Tag: +254100720022
+254100720022
Showing 481–540 of 557 resultsSorted by popularity
-
+ 75ft Starlink Cable Extension & Repair Kit
KSh 28,000.00Add to cartEasily Expandable: Our Starlink extension
cable easily repairs and extends the original Starlink Rectangular Satellite
V2 75ft cable to 150ft cable, with wiring tools included so you don’t have to
purchase additional expensive 150ft Starlink cables.
Perfect Fix: If your Starlink cable is bitten badly or for other reasons
the old cable casing is cracked and exposed to wires, resulting in a very
slow internet connection and constant loss of signal, this Starlink cable
extension kit will be the perfect solution to your problem.
High Quality: The Starlink replacement cable adopts a fully shielded design
and pure copper data transmission, Which effectively isolates interference,
allowing you to complete non-destructive repairs and surf the Starlink
ethernet. Cables have a ground wire attached and will not lose any
functionality of your original cable (Note: Please follow the video
instructions to connect the ground wire).
Safe and Stable: Starlink cable extension connector is IP68 waterproof and
dustproof, perfectly supports 1000M protocol, and Allows you to perfectly
repair Starlink Rectangular Satellite V2 Cable in 5 minutes
Note: The box contains all the tools needed for installation and an
installation video. If you encounter any problems during purchase or use, you
can contact us and we will answer you within 24 hours
› See more product details -
+ 75ft Starlink Cable Extension Kit
KSh 28,000.00Add to cartEasily Expandable: Our Starlink extension
cable easily repairs and extends the original Starlink Rectangular Satellite
V2 75ft cable to 150ft cable, with wiring tools included so you don’t have to
purchase additional expensive 150ft Starlink cables.
Perfect Fix: If your Starlink cable is bitten badly or for other reasons
the old cable casing is cracked and exposed to wires, resulting in a very
slow internet connection and constant loss of signal, this Starlink cable
extension kit will be the perfect solution to your problem.
High Quality: The Starlink replacement cable adopts a fully shielded design
and pure copper data transmission, Which effectively isolates interference,
allowing you to complete non-destructive repairs and surf the Starlink
ethernet. Cables have a ground wire attached and will not lose any
functionality of your original cable (Note: Please follow the video
instructions to connect the ground wire).
Safe and Stable: Starlink cable extension connector is IP68 waterproof and
dustproof, perfectly supports 1000M protocol, and Allows you to perfectly
repair Starlink Rectangular Satellite V2 Cable in 5 minutes
Note: The box contains all the tools needed for installation and an
installation video. If you encounter any problems during purchase or use, you
can contact us and we will answer you within 24 hours
› See more product details -
+ 75ft Starlink Cable Extension & Repair Kit
KSh 28,000.00Add to cartEasily Expandable: Our Starlink extension
cable easily repairs and extends the original Starlink Rectangular Satellite
V2 75ft cable to 150ft cable, with wiring tools included so you don’t have to
purchase additional expensive 150ft Starlink cables.
Perfect Fix: If your Starlink cable is bitten badly or for other reasons
the old cable casing is cracked and exposed to wires, resulting in a very
slow internet connection and constant loss of signal, this Starlink cable
extension kit will be the perfect solution to your problem.
High Quality: The Starlink replacement cable adopts a fully shielded design
and pure copper data transmission, Which effectively isolates interference,
allowing you to complete non-destructive repairs and surf the Starlink
ethernet. Cables have a ground wire attached and will not lose any
functionality of your original cable (Note: Please follow the video
instructions to connect the ground wire).
Safe and Stable: Starlink cable extension connector is IP68 waterproof and
dustproof, perfectly supports 1000M protocol, and Allows you to perfectly
repair Starlink Rectangular Satellite V2 Cable in 5 minutes
Note: The box contains all the tools needed for installation and an
installation video. If you encounter any problems during purchase or use, you
can contact us and we will answer you within 24 hours -
Add to cartAbout this item
12V DC Power Go Box: This Starlink DC power conversion box will allow you
to run a Starlink system on 12-volt DC power. By using DC battery power
directly, and avoiding the DC-AC conversion, you will save 25-35% power,
extending the operating time of your system.
Portable: This Starlink 12v DC power Go Box built-in a compact enclosure
that is easy to travel with and can store a router. you can use Starlink
anywhere and in any country at any time, and provide a stable wireless
network. This Starlink 12v DC power Go Box is a must-have product for your
outdoor travel and live broadcast.
Replace Router: With our Starlink DC power conversion kit, you need to
replace your existing Starlink router with your own. So you can freely manage
and expand your network using your favorite router, Making your network
settings more flexible and personalized.
Fast Charge USB: This Starlink 12v DC power Go Box has a 5v USB port inside
and a 12v fast charge USB port outside. This 5v USB can be connected to your
favorite mini router, and the 12v port can provide fast charging mode,
providing you with various services such as fast charging of mobile phones or
power supply of standard routers.
Wide Range of Application: This Starlink DC power conversion box is
equipped with a 16-foot SAE extension cable, as well as a 12V cigarette plug
and Crocodile clips plug, Crocodile clips plug can be directly connected to a
12v power supply, please pay attention! If you use the SAE extension cable,
you need the SAE plug to correspond to the connection of the red wire and the
black wire. After the connection, you can enjoy 16 feet of long-distance
power transmission. -
Add to cartAbout this item
The patent has been registered. Multiple Adjustments: Starlink roof mount
can freely adjust the installation angle according to the actual situation.
Starlink mounting kit can adapt to various usage scenarios, such as walls and
roofs with different slopes. This design is very convenient for users, This
is important because different usage scenarios require different
angles.
Precise Adapter: The Starlink roof mount is equipped with a precise adapter
Compatible with V2 Starlink, which is made of High-quality metal material,
and able to withstand greater weight, making Starlink mount installation more
stable and convenient. Because Starlink equipment is precious and requires a
sturdy mounting bracket to ensure safety.
Firm Installation: Starlink pole mount features a generous base, which is
stable and has a strong load-bearing capacity, even in high winds. The
generous base design makes the entire Starlink mount more sturdy, providing
better safety.
Aesthetically Pleasing: The Starlink wall mount adopts a pure black
High-quality metal material, which matches the Starlink equipment itself very
well after installation. The overall design is very simple and beautiful,
giving people a high-end feel and visual appeal.
Reliable Quality: Your satisfaction is our motivation and quality
after-sales service is provided to go to meet any of your needs. If you have
any questions about your purchase and use of the process, feel free to
contact us, the professional customer service team will provide you with
satisfactory solutions within 24 hours.
› See more product details -
Add to cartAbout this item
The patent has been registered. Important Purpose: The Starlink magnetic
roof mount can be attached to the roof of the vehicle to create a temporary
fixing point, and it can also be placed on an iron house top or ferrous
surface shelf surface to create a permanent fixing point. Solve all kinds of
installation problems for you.
Install Firmly: The Starlink magnet mounting kit is made from premium
materials, ensuring stability and a strong load-bearing capacity, even in
heavy winds. This guarantees stable support for your rectangular antenna
equipment and provides optimal safety for your installation.
Protect Appearance: This Starlink magnet mounting kit has a rubber coating
that can protect the sensitive ferrous surface from scratches like painting,
polished, or other sensitive surfaces. For example, prevent the roof from
being scratched; avoid installing nails on the roof.
Strong Application: The Starlink magnetic roof mount is precisely fit for
Starlink mount, avoiding external thread shaking and wearing brackets while
increasing the stability, it solves the trouble of installation for
you.
Product Features: Starlink magnet mounting kit is made up of 1pcs super
strong neodymium magnets and a backed steel plate which was encapsulated by a
rubber, each mount can hold up to 25 pounds, and four can hold 100 pounds
vertical Hold-force, Making the rectangular disk equipment for Starlink more
stable on the ferrous surface.
Reliable Quality: Your satisfaction is our motivation and quality
after-sales service is provided to go to meet any of your needs. If you have
any questions about your purchase and use of the process, feel free to
contact us, the professional customer service team will provide you with
satisfactory solutions within 24 hours.
› See more product details -
Add to cartAbout this item
The patent has been registered. Applicable Scene: This Starlink mount clamp
is fit for the Starlink rectangular disk equipment, The clamp for the
Starlink mount is designed to secure your rectangular disk dish to any flat
or round surface from 0-2in. For example on RV ladders, on SUV roof racks, on
top of boat extensions.
Install Firmly: The clamp for the Starlink mounting kit horizontally or
vertically mounts your rectangular disk to a fixed object. The rectangular
disk equipment is fed through the bottom of the large Starlink mount clamp,
the Starlink mount clamp is rated to hold over 200 lbs, extremely sturdy also
in heavy winds.
Commercial Grade Quality: The clamp for the Starlink pole mount uses 2
machined aluminum clamps to double your protection against accidental
slipping or loosening. The claws of the Starlink mount clamp have rubber pads
creating a non-slip surface that also prevents scratches, It is a very
functional clamping mechanism.
Precautions: The Starlink mount clamp is made of extruded aluminum and
clamps directly to the bottom of your rectangular disk equipment. Mount it in
an area that allows the rectangular disk to tilt, rotate, and stow, and make
sure that when the rectangular disk is running, it will not encounter
obstacles.
Not for Marine Use: This Starlink clamp is made of stainless steel and
aluminum but is not designed to be permanently exposed to sea air for long
periods of time.
Reliable Quality: Your satisfaction is our motivation and quality
after-sales service is provided to go to meet any of your needs. If you have
any questions about your purchase and use of the process, feel free to
contact us, the professional customer service team will provide you with satisfactory
solutions within 24 hours. -
Add to cartThe patent has been registered. Important
Protection: These Starlink cable end caps are to protect your connectors,
from dirt debris, and physical damage, This is very important for those who
frequently install and remove their compatible Starlink Gen 2 rectangular
disk for equipment.
Unique Material: Starlink cable end protector covers Made out of TPU
plastic, fit the Starlink cable ends great, it offers protection without
adding too much weight to your equipment. This cover for Starlink accessories
is in high visibility color to be easily looked up and easy to use.
Anti-Lost Design: When you use the Starlink cable, The safety rope ensures
that the Starlink cable protection caps will always follow the Starlink
cable, The Starlink protector cover protects your Starlink cable instantly
when you stop using the cable, without losing sight.
Cable Out of Stock: Replacement Starlink cables are out of stock and
expensive, if they become damaged your entire system will be rendered inoperable.
These Starlink Cable plug protector Covers are a necessity for someone who
sets up and takes down their equipment.
Reliable Quality: Your satisfaction is our motivation and quality
after-sales service is provided to go to meet any of your needs. If you have
any questions about your purchase and use of the process, feel free to
contact us, The professional customer service team will provide you with
satisfactory solutions within 24 hours. -
Add to cartAbout this item
Starlink Cable Caddy: Starlink ethernet cable caddy holds the 30 ft
Starlink Ethernet cable, and it also has a built-in holder for the Ethernet
adapter. Keep your Starlink installation neat and organized with this
Starlink ethernet cable caddy.
Convenient and Tidy: Starlink ethernet cable caddy is easily on the wall,
keeping your cable and adapter off the floor and out of the way. The Starlink
cable can be wrapped and rewrapped as needed, so you can adjust the length as
necessary.
High-Quality Material: The Starlink ethernet cable caddy is made of
high-quality iron and is coated with a matte black finish, making it sturdy
and durable. Starlink ethernet cable caddy’s overall appearance is exquisite,
sturdy, and durable, and can bear up to 100 pounds after installation.
Easy to Install: Starlink ethernet cable caddy is easy to install and use,
and it’s the perfect solution for keeping your Starlink installation looking
professional and streamlined. Whether you’re a professional installer, a
business, or just a casual user, this Starlink ethernet cable caddy is an
essential accessory for your Starlink setup.
Reliable Quality: Your satisfaction is our motivation and quality
after-sales service is provided to go to meet any of your needs. If you have
any questions about your purchase and use of the process, feel free to
contact us, the professional customer service team will provide you with
satisfactory solutions within 24 hours. -
Add to cartAbout this item
Important Protection: This Starlink mounting kit is to protect your
connectors, from dirt debris, and physical damage, This is very important for
those who frequently install and remove their compatible Starlink V 2
rectangular disk for equipment.
Matching use: This Starlink mounting kit is an accessory specially used
with a Starlink mount clip, specially designed for outdoor use of Starlink
mount.
› See more product details -
Add to cartAbout this item
The patent has been registered. Important Protection: These Starlink cable
end caps are to protect your connectors, from dirt debris, and physical
damage, This is very important for those who frequently install and remove
their compatible Starlink Gen 2 rectangular disk for equipment.
Unique Material: Starlink cable end protector covers Made out of TPU
plastic, fit the Starlink cable ends great, it offers protection without
adding too much weight to your equipment. This cover for Starlink accessories
is in high visibility color to be easily looked up and easy to use.
Anti-Lost Design: When you use the Starlink cable, The safety rope ensures
that the Starlink cable protection caps will always follow the Starlink cable,
The Starlink protector cover protects your Starlink cable instantly when you
stop using the cable, without losing sight.
Cable Out of Stock: Replacement Starlink cables are out of stock and
expensive, if they become damaged your entire system will be rendered
inoperable. These Starlink Cable plug protector Covers are a necessity for
someone who sets up and takes down their equipment. -
+Starlink Magnetic Roof Mount
KSh 20,000.00Add to cartImportant Purpose: The Starlink magnetic
roof mount can be attached to the roof of the vehicle to create a temporary
fixing point, and it can also be placed on an iron house top or ferrous
surface shelf surface to create a permanent fixing point. Solve all kinds of
installation problems for you.
Install Firmly: The Starlink magnet mounting kit is made from premium
materials, ensuring stability and a strong load-bearing capacity, even in
heavy winds. This guarantees stable support for your rectangular antenna
equipment and provides optimal safety for your installation.
Protect Appearance: This Starlink magnet mounting kit has a rubber coating
that can protect the sensitive ferrous surface from scratches like painting,
polished, or other sensitive surfaces. For example, prevent the roof from
being scratched; avoid installing nails on the roof.
Strong Application: The Starlink magnetic roof mount upper part adopts a 3D
printed precise mold opening, which is precisely fit for Starlink mount,
avoiding external thread shaking and wearing brackets while increasing the
stability, it solves the trouble of installation for you.
Product Features: Starlink magnet mounting kit is made up of 1pcs super
strong neodymium magnets and a backed steel plate which was encapsulated by a
rubber, each mount can hold up to 25 pounds, and four can hold 100 pounds
vertical Hold-force, Making the rectangular disk equipment for Starlink more
stable on the ferrous surface.
› See more product details -
+Starlink Short Wall Mount
KSh 20,000.00Add to cartApplicable Scene: Starlink mount kit fit
for Starlink internet kit Satellite, for installation on an exterior wall
near the top of the gable.
Install Firmly: The Starlink roof mount is made from premium materials,
ensuring stability and a strong load-bearing capacity, even in heavy winds.
This guarantees stable support for your rectangular antenna equipment and
provides optimal safety for your Starlink internet kit satellite.
Precise Adapter: The Starlink roof mount is equipped with a precise
adapter, which is made of High-quality metal material, and able to withstand
greater weight, making Starlink mount installation more stable and
convenient. Because Starlink equipment is precious and requires a sturdy
mounting bracket to ensure safety.
Wide Application: This Starlink mounting kit comes equipped with a
versatile drill bit that can be used in a variety of different scenarios,
including wood, brick, and concrete walls. This ensures that the Starlink
mount can be securely installed on a wide range of surfaces, offering you the
flexibility to choose the perfect location for your Starlink equipment.
Aesthetically pleasing: Starlink wall mount installation places the
rectangular disk equipment on the wall, which is more visually appealing
compared to roof installation, but please pay attention to whether your
installation space is suitable.
› See more product details -
+Starlink Router Wall Mount
KSh 20,000.00Add to cartInnovative Design: The Starlink Internet
kit satellite offers a unique and carefully designed bracket for installing
the Starlink Mesh Router V2, while conveniently accommodating the placement
of both the Starlink router and Starlink ethernet adapter.
Space-Saving: The Starlink router wall mount also allows you to mount the
router bracket on the wall, freeing up valuable desk or floor space and
creating a more organized and tidy setup.
Installation Protection: This Starlink ethernet adapter wall mount provides
effective protection for your Starlink Mesh Router, including waterproof
functionality. Once installed, your Starlink router and Starlink ethernet
adapter will be positioned at a higher level, reducing the risk of accidental
damage from water splashes or spills.
Sturdy and Reliable: The Starlink mounting kit is made of high-quality
plastic, ensuring durability. Its compact size and lightweight structure make
it easy to install, providing additional stability without obstructing signal
transmission.
Sleek and Stylish: This Starlink wall mount features a modern and
fashionable design. Starlink Internet kit satellite seamlessly blends with
your room or office decor, creating a seamless integration with your interior
design. The entire setup is both aesthetically pleasing and practical. -
+Starlink Passive PoE Injector
KSh 20,000.00Add to cartStarlink PoE Injector: This Starlink DC
conversion kit will allow you to run a Starlink system on 12-volt DC power.
By using DC battery power directly, and avoiding the DC-AC-DC conversion, you
will save 25-35% power, extending the operating time of your system.
With Surge Protection: Our Starlink passive PoE injector is equipped with
surge protection, safeguarding your Starlink devices against voltage surges
and potential damage. With a maximum power output of 150W, it provides an
optimized power supply for your equipment.
Replace Router: With our Starlink PoE injector, you can replace your
existing Starlink router with your own. This way, you can freely manage and
expand your network using your favorite router, Making your network settings
more flexible and personalized.
Easy installation: It is very simple to install the Starlink PoE injector.
Watch our installation video by scanning the QR code, and the installation
can be completed in a few minutes. Make the Internet more convenient and
allow you to enjoy the convenience of Starlink satellite Internet
faster.
High-quality materials: Our Starlink DC conversion kit is made with
aluminum casing, ensuring durability and reliability. Each product undergoes
comprehensive testing through the Starlink system before shipment.
Additionally, this converter box is equipped with electrostatic discharge
protection.
› See more product details -
Add to cartIntelligence taken to the limit
Ellipse is an intelligent antenna that adapts automatically and in real time to the conditions signals are received. It has been designed to offer a stable and quality reception of DTT (UHF) signals, optimizing the rejection of the LTE band (up to channel 48) thanks to a SAW filter that offers great selectivity.
A new concept of DTT antenna that eliminates any interference even in the limits of the TV band, combining a break-through design in a 100% stainless mechanical frame that houses the new generation of Tforce electronics, featuring a revolutionary SAW filter.RED compliant.
PSU included: intelligence is activated when the antenna is powered (according to reference).
-
Add to cartIf the DAT BOSS can’t receive it, nothing can
Intelligent antenna including the BOSSTech system, designed for quality reception of UHF (DTT), optimizing LTE band rejection up to channel 48 (694MHz). -
Add to cartIf the DAT BOSS can’t receive it, nothing can
Long-range Intelligent antenna with the BOSS Tech system. Specially designed for quality reception of UHF (DTT) under extremely difficult reception conditions thanks to its design; optimizes LTE band rejection up to channel 48 (694MHz). -
Televes DINOVA BOSS antenna (LTE700, 2nd Digital Dividend) Building fronts, balconies and single-family homes
KSh 30,000.00Add to cartRadome enclosed low visual impact antenna, specifically designed for locations where aesthetics play an important role. Ideal for building fronts, historic buildings, protected areas and even single-family homes (balconies). It is a 7-element Yagi directional antenna, manufactured using Microstrip technology.
The BOSS Tech system automatically controls the level of the received signal (either very high or very low) to always provide optimal output level. The new design using TForce technology makes this intelligent device even more versatile.
RED compliant
-
Televes DINOVA BOSS MIX antenna (LTE700, 2nd Digital Dividend) Building fronts, balconies and single-family homes
KSh 30,000.00Add to cartRadome enclosed low visual impact antenna, specifically designed for locations where aesthetics play an important role. Ideal for building fronts, historic buildings, protected areas and even single-family homes (balconies). It is a 7-element Yagi directional antenna, manufactured using Microstrip technology for UHF and BIII printed dipole.
Improved BIII response: Under difficult reception conditions, BIII reception can be improved by extending the telescopic antennas.The BOSS Tech system automatically controls the level of the received signal (either very high or very low) to always provide optimal output level. The new design using TForce technology makes this intelligent device even more versatile.
RED compliant
-
Add to cartEnhance your camping stay with a Intelligent antenna
Easy-to-install and low visual impact portable antenna, ideal for camping sites. Provided with a full installation kit consisting of:Power injector for battery connection (ref. 7450)
T100plus coaxial cable reel (14m, ref. 214102)
Connectors: 3xF (ref. 4171xx) and 1xIEC (ref. 4130)
Screws with assembly wrench for mast mounting
The BOSS Tech system automatically controls the level of the received signal (either very high or very low) to always provide optimal output level. The new design using TForce technology makes this intelligent device even more versatile.RED compliant
-
Add to cartAntenna with a 360º reception capability (omnidirectional), therefore, there is no need to point again the antenna when changing location. It is perfect for DTT reception in moving facilities (ships, campers…) for short stays.
The BOSSTech system automatically controls the level of the received signal (either very high or very low) to always provide optimal output level. The new design using TForce technology makes this intelligent device even more versatile.
Provided with a full installation kit consisting of:
12V PicoKom power supply unit (Ref. 579401)
Current inyector for battery connection (Ref. 7450)
Straight bracket for antenna installation
Connectors: 3xF (ref. 4171xx) and 1xIEC (ref. 4130)
Screws with assembly wrench for mast mounting
RED compliant -
Televes BEXIA antenna (LTE700, 2nd Digital Dividend) The Best EXperience Indoor Antenna
KSh 25,000.00Add to cartOutdoor performance, indoors
BEXIA is an indoor DTT antenna with a sleek and stylish design using TForce with BOSS technology to match the performance of the best outdoor DTT antennas. There is no need to point BEXIA towards the signal, and its intelligent system offers a low power consumption.The BOSS Tech system automatically controls the level of the received signal (either very high or very low) to always provide optimal output level. The new design using TForce technology makes this intelligent device even more versatile.
The antenna can be powered using the USB port of the TV, or with an standard smartphone charger (5V). So, a power injector and a USB-microUSB cable are included.
RED compliant
-
Televes INNOVA BOSS antenna (LTE700, 2nd Digital Dividend) Indoor intelligent antenna with Plug & Play installation
KSh 25,000.00Add to cartOmnidirectional and intelligent antenna, specially designed for reception of DTT signals indoors. The intelligent mode can be activated using a conventional smartphone PSU or with the USB port of the TV, making easier the installation process (Plug & Play).
The BOSSTech system automatically controls the level of the received signal (either very high or very low) to always provide optimal output level. The new design using TForce technology makes this intelligent device even more versatile.
RED compliant
-
Televes INNOVA BOSS MIX antenna (LTE700, 2nd Digital Dividend) Indoor intelligent antenna with Plug & Play installation
KSh 25,000.00Add to cartOmnidirectional and intelligent antenna, specially designed for reception of DTT signals indoors. The intelligent mode can be activated using a conventional smartphone PSU or with the USB port of the TV, making easier the installation process (Plug & Play). The telescopic antennas improve BIII reception.
The BOSSTech system automatically controls the level of the received signal (either very high or very low) to always provide optimal output level. The new design using TForce technology makes this intelligent device even more versatile.
RED compliant
-
Televes MIRA BOSS antenna (LTE700, 2nd Digital Dividend) With optimized signal reception system
KSh 25,000.00Add to cartMIRA BOSS is an indoor DTT antenna with outstanding performance, thanks to its optimized UHF reception system. The antenna dish allows for a slight change in antenna orientation to adjust the reception and improve signal quality.
The BOSS Tech system automatically controls the level of the received signal (either very high or very low) to always provide optimal output level. The new design using TForce technology makes this intelligent device even more versatile.
The antenna is provided with PSU and IEC cable lead.
RED compliant
-
Add to cartDomestic 12 V-power supply (220 mA) that powers equipment through the input coaxial cable while allowing the transmission of the TV signal. Included in the installation to power either mast amplifiers or a BOSS system. Compatible with satellite combination amplifiers (SATmix), since the equipment detects the presence of the LNB management signal on the output (voltage and tone) generated by a receiver, allowing it to reach the input
-
Add to cartDomestic 12 V-power supply (200 mA) that powers equipment through the input coaxial cable while allowing the transmission of the TV signal. Included in the installation to power either mast amplifiers or a BOSS system. Furthermore, it is equipped with two outputs.
-
Televes “F” Power Supply Unit 12 V – 220 mA, 2 outputs
KSh 10,000.00Add to cartDomestic 12 V-power supply (220 mA) that powers equipment through the input coaxial cable while allowing the transmission of the TV signal. Included in the installation to power either mast amplifiers or a BOSS system. Furthermore, it is equipped with two outputs.
-
Add to cartDomestic amplifier with 3 outputs (2+TV) and automatic level adjustment to extend the terrestrial television domestic network.
The TV output provides a lower gain in order to be directly connected to the television set (no outlet installation).
Equipped with selectable LTE and input power supply for pre-amplifier or BOSS system feeding. -
Add to cartDomestic amplifier with 1 output and automatic gain adjustment to extend the terrestrial television home network.
Equipped with LTE700/5G filtering and input power supply for pre-amplifier or BOSS system feeding. -
Add to cartDomestic amplifier with 2 outputs and automatic gain adjustment to extend the terrestrial television home network.
Equipped with LTE700/5G filtering and input power supply for pre-amplifier or BOSS system feeding. -
Add to cartDomestic amplifier with 3 outputs (2+TV) and automatic gain adjustment to extend the terrestrial television domestic network.
The TV output provides a lower gain for direct connection to the television set (no outlet installation).
Equipped with LTE700/5G filtering and input power supply for pre-amplifier or BOSS system feeding. -
Televes Surge Arrester Accessory for BOSS antennas
KSh 10,000.00Add to cartTo be inserted in the coaxial cable, just after the antenna, in order to redirect to ground any lightning strikes that could damage the antenna.
Recommended installation inside an outdoor housing attached to the mast
-
Televes FM antenna Radio reception
KSh 10,000.00Add to cartOmnidirectional antenna equipped with a compact circular dipole.
Supplied in individual packing. -
Televes DAB (BIII) antenna
KSh 10,000.00 -
Televes L 700 antenna 18 elements
KSh 10,000.00Add to cartA monolithic Yagi antenna equipped with 18 elements, a dihedral-shaped reflector and a double-V dipole. Compact and light-weight, it provides an exceptional relation between robustness, directivity and gain.
Can be installed in both horizontal and vertical polarizations.
Supplied in 6-unit packing. -
Add to cartThe best balance between robustness and compactness
The VZenit antenna has a V-type structure: it consists in two vertically stacked Yagi in phase, which results in a compact antenna thanks to its excellent ratio between gain and length.
For UHF reception it includes a filtering feature with a high rejection for bands beyond channel 48, without losing flatness in the frequency response of the pass-band (channels 21-48). This makes it suitable for the 2nd Digital Dividend (LTE700). -
Televes 4GNOVA antenna 4G extended coverage
KSh 20,000.00Add to cartLTE/4G transmission and reception antenna for extended coverage in shielded areas or in areas where propagation conditions are difficult. The 4GNova antenna can be connected either to an LTE/4G router or to an indoor antenna. In the latter case, the 4G-enabled devices will have coverage without the need for high-power transmission, thus saving battery and protecting the user from excessive radiation.
The coaxial 50 Ohm cable is fixed to the antenna chassis. Two available lengths and two available connector types. -
Televes 4G/LTE antennas 4G extended coverage
KSh 20,000.00Add to cartTwo 4G/LTE signals transmission and reception antennas, for extended coverage in shielded areas or in areas where propagation conditions are difficult. Both antennas are installed with a >0.5m separation for multiple transmission/reception and are connected directly to a 4G MIMO router.
A 50Ohm coaxial cable is included in each antenna. These coaxial cables have a length of 7,5m and SMA male connectors.
-
Televes QSD75 aluminium offset dishes – Orange
KSh 4,500.00Add to cartQuality signal reception for life
75 cm x 85 cm offset aluminium satellite dish for satellite signal reception. satellite dish in the QSD (Quality Satellite Dish) series, of an extremely high quality, achieved after undergoing the most stringent controls to ensure the best behaviour and robustness.Grouped product items Colour: Orange, Supply method: Single packing -
Televes QSD75 aluminium offset dishes – Graphite
KSh 4,500.00Add to cartQuality signal reception for life
75 cm x 85 cm offset aluminium satellite dish for satellite signal reception. satellite dish in the QSD (Quality Satellite Dish) series, of an extremely high quality, achieved after undergoing the most stringent controls to ensure the best behaviour and robustness.Grouped product items Ref. 790202 Colour: Graphite, Supply method: Single packing -
Televes QSD75 aluminium offset dishes – White
KSh 4,500.00Add to cartQuality signal reception for life
75 cm x 85 cm offset aluminium satellite dish for satellite signal reception. satellite dish in the QSD (Quality Satellite Dish) series, of an extremely high quality, achieved after undergoing the most stringent controls to ensure the best behaviour and robustness.Grouped product items Ref. 790204 Colour: White, Supply method: Single packing -
Add to cartQuality signal reception for life
85 cm x 95 cm offset aluminium dish for satellite signal reception. satellite dish in the QSD (Quality Satellite Dish) series, of an extremely high quality, achieved after undergoing the most stringent controls to ensure the best behaviour and robustness. -
Add to cartQuality signal reception for life
85 cm x 95 cm offset aluminium dish for satellite signal reception. satellite dish in the QSD (Quality Satellite Dish) series, of an extremely high quality, achieved after undergoing the most stringent controls to ensure the best behaviour and robustness. -
Add to cartQuality signal reception for life
85 cm x 95 cm offset aluminium dish for satellite signal reception. satellite dish in the QSD (Quality Satellite Dish) series, of an extremely high quality, achieved after undergoing the most stringent controls to ensure the best behaviour and robustness. -
Add to cartDesigned to last
63 cm x 57 cm offset aluminium satellite dish for satellite signal reception.
Provides an outstanding performance against corrosion, thanks to the aluminium reflector and the stainless steel screws.
The structure was designed to make the mounting easier. -
Add to cartDesigned to last
63 cm x 57 cm offset aluminium satellite dish for satellite signal reception.
Provides an outstanding performance against corrosion, thanks to the aluminium reflector and the stainless steel screws.
The structure was designed to make the mounting easier. -
Add to cartDesigned to last
63 cm x 57 cm offset aluminium satellite dish for satellite signal reception.
Provides an outstanding performance against corrosion, thanks to the aluminium reflector and the stainless steel screws.
The structure was designed to make the mounting easier. -
Add to cartDesigned to last
63 cm x 57 cm offset aluminium satellite dish for satellite signal reception.
Provides an outstanding performance against corrosion, thanks to the aluminium reflector and the stainless steel screws.
The structure was designed to make the mounting easier. -
Add to cart
Designed to last
Offset aluminium satellite dish for the reception of satellite signals.
Provides an outstanding performance against corrosion, thanks to the aluminium reflector and the stainless steel screws.
The structure was designed to make the mounting easier. -
Add to cart
Designed to last
Offset aluminium satellite dish for the reception of satellite signals.
Provides an outstanding performance against corrosion, thanks to the aluminium reflector and the stainless steel screws.
The structure was designed to make the mounting easier. -
Add to cart
Designed to last
Offset aluminium satellite dish for the reception of satellite signals.
Provides an outstanding performance against corrosion, thanks to the aluminium reflector and the stainless steel screws.
The structure was designed to make the mounting easier. -
Televes ISD 830 aluminium satellite dish 83x75cm – White
KSh 12,000.00Add to cartDesigned to last
Offset aluminium satellite dish for the reception of satellite signals.
Provides an outstanding performance against corrosion, thanks to the aluminium reflector and the stainless steel screws.
The structure was designed to make the mounting easier. -
Add to cartLarge offset aluminium satellite dish (141 cm x 130 cm) for the reception of satellite signals in areas with reduced satellite coverage footprint.
Supplied in white colour (RAL 9002) and individual packing. -
Add to cartSingle universal LNB converter, equipped with a single output and the four polarity/band combinations (Hh, Hl, Vh, Vl).
Supplied in individual packing. -
Televes Twin LNB offset 2 outputs: Hh/Vh/Hl/Vl
KSh 3,000.00Add to cartTwin LNB converter, equipped with two universal outputs, each with the four polarity/band combinations (Hh, Hl, Vh, Vl).
Supplied in individual packing. -
Televes Quad LNB offset 4 outputs: Hh/Vh/Hl/Vl
KSh 4,500.00Add to cartQuad LNB converter, equipped with four universal outputs, each with the four polarity/band combinations (Hh, Hl, Vh, Vl).
Supplied in individual packing. -
Televes Quattro LNB offset 4 outputs: Hh-Vh-Hl-Vl
KSh 5,500.00Add to cartQuatro LNB converter, equipped with four outputs, each with one specific polarity/band combination (Hh, Hl, Vh, Vl). Each output is marked with the respective colour: black for Vl, red for Vh, yellow for Hh, and green for Hl.
Supplied in individual packing. -
Televes Octo LNB offset 8 outputs: Hh/Vh/Hl/Vl
KSh 9,000.00Add to cartOcto LNB converter, equipped with eight universal outputs, each with the four polarity/band combinations (Hh, Hl, Vh, Vl).
Supplied in individual packing.
