet connector, reset button, and status LED are
exposed on the front panel for easy access.Works with CloudKey G2 and Cloud Key G2 Plus
Front-panel ethernet port for clean installation
Includes four cage nuts and M6 bolts -
Read moreAll-in-one router and security gateway
with an integrated PoE switch and network video recorder.The Dream Machine Special Edition (UDM SE) is an enterprise-grade UniFi OS
Console capable of helping home and business owners alike seamlessly scale
and manage their networks with high-speed, dual-WAN connectivity (10G SFP+
and 2.5GbE RJ45 ports), a Gigabit, PoE switch, and a network video recorder
(NVR) with 128 GB of internal storage. Powered by UniFi OS, the UDM SE gives
you full control of all your UniFi devices, including access points, Protect
cameras, Talk phones, and Access readers. It’s also a future-proof console
since it will be able to run all upcoming UniFi OS applications. Engineered
for end-to-end simplicity, the UDM SE features an integrated Bluetooth radio
that streamlines the initial setup and configuration process, which can be
completed in minutes with the UniFI Network application (web or
mobile).Features:
1.7 GHz quad-core processor
Dual WAN ports (10G SFP+ and 2.5GbE RJ45)
(8) GbE RJ45 ports, including (6) PoE and (2) PoE+ LAN ports
(1) 10G SFP+ LAN port
(1) 1.3″ LCM color touchscreen for at-a-glance network
monitoring
Customizable internet threat filtration and traffic identification for
enhanced network security
Quick, Bluetooth-powered setup via the UniFi Network web application or
mobile app
1U-sized, rack-mountable device
Connect a SmartPower Redundant Power System to create an uninterruptible
network
Integrated security gateway and UniFi Protect-ready NVR that supports
compatible 3.5″ HDDs
128 GB integrated storage for full UniFi OS Application experience -
Read morePrice/Performance Breakthrough
The EdgeRouter™ 6P offers next-generation price/performance value: up to
3.4 million packets per second processing with a line rate of up to 6
Gbps.Versatile Design
The EdgeRouter 6P can be rack-mounted with the use of the EdgeRouter Rack
Mount Kit, model ER-RMKIT (sold separately).Centralized Management
The EdgeRouter 6P is supported and managed by UNMS™ (Ubiquiti® Network
Management System), a comprehensive controller with an intuitive UI. A single
control plane manages registered EdgeMAX® devices across multiple
sites. -
Read moreUbiquiti EdgeRouter X – Advanced
Gigabit Ethernet RouterThe EdgeRouter™X delivers cost-effective routing performance in an
ultra‑compact form factor.Versatile PoE Capability
Powered by 24V passive PoE or a power adapter, the EdgeRouter™ X features a
passive PoE passthrough option* to power an airMAX® device.Gigabit Connectivity
The EdgeRouter™ X provides five independent, Gigabit RJ45 ports that are
configurable for switching.Carrier-Class Reliability
The EdgeRouter™ X delivers uptime performance equal to leading carrier or
enterprise technology solutions.EdgeOS™ – Advanced UI
The intuitive, graphical user interface is easy to learn and makes routing
features simple to configure and monitor. It includes an integrated
Command-Line Interface (CLI) for convenient access to advanced
functions. -
Read moreUbiquiti EdgeRouter X SFP – Advanced
Gigabit Router with PoE and SFPThe EdgeRouter™ X SFP combines cost-effective routing performance with the
convenience of passive PoE support in a compact form factor.Versatile PoE Capability
The EdgeRouter™ X SFP supports 24V passive PoE to power up to five airMAX®
devices.Gigabit Connectivity
The EdgeRouter™ X SFP features five independent, Gigabit RJ45 ports and one
Gigabit SFP port – all six are configurable for switching.Optical SFP for Backhaul
The Gigabit SFP port provides fiber connectivity to support backhaul
applications for carrier-class networks.EdgeOS™ – Advanced UI
The intuitive, graphical user interface is easy to learn and makes routing
features simple to configure and monitor. It includes an integrated
Command-Line Interface (CLI) for convenient access to advanced
functions.EdgeMAX® Promo Video
-
Read moreUbiquiti EdgeSwitch 24 – Managed
PoE+ (250W) Gigabit Switch with SFPThe EdgeSwitch is a fully managed, PoE+ Gigabit switch, delivering robust
performance and intelligent switching for growing networks. The EdgeSwitch
offers an extensive suite of advanced Layer-2 switching features and
protocols, and also provides Layer-3 routing capability.Powerful Enterprise Switch Models
The EdgeSwitch™ delivers the forwarding capacity to simultaneously process
traffic on all ports at line rate without any packet loss. Total non-blocking
throughput: up to 26 Gbps for 24-port models.Enterprise-Class Features
The EdgeSwitch™ supports an extensive suite of advanced Layer-2 switching
features and protocols, and also provides Layer-3 routing capability.Optical Fiber Backhaul
Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks,
each 48-port model includes two SFP+ ports for uplinks of up to 10
Gbps.Convenient PoE+ Support
The EdgeSwitch™ features auto-sensing IEEE 802.3af/at and 24V passive PoE to
power multiple devices on the network.Advanced UI
The comprehensive UI is easy to learn and allows administrators to
configure and monitor features in a graphical user interface. For advanced
users, a Command-Line Interface (CLI) is available through telnet and
SSH. -
Read moreUbiquiti EdgeSwitch 48 (500W) – Managed
PoE+ Gigabit Switch with SFPThe EdgeSwitch® delivers the forwarding capacity to simultaneously process
traffic on all ports at line rate without any packet loss. Total non-blocking
throughput: up to 26 Gbps for 24-port models and up to 70 Gbps for 48-port
models.Enterprise-Class Features
The EdgeSwitch® supports an extensive suite of advanced Layer-2
switching features and protocols, and also provides Layer-3 routing
capability.Optical Fiber Backhaul
Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks,
each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps.Convenient PoE+ Support
The EdgeSwitch® features auto-sensing IEEE 802.3af/at and 24V passive PoE
to power multiple devices on the network.Advanced UI
The comprehensive UI is easy to learn and allows administrators to
configure and monitor features in a graphical user interface. For advanced
users, a Command-Line Interface (CLI) is available through telnet and SSH. -
Read moreUbiquiti EdgeSwitch 8 – Managed PoE+
Gigabit Switch with SFPThe fanless EdgeSwitch™ 8 is a fully managed, high-performance, PoE+
Gigabit switch. It delivers powerful performance and intelligent switching
with its 10 independent switching ports. A DC input option is included for
flexibility.Gigabit Connectivity
The compact EdgeSwitch features a versatile port configuration: eight
Gigabit Ethernet ports that support PoE+ and two SFP ports for fiber
connectivity. It can be placed on a desktop or mounted on a wall.Convenient PoE+ Support
Sharing a total of 150W, eight Gigabit Ethernet ports offer auto-sensing
IEEE 802.3af/at PoE/PoE+ or 24V passive PoE to simplify your
infrastructure.Optical Fiber Backhaul
The EdgeSwitch provides fiber connectivity options for your growing
networks. Two SFP ports provide uplinks of up to 1 Gbps.Powerful Performance
The EdgeSwitch delivers robust switching performance with its total,
non-blocking throughput of up to 10 Gbps.Switching Capacity
The EdgeSwitch offers the forwarding capacity to simultaneously process
traffic on all ports at line rate without any packet loss.Advanced UI
The comprehensive UI is easy to learn and allows administrators to
configure and monitor features in a graphical user interface. For advanced
users, a Command-Line Interface (CLI) is available through telnet and
SSH. -
Read moreUbiquiti Ethernet Surge Protector
G2
Ethernet to Ethernet Grounded ESD ProtectionThe new ETH-SP GEN2 features an even higher discharge protection (10kA+)
compared to the older model. It’s engineered to protect any
Power‑over‑Ethernet (PoE) or non‑PoE device with a connection speed of up to
1 Gbps.ESD Protection for Outdoor PoE Devices
Damaging electrostatic discharge attacks and surges are diverted to the
ETH‑SP‑G2 and safely discharged into the ground, so network devices are
protected.Additional ESD Protection
All Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so
the ETH‑SP‑G2 adds another layer of protection to your outdoor, high-speed
network.Plug and Play Installation
Connect the ground and Ethernet cables in between your network
devices. -
Read moreUbiquiti GigaBeam
airMAX AC 60 GHz/5 GHz Radio with 1+ Gbps ThroughputThe GigaBeam is a 60 GHz radio designed for low-interference and
high-throughput connectivity. It includes a 5 GHz radio for failover. For the
60 GHz link, the GigaBeam supports full bandwidth use of 2.16 GHz. The
dedicated management radio allows easy setup via Wi-Fi.Features:
60 GHz radio with 5 GHz radio backup
Low-interference 60 GHz spectrum
Up to 1+ Gbps with low latency
2.4 GHz management radio
Full bandwidth support: 2.16 GHzSpecifications:
Enclosure UV-Resistant Polycarbonate
Gain
5 GHz
60 GHz
10 dBi
17.2 dBi
Networking Interface 10/100/1000 Ethernet Port
Wi-Fi for Management
Max. Power Consumption 11W
Power Method Passive PoE (Pairs 4, 5+; 7, 😎
Power Supply 24V, 0.5A Gigabit PoE Adapter (Included)
Mounting Pole-Mount (Kit Included)
Wall-Mount (Not Included)
ESD/EMP Protection ± 24kV Contact/Air
Operating Temperature -40 to 60° C (-40 to 140° F)
Operating Humidity 5 to 95% Noncondensing
CertificationsCE, FCC, IC
Max. Conducted TX Power
5/60 GHz Combined
25 dBm
Channel Bandwidth
60 GHz
5 GHz
2160 MHz
20/40/80 MHz
Opearating Frequency
Worldwide 5.180 – 5.875
57 – 66 -
Read moreUbiquiti Gigabit 24V (0.3A) PoE
AdapterUbiquiti Networks™ offers Power over Ethernet (PoE) Adapters to power a
variety of Ubiquiti products. The PoE Adapters are compatible with most
Ubiquiti PoE devices. Ubiquiti’s PoE Adapters also provide a variety of
safety features, to help protect your Ubiquiti hardware, such as:Surge protection
Clamping protection
Maximum surge discharge
Peak pulse current
AC cable with earth ground
ESD attacks are the leading cause for device failures. You can effectively
protect against ESD attacks using a grounded Ubiquiti PoE Adapter, shielded
outdoor Ethernet cable, and shielded RJ-45 connectors.Please note that no power cable is included with this PoE injector. A
clover to SA 3pin power cord is available to purchase separately:
https://shop.dbg.co.za/powcnd5.htmlYou can also consider making use of the UltraLAN PoE injector as a cost
affective alternative:UltraLAN Gigabit PoE Adapter – 24V 0.6A (15W)
UltraLAN Gigabit PoE Adapter – 24V 1.5A (30W)
UltraLAN Gigabit PoE Adapter – 48V 0.3A (15W) -
Read moreUbiquiti Gigabit 24V (0.5A) PoE
AdapterUbiquiti Networks™ offers Power over Ethernet (PoE) Adapters to power a
variety of Ubiquiti products. The PoE Adapters are compatible with most
Ubiquiti PoE devices. Ubiquiti’s PoE Adapters also provide a variety of
safety features, to help protect your Ubiquiti hardware, such as:Surge protection
Clamping protection
Maximum surge discharge
Peak pulse current
AC cable with earth ground
ESD attacks are the leading cause for device failures. You can effectively
protect against ESD attacks using a grounded Ubiquiti PoE Adapter, shielded
outdoor Ethernet cable, and shielded RJ-45 connectors.Please note that no power cable is included with this PoE injector. A
clover to SA 3pin power cord is available to purchase separately:
https://shop.dbg.co.za/powcnd5.htmlYou can also consider making use of the UltraLAN PoE injectors as a cost
affective alternative:UltraLAN Gigabit PoE Adapter – 24V 0.6A (15W)
UltraLAN Gigabit PoE Adapter – 24V 1.5A (30W)
UltraLAN Gigabit PoE Adapter – 48V 0.3A (15W) -
Read moreUbiquiti Gigabit 24V (1A) PoE
AdapterUbiquiti Networks™ offers Power over Ethernet (PoE) Adapters to power a
variety of Ubiquiti products. The PoE Adapters are compatible with most
Ubiquiti PoE devices. Ubiquiti’s PoE Adapters also provide a variety of
safety features, to help protect your Ubiquiti hardware, such as:Surge protection
Clamping protection
Maximum surge discharge
Peak pulse current
AC cable with earth ground
ESD attacks are the leading cause for device failures. You can effectively
protect against ESD attacks using a grounded Ubiquiti PoE Adapter, shielded
outdoor Ethernet cable, and shielded RJ-45 connectors.Please note that no power cable is included with this PoE injector. A
clover to SA 3pin power cord is available to purchase separately:
https://shop.dbg.co.za/powcnd5.htmlYou can also consider making use of the UltraLAN PoE injector as a cost
affective alternative:UltraLAN Gigabit PoE Adapter – 24V 0.6A (15W)
UltraLAN Gigabit PoE Adapter – 24V 1.5A (30W)
UltraLAN Gigabit PoE Adapter – 48V 0.3A (15W) -
Read moreGPON C+ Optical Transceiver
The UFiber™ OLT’s GPON SFP ports are designed for use with the UF-GP-C+ SFP
module. -
Read moreModular Design
The isolation antennas are interchangeable and feature high-performance
beam patterns for a range of demanding deployment needs. Combined with the
PrismStation 5AC or airFiber LTU radio, the system gets maximum gain out of
the smallest footprint.*Please note that this product is only an antenna, and does not include any
radio/electronics. -
Read moreIn-Wall 802.11ac Wave 2 Wi-Fi Access Point
Integrated Gigabit Switch
Four ports are available for bridging – one of which offers PoE
passthrough
when the AP is powered by an 802.3at PoE+ switch.Superior Processing Power
The UniFi IW HD AP is capable of complex operations (guest control,
filtering, and other resource-intensive tasks) that may slow down a
lesser-equipped AP.Power over Ethernet (PoE) Standard
The UniFi IW HD AP can be conveniently powered by an 802.3af or 802.at
compliant switch. We recommend powering your UniFi devices with a UniFi PoE
Switch.UniFi Controller
Use the UniFi Controller to provision thousands of UniFi APs, map out
networks,
quickly manage system traffic, and provision additional UniFi APs. -
Read moreairMAX IsoBeam 620 mm Isolator
RadomeThe IsoBeam™ 620 is an isolator radome that is available as an optional
accessory for these dish antenna models:RocketDish® RD-5G30-LW
PowerBeam™ PBE-5AC-620
PowerBeam PBE-M5-620
AF-5G30-S45Seamless Integrated Design
Improved wind load performance and advanced RF energy isolation in a sleek
integrated design.Plug and Play Integration
Use the IsoBeam with any of these dish antennas: airFiber® AF‑5G30‑S45,
PowerBeam™ PBE‑5AC‑620, PowerBeam PBE‑M5‑620, and RocketDish™ RD‑5G30‑LW.
Installation is quick and easy – requiring just a single screw.Breakthrough Isolation Performance
The innovative RF-choke perimeter delivers superior noise immunity in
co-location deployments. -
Read moreUbiquiti LiteBeam 5AC 26dBi
Long-RangeThe LiteBeam® AC is an ultra-lightweight airMAX ac CPE device with
incredible range and disruptive pricing.Management Wi-Fi Radio
The LiteBeam® AC integrates a separate Wi-Fi radio for fast and easy setup
using your mobile device.Improved Mounting and Surge Protection
Featuring enhanced protection against ESD events, the LiteBeam® AC offers a
more robust mount with separate azimuth and elevation adjustments.Now with airOS®8 and airView®
airOS®8 provides powerful features, including airMAX ac protocol support,
real-time RF analytics, and an all-new design for enhanced usability.High-Gain, Directional, 2×2 MIMO Antenna
The LiteBeam ac provides 23 dBi of gain for long-distance connectivity and
uses a directional antenna pattern for improved noise immunity.Breakthrough Industrial Design
Featuring the freedom of three-axis alignment, the LiteBeam ac fully
assembles in seconds – no tools needed. Only a single wrench is required for
pole-mounting.Compact in Size, Light in Weight
A lightweight form factor contained within ultra-compact packaging, the
LiteBeam ac is ideal for shipping and logistics. -
Read moreUbiquiti LiteBeam AC GEN2
The LiteBeam® AC is an ultra-lightweight airMAX ac CPE device with
incredible range and disruptive pricing.Management Wi-Fi Radio
The LiteBeam® AC integrates a separate Wi-Fi radio for fast and easy setup
using your mobile device.Improved Mounting and Surge Protection
Featuring enhanced protection against ESD events, the LiteBeam® AC offers a
more robust mount with separate azimuth and elevation adjustments.Now with airOS®8 and airView®
airOS®8 provides powerful features, including airMAX ac protocol support,
real-time RF analytics, and an all-new design for enhanced usability.High-Gain, Directional, 2×2 MIMO Antenna
The LiteBeam ac provides 23 dBi of gain for long-distance connectivity and
uses a directional antenna pattern for improved noise immunity.Breakthrough Industrial Design
Featuring the freedom of three-axis alignment, the LiteBeam ac fully
assembles in seconds – no tools needed. Only a single wrench is required for
pole-mounting.Compact in Size, Light in Weight
A lightweight form factor contained within ultra-compact packaging, the
LiteBeam ac is ideal for shipping and logistics. -
Read more5 GHz PtMP LTU Client, functions in a
PtMP environment with the LTU-Rocket as the BaseStation.Incorporating Ubiquiti’s proprietary LTU technology, the LTU-Lite is a 5
GHz radio with an integrated antenna design for use as a PtMP CPE. LTU technology
breaks through the limitations of 802.11 Wi-Fi technology and supports 1024
QAM for superior performance. Channel width flexibility (10/20/30/40/50 MHz)
allows independent TX and RX channel frequency configurations anywhere within
the radio band to avoid local interference.Features
PtMP CPE
1024 QAM
10/20/30/40/50 MHz channel bandwidth
Central configuration management from AP side
Frequency split
Auto power adjustments
Router mode supportFunctions in a PtMP environment with the LTU-Rocket as the basestation
-
Read more5 GHz PtMP LTU Long-Range Client,
functions in a PtMP environment with the LTU-Rocket as the BaseStation.Incorporating innovative industrial design with advanced technology, the
LTU LR is a Point-to-MultiPoint (PtMP) 5 GHz Radio with an integrated antenna
designed for use as a PtMP CPE. LTU technology that breaks through the
limitations of 802.11 Wi-Fi technology and supports 1024QAM for high
performance and flexible bandwidth (10/20/30/40/50 MHz).Features:
PtMP CPE
1024 QAM
10/20/30/40/50 MHz channel bandwidth
Central configuration management from AP side
Frequency split
Auto power adjustments
Router mode support
Range up to 30kmFunctions in a PtMP environment with the LTU-Rocket as the basestation
-
Read more5 GHz PtMP LTU Client with advanced RF
performance, functions in a PtMP environment with the LTU-Rocket as the
BaseStation.Incorporating innovative industrial design with advanced technology, the
LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber
station. Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not
impeded by the limitations of standard 802.11 Wi-Fi technology. It features
an integrated high-gain dish for long range and high performance. Channel
width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel
frequency configurations anywhere within the radio band to avoid local
interference.Features:
PtMP CPE
1024 QAM
10/20/30/40/50 MHz channel bandwidth
Central configuration management from AP side
Frequency split
Automatic power adjustments
Router mode supportFunctions in a PtMP environment with the LTU-Rocket as the basestation
-
Read moreUbiquiti LTU Rocket
Ubiquiti introduces the LTU Rocket®, the first Point-to-Multi-Point (PtMP)
BaseStation radio in the LTU™ product family. Operating in the 5 GHz
frequency band, the LTU Rocket is a spectrally efficient, noise-resilient
PtMP AP specifically designed for wireless ISPs (WISPs).Primary features of the LTU Rocket include:
600+ Mbps PtMP performance1
Up to 64 client connections per AP2
2+ Million pps
Proprietary RF filtering1 1+ Gbps with future firmware upgrade.
2 255 client connections with future firmware upgrade
Superior Performance
LTU is a new, proprietary technology with custom silicon and radio design
that break through the limitations of 802.11 Wi-Fi technology. This enables
LTU to deliver far superior performance over previous airMAX products that
are based on 802.11 Wi-Fi.The LTU Rocket is designed for WISPs from the
ground floor up. Its core communications processing engine enables low
latency, long-range capability, DFS flexibility, higher constellations,
better power output, and improved receive sensitivity.Seamless Compatibility
The LTU Rocket is designed to be paired with a variety of Ubiquiti antennas
to suit the needs of each installation. The radio includes a mounting bracket
that allows it to be used with a 5 GHz airMAX® Sector antenna or airMAX Omni
antenna for a complete 5 GHz PtMP BaseStation. You can even pair three LTU
Rocket radios with the airPrism® 5 GHz 3×30° HD Sector Antenna for
co-location deployments. The LTU Rocket also works with any CPE device in the
LTU family, such as the LTU-Pro.Deployment Example:
Channel Width Flexibility
Channel width flexibility allows independent TX and RX channel frequency
configurations anywhere within the radio band to avoid local interference.
Channel width options include:10 MHz
20 MHz
30 MHz
40 MHz
50 MHz
Up to 100 MHz** Available with future firmware upgrade
Auto Power Adjustments
By default, the Auto Output Power* option allows the LTU Rocket to set the
output power (EIRP) to the appropriate level.Frequency Split
The LTU Rocket can use different frequencies for TX and RX to avoid
interference.Signal Control
The LTU Rocket’s target TX output power controls each station’s TX output
power. A PtMP network can manage signal levels to enhance network stability
and achieve optimal wireless performance with the highest possible
modulation.Convenient Configuration
To manage the LTU Rocket, you have two options: the LTU Configuration
Interface and Ubiquiti Network Management System (UNMS™). Either option lets
you manually configure the LTU Rocket. The LTU Rocket can also be used to
automatically configure the stations. On each station, use the Find My AP
feature to scan for APs using the same channel bandwidth, select the
appropriate LTU Rocket, and then use it to configure the station.Integrated GPS
Built-in GPS improves synchronization and allows map and Fresnel views on
the Dashboard.LTU Configuration Interface
PtMP Dashboard
The Dashboard offers map and Fresnel views* so you can visualize the
network. The map view shows your PtMP links overlaid on a geographic map,
while the Fresnel view shows the link calculated for your selected CPE,
including line of sight, first Fresnel zone, and 60% clearance zone.
* Available for models equipped with GPS.New graphs provide instant status updates and help you to detect
connectivity issues and their effects on PtMP performance:
The airtime distribution bar graph displays in real time how much airtime
each CPE is using. Click any point to view the airtime and link score for a
specific CPE.The AP RF environment bar graph shows ambient RF noise levels across the
frequency spectrum.
The combined remote RF environment bar graph also shows ambient RF noise
levels but for the combined environment of all of the remote CPEs.The local and remote RX rate histograms show the receive modulation rates
of the various CPEs.Real-Time Spectral Analysis
airView® spectral analysis runs on a dedicated and independent receiver,
which has excellent EVM (Error Vector Magnitude) performance.
The receiver can also perform other tasks, such as a search for channel
occupancy, DFS detection, and automatic channel/frequency assignment.
Calibration (signal level measurement accuracy) and resolution bandwidth
options are enhanced. Spectral zoom (user-defined scan limits) is also
available. -
Read moreUbiquiti Multi Mode (LC) SFP Module
PairThe UF-MM1G is ideal for short-distance, outdoor, bi-directional,
multi-mode fiber runs for distances of up to 550m at 1 Gbps.Outdoor Fiber Installations
For short-distance runs of 300+ meters, use UFiber 1G multi-mode modules
for maximum reuse of existing infrastructure.UF-MM-1G-S
Supported Media Multi-Mode Fiber
Connector Type (1) LC
BiDi ✓
TX Wavelength
850 nmRX Wavelength
850 nmData Rate 1.25 Gbps SFP
Cable Distance 550 m
Pack Options 1-PairPlease note: This kit is only sold as a pair (one box with 2 units inside)
-
Read moreUbiquiti NanoBeam AC GEN2
High-Performance airMAX® Bridge
Incorporating innovative industrial design with proprietary airMAX® ac
technology, the NanoBeam® ac is ideal for CPE deployments requiring maximum
performance from the smallest possible footprint.Management Wi-Fi Radio
The NanoBeam® AC integrates a separate Wi-Fi radio for fast and easy setup
using your mobile device.Improved Surge Protection
The NanoBeam® AC features enhanced protection against ESD events.
Superior Processing
Ubiquiti’s airMAX® engine with custom IC dramatically improves TDMA latency
and network scalability. The custom silicon provides hardware acceleration
capabilities to the airMAX scheduler, to support the high data rates and dense
modulation used in airMAX AC technology.Incredible Antenna “Beam” Performance
The form factor of the NanoBeam™ AC features the highest gain for its size.
The NanoBeam AC’s excellent beam directivity provides the best performance in
high-noise environments.Now with airOS 8
airOS 8 provides powerful features, including airMAX® ac protocol support,
real-time RF analytics, and an all-new design for enhanced usability.AirMAX Technology
Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access
(TDMA) airMAX protocol allows each client to send and receive data using
pre-designated time slots scheduled by an intelligent AP controller. This
“time slot” method eliminates hidden node collisions and maximizes airtime
efficiency. It provides significant performance improvements in latency,
throughput, and scalability compared to all other outdoor systems in its
class. -
Read moreUbiquiti NanoBeam M5 16dBi
Starting with the first-generation NanoBridge®, Ubiquiti Networks™
pioneered the all-in-one design for an airMAX® product functioning as a CPE
(Customer Premises Equipment). Now Ubiquiti Networks launches the latest
generation of CPE, the NanoBeam™.Incredible Antenna “Beam” Performance
The form factor of the NanoBeam® features the highest gain for its size.
The NanoBeam’s excellent beam directivity provides the best performance in
high-noise environments.AirMAX Technology
Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access
(TDMA) airMAX protocol allows each client to send and receive data using
pre-designated time slots scheduled by an intelligent AP controller. This
“time slot” method eliminates hidden node collisions and maximizes airtime
efficiency. It provides significant performance improvements in latency,
throughput, and scalability compared to all other outdoor systems in its
class. -
Read moreUbiquiti NanoStation AC (NS‑5AC)
The indoor/outdoor NanoStation® AC is a compact, high-performance CPE
featuring airMAX® AC technology and a dedicated Wi-Fi radio for
management.Sleek Industrial Design
The NanoStation AC represent the next evolution of the iconic CPE design
that revolutionized the Wireless ISP industry.Dual Ethernet Connectivity
The NanoStation AC provides a secondary Ethernet port with software-enabled
PoE. Use this port to conveniently power an external device, such as a PoE
security camera, for seamless IP video integration.Management Wi-Fi Radio
Each NanoStation AC model integrates a separate Wi-Fi radio for fast and
easy setup using your mobile device.Improved Surge Protection
The NanoStation AC features enhanced protection against ESD events.
Now with airOS®8
airOS®8 provides powerful features, including airMAX® ac protocol support,
real-time RF analytics, and an all-new design for enhanced usability. -
Read moreUbiquiti NanoStation AC Loco
The indoor/outdoor NanoStation® AC Loco is a compact, high-performance CPE
featuring airMAX® AC technology and a dedicated Wi-Fi radio for
management.Sleek Industrial Design
The NanoStation AC Loco represent the next evolution of the iconic CPE
design that revolutionized the Wireless ISP industry.Management Wi-Fi Radio
Each NanoStation AC model integrates a separate Wi-Fi radio for fast and
easy setup using your mobile device.Improved Surge Protection
The NanoStation AC Loco feature enhanced protection against ESD
events.Now with airOS®8
airOS®8 provides powerful features, including airMAX® ac protocol support,
real-time RF analytics, and an all-new design for enhanced usability.PLEASE TAKE NOTE:
Ubiquiti does not supply this item with any included PoE/power supply. 24V
Gigabit PoE injectors can be purchased separately:
UltraLAN 24V 0.64A (15W) Gigabit
Injector: https://shop.dbg.co.za/ul-poe-24-15w-g.html
UltraLAN 24V 1.25A (30W) Gigabit
Injector: https://shop.dbg.co.za/ul-poe-24-30w-g.html -
Read moreUbiquiti NanoStation Loco M2
The NanoStation Loco M2 provides the same ease of installation as the
original, but builds on it’s predecessor and now provides 2×2 MIMO technology
and up to 150Mbps real throughput!Performance Breakthrough
150+ Mbps real outdoor throughput. Featuring 2×2 MIMO technology, the new
NanoStation series link significantly faster and farther than ever
before.New Leading-Edge Industrial Design
The original NanoStation set the bar for the world’s first low-cost and
efficiently designed outdoor broadband CPE. The new NanoStation Loco M takes
the same concept to the future with a new redesigned sleek and elegant
form-factor.Next-Gen Antenna Design
New antenna array designs with optimized cross-polarity isolation and in a
compact form-factor. -
Read moreUbiquiti NanoStation M5
The NanoStation®M is ideal for Point-to-MultiPoint (PtMP) applications
requiring high-performance CPE devices with a sleek form factor.Compact CPE Design
The NanoStation®M features the CPE design that expanded the global Wireless
ISP industry. New antenna array designs featuring a 16dBi dual-polarity
5GHz panel antenna with optimized cross-polarity isolation and in a compact
form-factor.Versatile Application Use
The NanoStation®M can be deployed for Point-to-Point (PtP) bridging,
wireless connectivity to a video surveillance system, or use as an airMAX®
CPE.Dual Ethernet Connectivity
The secondary Ethernet port can provide an external device with data
connectivity, such as a security camera, for seamless IP video integration.Powerful airOS® Features
Ubiquiti’s versatile airOS® firmware technology enables high-performance,
outdoor multi-point networking. airOS provides features such as wireless
settings, bridge or routing configuration and system management
services. -
Read moreUbiquiti NanoSwitch – Outdoor 4 Port PoE
Passthrough SwitchThe NanoSwitch is an outdoor 4-port Gigabit switch with PoE
passthrough.Power Strip Simplicity for 24V Devices
Simply providing 24V 2-pair input makes NanoSwitch
an outdoor 4-port unmanaged switch with
“always on” 24V 2-pair output on three ports.PoE Passthrough
PoE In — RJ45 port supports 10/100/1000 Ethernet connections, and supports
passive 24V, 2-pair PoE to power the switch.PoE Out — RJ45 ports support 10/100/1000 Ethernet connections, and the
three passive 24V, 2-pair PoE ports provide up to 24W PoE output.Designed for Outdoor Durability
The NanoSwitch features an outdoor weatherproof form factor.
Operating Temperature: -30 to 70° C (-22 to 158° F)
-
Read moreDual-WAN security gateway designed to
protect medium to large-sized networks with enterprise-class firewall
configuration and threat management features.The UniFi Next-Generation Gateway Pro (UXG Pro) is a powerful security
gateway that delivers a versatile networking interface and enterprise-class
threat management functionality to medium to large-sized networks. The UXG
Pro is equipped with (2) WAN ports (GbE RJ45 and 10G SFP+) that provide
failover support, as well as (2) LAN ports (GbE RJ45 and 10G SFP+) to provide
the high-speed connectivity needed to support the most bandwidth-intensive
applications. It also excels as a complete network security solution,
offering a full suite of threat mitigation features, including deep packet inspection
(DPI), intrusion detection and prevention systems (IDS/IPS), and layered
firewall configuration. The UXG Pro can be paired with a Cloud Key Plus to
create a highly powerful and secure deployment that can be fully managed with
the UniFi Network application (web/mobile).Features:
1.7 GHz quad-core processor
(2) WAN ports (GbE RJ45 and 10G SFP+) with failover support
(2) LAN ports (GbE RJ45 and 10G SFP+)
Enterprise-class DPI, IPS/IDS, and layered firewall configuration
Power redundancy when connected to the USP RPS or USP RPS Pro (sold
separately)
SmartPower outlet (125VAC/2A) for an external modem
1U-sized, rack-mountable device -
Read moreUbiquiti PowerBeam M5 22dBi (300mm)
High-Performance airMAX® Bridge
Incorporating a dish reflector design with advanced technology, the
PowerBeam™ is the latest generation of Ubiquiti Networks® airMAX® CPE for
customer locations.Integrated Radio Design
Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of
an antenna, so there is no need for cables to connect the radio to the antenna.
This improves performance because it eliminates cable losses.Incredible Antenna “Beam” Performance
The form factor of the PowerBeam features the highest gain for its size.
The PowerBeam’s excellent beam directivity provides the best performance in
high-noise environments.Powerful airOS® Features
airOS® is an intuitive, versatile, highly developed Ubiquiti
firmware technology. It is exceptionally intuitive and was designed
to require no training to operate. Behind the user interface is a
powerful firmware architecture, which enables high-performance,
outdoor multi-point networking.• Protocol Support • Ubiquiti Channelization • Spectral Width Adjustment •
ACK Auto-Timing • AAP Technology • Multi-Language SupportAirMAX Technology
Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access
(TDMA) airMAX protocol allows each client to send and receive data using
pre-designated time slots scheduled by an intelligent AP controller. This
“time slot” method eliminates hidden node collisions and maximizes airtime
efficiency. It provides significant performance improvements in latency,
throughput, and scalability compared to all other outdoor systems in its
class. -
Read moreUbiquiti PowerBeam M5 25di (400mm)
High-Performance airMAX® Bridge
Incorporating a dish reflector design with advanced technology, the
PowerBeam™ is the latest generation of Ubiquiti Networks® airMAX® CPE for
customer locations.Integrated Radio Design
Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of
an antenna, so there is no need for cables to connect the radio to the antenna.
This improves performance because it eliminates cable losses.Incredible Antenna “Beam” Performance
The form factor of the PowerBeam features the highest gain for its size.
The PowerBeam’s excellent beam directivity provides the best performance in
high-noise environments.Powerful airOS® Features
airOS® is an intuitive, versatile, highly developed Ubiquiti
firmware technology. It is exceptionally intuitive and was designed
to require no training to operate. Behind the user interface is a
powerful firmware architecture, which enables high-performance,
outdoor multi-point networking.• Protocol Support • Ubiquiti Channelization • Spectral Width Adjustment •
ACK Auto-Timing • AAP Technology • Multi-Language SupportAirMAX Technology
Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access
(TDMA) airMAX protocol allows each client to send and receive data using
pre-designated time slots scheduled by an intelligent AP controller. This
“time slot” method eliminates hidden node collisions and maximizes airtime
efficiency. It provides significant performance improvements in latency,
throughput, and scalability compared to all other outdoor systems in its
class. -
Read moreUbiquiti PowerBeamAC (GEN2 – 25dBi)
The PowerBeam® AC Gen2 incorporates a dish reflector design with
proprietary airMAX® ac technology. The PowerBeam® AC is ideal for CPE
deployments requiring maximum performance.Management Wi-Fi Radio
The PowerBeam® AC integrates a separate Wi-Fi radio for fast and easy setup
using your mobile device.Improved Mounting and Surge Protection
Featuring enhanced protection against ESD events, the LiteBeam® AC offers a
more robust mount with separate azimuth and elevation adjustments.Integrated Radio Design
Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of
an antenna, so there is no need for cables to connect the radio to the
antenna. This improves performance because it eliminates cable losses.Plug and Play Installation
The PowerBeam® AC requires no tools for assembly; only a single wrench is
required for pole-mounting.Now with airOS®8
airOS®8 provides powerful features, including airMAX® ac protocol support,
real-time RF analytics, and an all-new design for enhanced usability.Superior Processing
Ubiquiti’s airMAX® engine with custom IC dramatically improves TDMA latency
and network scalability. The custom silicon provides hardware acceleration
capabilities to the airMAX scheduler, to support the high data rates and
dense modulation used in airMAX ac technology.Incredible Antenna “Beam” Performance
The form factor of the PowerBeam® AC features the highest gain for its
size. The PowerBeam AC’s excellent beam directivity provides the best
performance in high-noise environments. -
Read moreUbiquiti PowerBeamAC (GEN2 – 25dBi)
5PackThe PowerBeam® AC Gen2 incorporates a dish reflector design with
proprietary airMAX® ac technology. The PowerBeam® AC is ideal for CPE
deployments requiring maximum performance.Management Wi-Fi Radio
The PowerBeam® AC integrates a separate Wi-Fi radio for fast and easy setup
using your mobile device.Improved Mounting and Surge Protection
Featuring enhanced protection against ESD events, the LiteBeam® AC offers a
more robust mount with separate azimuth and elevation adjustments.Integrated Radio Design
Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of
an antenna, so there is no need for cables to connect the radio to the
antenna. This improves performance because it eliminates cable losses.Plug and Play Installation
The PowerBeam® AC requires no tools for assembly; only a single wrench is
required for pole-mounting.Now with airOS®8
airOS®8 provides powerful features, including airMAX® ac protocol support,
real-time RF analytics, and an all-new design for enhanced usability.Superior Processing
Ubiquiti’s airMAX® engine with custom IC dramatically improves TDMA latency
and network scalability. The custom silicon provides hardware acceleration
capabilities to the airMAX scheduler, to support the high data rates and
dense modulation used in airMAX ac technology.Incredible Antenna “Beam” Performance
The form factor of the PowerBeam® AC features the highest gain for its
size. The PowerBeam AC’s excellent beam directivity provides the best
performance in high-noise environments. -
Read morePrism Station AC Shielded airMAX® ac
BaseStation with airPrism® TechnologyWith a die-cast aluminum base and interchangeable antenna, the
PrismStationTM AC, brings increased performance to your network using
technology that isolates beam communications between your devices. Utilizing
Ubiquiti’s advanced airMAX® ac processor, the PrismStationTM delivers
throughput speeds up to 500+ Mbps and signal ranges up to 5+ km (3+
miles).*Antenna not included
Built to Fight Noise With Prism Active RF Filter
The Ubiquiti R&D team designed airPrism filtering as a robust solution
for tower co-location interference. Requiring no communication between radios
– and functioning despite noise from other vendors’ radios (unlike GPS
synchronization) – airPrism enables greater system capacity and overall
throughput by further reducing out-of-band energy.Modular Design
The antenna horn is interchangeable and helps with beam-shaping for
specific deployment and environment needs. The PrismStationTM AC also gets
maximum gain out of the smallest footprint.Beam Performance Perfected
The PrismStationTM can use a variety of horn antenna sectors designed for
increased co-location performance without sacrificing gain. Its unique beam
performance and superb co-location characteristics allow for a higher density
of sectors than traditional sector technology.PrismStationTM AC supports GPS Sync for faster, more scalable,
carrier-class networks, with 90% higher throughout than competing
solutions.Enhanced Co-Location
Asymmetrical horn antenna options (60° and 90°) have naturally attenuated
side lobes and extremely low back radiation, and they offer industry-leading
front-to-back ratio and low side lobe radiation. Symmetrical horn antennas
(30° and 45°, the default) are ideal for cluster sector installations with
high co-location requirements.Improved Noise Immunity
PrismStationTM AC blocks or spatially filters out noise, so noise immunity
is improved. This feature is especially important in an area crowded with
other RF signals of the same or similar frequency.High MAC Efficiency
High MAC Efficiency provides ±80% PHY RATE throughput.
Management Wi-Fi Radio
The PrismStationTM AC integrates a separate Wi-Fi radio for fast and easy
setup using your mobile device.Advanced Software
Sporting an all-new design for improved usability, airOS® 8 is the
revolutionary operating system for Ubiquiti® airMAX® ac products. -
Read moreA battery-powered smart sensor capable of
detecting motion, lighting, and environmental changes.
Motion detections up to 5 m (16 ft)
Temperature and humidity sensing
Ambient light sensing
Alarm sound sensing*
Door and window state sensing
Up to 1 year of battery life
Connects to UniFi Bluetooth-enable access point**
*Based on UL217 and UL2034 alarm patterns.
**Must be connected to an up-to-date Bluetooth-supported UniFi Access
Point. -
Read morePowerful, UniFi Protect-ready LED
floodlight with a long-distance motion sensor.Smart managed floodlight with integrated motion detection and light sensor.
Housed in a compact, sleek design for low profile mounting. Easily setup and
configure the UP-FloodLight with the UniFi Protect application.Features:
Integrated motion and light sensors for floodlight control and
management
Detects motion at up to 5 meters
Provides 550 Lumens of intense LED light
PoE input
Durable IPX5 waterproof housing
Easy setup and configuration with the UniFi Protect Mobile App
Included wall mount, angle mount, and screw kit -
Read moreUbiquiti Rocket 5 AC Lite
airMAX® AC BaseStation
The Rocket™ AC features airMAX®AC technology for maximum performance in
wireless links. Ubiquiti Networks has designed the first airMAX® ac radios
with high performance and ease of installation in mind.Performance Breakthrough
airMAX® AC products offer improved latency, noise immunity, scalability and
significantly increased throughput performance.Superior Processing
Ubiquiti’s airMAX® engine with custom IC dramatically improves TDMA latency
and network scalability. The custom silicon provides hardware acceleration
capabilities to the airMAX scheduler, to support the high data rates and
dense modulation used in airMAX AC technology.Advanced airOS Firmware
airOS® 7 is the next generation of Ubiquiti’s intuitive and versatile
firmware technology. airOS 7 now features dynamic configuration changes with
enhanced device configuration (such as instant input validation), HTML5
technology, a persistent user interface, and optimization for mobile
devices.AirMAX Technology
Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access
(TDMA) airMAX protocol allows each client to send and receive data using
pre-designated time slots scheduled by an intelligent AP controller. This
“time slot” method eliminates hidden node collisions and maximizes airtime
efficiency. It provides significant performance improvements in latency,
throughput, and scalability compared to all other outdoor systems in its
class. -
Read moreUbiquiti Rocket 5 AC PRISM
(GEN2)The Rocket® Prism 5AC covers the full 5 GHz radio band and incorporates
both airMAX ac and airPrism technologies for maximum performance of wireless
links in high-density areas.Management Wi-Fi Radio
The Rocket® Prism AC integrates a separate Wi-Fi radio for fast and easy
setup using your mobile device.Improved Surge Protection
The Rocket® Prism AC features enhanced protection against ESD events.
GPS Synchronization
The Rocket® Prism AC supports GPS Sync for faster, more scalable,
carrier-class networks, with 90% higher throughout than competing
solutions.Revolutionary Filtering Technology
Ubiquiti’s patented airPrism technology provides breakthrough radio
selectivity in unlicensed wireless band performance. airPrism technology
isolates signals within the operating channel to increase capacity and
throughput in co-location deployments.Designed for High Performance
The Rocket® Prism 5AC features EMI-shielded metal housing, GPS, airPrism
circuitry, and the airView® real-time spectrum analyzer to deliver maximum
spectral efficiency/throughput.Now with airOS 8
airOS 8 provides powerful features, including airMAX® ac protocol support,
real-time RF analytics, and an all-new design for enhanced usability. -
Read moreBreakthrough Design and Performance
The powerful airMAX® RocketDish™ Antennas feature carrier-class
construction and 2×2, dual-polarity performance.Industrial-Strength Construction
airMAX® Antennas are designed with robust mechanical design for outdoor
application use.Plug and Play Integration
Every airMAX® Antenna has a built-in Rocket™ mount, so no tools are needed
to install the Rocket BaseStation. -
Read moreUbiquiti Single Mode (LC) SFP Module
PairThe UF-SM1G is ideal for long-distance, outdoor, bi-directional,
single-mode fiber runs for distances of up to 3 km at 1 Gbps.Outdoor Fiber Installations
For long-distance runs of 300+ meters, use UFiber 1G single-mode modules
for maximum reuse of existing infrastructure.UF-SM-1G-S
Supported Media Single-Mode Fiber
Connector Type (1) LC
BiDi ✓
TX Wavelength
Blue
1310 nm
Yellow
1550 nmRX Wavelength
Blue
1550 nm
Yellow
1310 nmData Rate 1.25 Gbps SFP
Cable Distance 3 km
Pack Options 1-PairPlease note: This kit is only sold as a pair (one box with 2 units inside)
-
Read more48-port, Layer 2 switch with a silent,
fanless cooling system.
Features:
(48) GbE ports
(4) 1G SFP ports
Fanless, silent cooling -
Read moreLayer 2 switch with (8) 10G SFP+
ports.The Switch Aggregation is a fully managed, Layer 2 switch with (8) 10G SFP+
ports designed to enhance your network’s switching capacity and performance
by creating high-bandwidth aggregation links. This rack-mountable switch also
offers 160 Gbps switching capacity and features a 1.3″ LCM color
touchscreen that concisely displays key system and connection insights.Additionally, with its 4.7″ depth, it’s easy to mount this compact,
fanless switch in a SOHO rack cabinet. This switch can be monitored or
configured from anywhere with the powerful, intuitive UniFi Network web
application and mobile app.Features:
(1) 1.3″ LCM color touchscreen with AR switch management
(8) 10G SFP+ ports
160 Gbps switching capacity
Fanless, near-silent cooling
-
Read moreLayer 3, PoE switch with (12) 2.5GbE,
802.3at PoE+ RJ45 ports, (12) GbE, 802.3at PoE+ RJ45 ports, and (2) 10G SFP+
ports.The Switch Enterprise 24 PoE (USW Enterprise 24 PoE) is a fully managed,
Layer 3 switch with (12) 2.5GbE, 802.3at PoE+ RJ45 ports, (12) GbE, 802.3at
PoE+ RJ45 ports, (2) 10G SFP+ ports, and a 400W total PoE supply. The USW
Enterprise 24 PoE also features a 1.3″ LCM color touchscreen that
concisely displays key system and connection insights.Additionally, the USW Enterprise 24 PoE offers enhanced power supply
failure protection when connected to the SmartPower Redundant Power System
(USP RPS sold separately). This switch can be monitored or configured from
anywhere with the powerful, intuitive UniFi Network web application and
mobile app.Features:
(1) 1.3″ LCM color touchscreen with AR switch management
(12) GbE, 802.3at PoE+ RJ45 ports
(12) 2.5GbE, 802.3at PoE+ RJ45 ports
(2) 10G SFP+ ports
(1) USP RPS DC input
400W total PoE supply
Layer 3 switching features
Single-row RJ45 port layout for easy patch panel cable management
-
Read moreLayer 3, PoE switch with (48) 2.5GbE,
802.3at PoE+ RJ45 ports and (4) 10G SFP+ ports.The Switch Enterprise 48 PoE (USW Enterprise 48 PoE) is a fully managed
switch with (48) 2.5GbE, 802.3at PoE+ RJ45 ports, (4) 10G SFP+ ports, and a
720W total PoE supply. Along with its Layer 3 functionality, this switch
offers an extensive suite of Layer 2 switching protocols, including
port-specific operation modes (switching, mirroring, or aggregate).The USW
Enterprise 48 PoE also features a 1.3″ LCM color touchscreen that
concisely displays key system and connection insights.Additionally, the USW Enterprise 48 PoE offers enhanced power supply
failure protection when connected to the SmartPower Redundant Power System
(USP RPS sold separately). This switch can be monitored or configured from
anywhere with the powerful, intuitive UniFi Network web application and
mobile app.Features:
(1) 1.3″ LCM color touchscreen with AR switch management
(48) 2.5GbE, 802.3at PoE+ RJ45 ports
(4) 10G SFP+ ports
(1) USP RPS DC input
720W total PoE supply
Layer 3 switching featuresManaged with the UniFi Network application: Version 6.2.26 and later
-
Read moreLayer 3, PoE switch with (8) 2.5GbE,
802.3at PoE+ RJ45 ports and (2) 10G SFP+ ports.The Switch Enterprise 8 PoE (USW Enterprise 8 PoE) is a fully managed,
Layer 3 switch with (8) 2.5GbE, 802.3at PoE+ RJ45 ports and (2) 10G SFP+
ports.The USW Enterprise 8 PoE also features a 1.3″ LCM color
touchscreen that concisely displays key system and connection insights. This
switch can be monitored or configured from anywhere with the powerful,
intuitive UniFi Network web application and mobile app.Features:
(1) 1.3″ LCM color touchscreen with AR switch management
(8) 2.5GbE, 802.3at PoE+ RJ45 ports
(2) 10G SFP+ ports
120W total PoE supply
Wall-mountable (kit included)
Managed with the UniFi Network application: Version 6.3.51 and later
-
Read moreThe Switch Flex Utility is an outdoor
weatherproof enclosure designed for use with the Switch Flex.It includes an Ethernet patch cable and a 60W PoE adapter, which provides a
maximum PoE budget of 46W. The USW Flex Utility can be easily mounted on a
pole, provides clean cable management and screw lock for security.Note: UniFi Switch Flex, USW-Flex, sold separately
-
Read moreLayer 2 switch with (4) 10GbE RJ45 ports
and (1) GbE, 802.3at PoE+ RJ45 input.The Switch Flex XG (USW Flex XG) is a fully managed, mult-gigabit, Layer 2
switch with (4) 10GbE RJ45 ports and (1) GbE PoE input. The USW Flex XG
sports slim, compact housing and can be mounted on a desktop*. This switch
can also be monitored or configured from anywhere with the powerful,
intuitive UniFi Network web application and mobile app.Features:
(1) GbE, 802.3at PoE+ RJ45 input
(4) 10GbE RJ45 ports
Compact, slim housing
Can be powered with a 5V, 5A USB-C adapter** -
Read moreLayer 3 switch with (48) GbE RJ45 ports
and (4) 10G SFP+ ports.The Switch Pro 48 (USW Pro 48) is a fully managed switch with (48) GbE RJ45
ports and (4) 10G SFP+ ports. The USW Pro 48 combines a rich set of Layer 2
features with advanced Layer 3 tools including inter-VLAN routing, static
routing, and a DHCP server. The USW Pro 48 is an ideal aggregation and access
layer switch for any UniFi system. It combines innovative, near-silent
cooling capability with SmartPower RPS (USP RPS) power redundancy. The switch
can also be monitored and configured from anywhere with the powerful,
intuitive UniFi Network web application and mobile app.Features:
(1) 1.3″ LCM color touchscreen with AR switch management
(48) GbE RJ45 ports
(4) 10G SFP+ ports
(1) USP RPS DC input
Near-silent cooling
Layer 3 switching featuresManaged with the UniFi Network application: Version 5.12.11 and later
