Ubiquiti UISP Wave Nano
60 GHz PtMP station powered by Wave Technology.
The Wave Nano can connect to a Ubiquiti Wave AP and deliver 2 Gbps total
throughput (1 Gbps duplex). The Wave Nano is equipped with a high-performance
5GHz backup radio to ensure uninterrupted connection and a Bluetooth radio to
simplify setup via the UISP® Mobile app.
Compatibility and supported distances:
— Wave AP – 5 km link range
— Wave AP Micro – 4 km link range
Features:
2 Gbps max. throughput (1 Gbps duplex)
5 GHz 800+ Mbps weather-resilient backup radio
(1) GbE RJ45 port
Integrated GPS & Bluetooth
Link planning support via ISP Design Center
Managed with UISP application: Version 1.4.5 and later
Starlink Approved Installers Kenya.
Starlink will provide our customers with a world-class satellite internet experience that has never been available before across the most remote places in Africa.
We also offer other services like activating public Wi-Fi, data management plans, billing solution for areas where we need to monetize the network and much more.
info@starlinkinstallerskenya.com
www.starlinkinstallerskenya.com| Brand |
|---|
Related products
-
Read moreUbiquiti GigaBeam
airMAX AC 60 GHz/5 GHz Radio with 1+ Gbps ThroughputThe GigaBeam is a 60 GHz radio designed for low-interference and
high-throughput connectivity. It includes a 5 GHz radio for failover. For the
60 GHz link, the GigaBeam supports full bandwidth use of 2.16 GHz. The
dedicated management radio allows easy setup via Wi-Fi.Features:
60 GHz radio with 5 GHz radio backup
Low-interference 60 GHz spectrum
Up to 1+ Gbps with low latency
2.4 GHz management radio
Full bandwidth support: 2.16 GHzSpecifications:
Enclosure UV-Resistant Polycarbonate
Gain
5 GHz
60 GHz
10 dBi
17.2 dBi
Networking Interface 10/100/1000 Ethernet Port
Wi-Fi for Management
Max. Power Consumption 11W
Power Method Passive PoE (Pairs 4, 5+; 7, 😎
Power Supply 24V, 0.5A Gigabit PoE Adapter (Included)
Mounting Pole-Mount (Kit Included)
Wall-Mount (Not Included)
ESD/EMP Protection ± 24kV Contact/Air
Operating Temperature -40 to 60° C (-40 to 140° F)
Operating Humidity 5 to 95% Noncondensing
CertificationsCE, FCC, IC
Max. Conducted TX Power
5/60 GHz Combined
25 dBm
Channel Bandwidth
60 GHz
5 GHz
2160 MHz
20/40/80 MHz
Opearating Frequency
Worldwide 5.180 – 5.875
57 – 66 -
Read moreMulti-gigabit, 60 GHz bridge with SFP+
support and a 2 km link range.The airFiber 60 HD (AF60 HD) is a 60 GHz radio designed to create superior
mid-range, point-to-point (PtP) links up to 2 km. The AF60 HD delivers
low-interference, low-latency throughput within the 60 GHz spectrum. Compact
and highly durable, the AF60 HD also features integrated GPS and a Bluetooth
management radio to simplify setup, configuration, and monitoring. This
bridge is ideal for ISPs looking to maximize signal linking with
cost-effective equipment.Features:
Low-interference 60 GHz spectrum
Up to a 2 km link range
Supports channel bonding to achieve up to a 6 Gbps throughput rate
(1) 10G SFP+ port
Terragraph-certified
Integrated GPS
Link planning support via ISP Design Center
Simple, Bluetooth-powered setup with the UISP™ Mobile app -
Read moreGPON C+ Optical Transceiver
The UFiber™ OLT’s GPON SFP ports are designed for use with the UF-GP-C+ SFP
module. -
Read moreUbiquiti Gigabit 24V (0.5A) PoE
AdapterUbiquiti Networks™ offers Power over Ethernet (PoE) Adapters to power a
variety of Ubiquiti products. The PoE Adapters are compatible with most
Ubiquiti PoE devices. Ubiquiti’s PoE Adapters also provide a variety of
safety features, to help protect your Ubiquiti hardware, such as:Surge protection
Clamping protection
Maximum surge discharge
Peak pulse current
AC cable with earth ground
ESD attacks are the leading cause for device failures. You can effectively
protect against ESD attacks using a grounded Ubiquiti PoE Adapter, shielded
outdoor Ethernet cable, and shielded RJ-45 connectors.Please note that no power cable is included with this PoE injector. A
clover to SA 3pin power cord is available to purchase separately:
https://shop.dbg.co.za/powcnd5.htmlYou can also consider making use of the UltraLAN PoE injectors as a cost
affective alternative:UltraLAN Gigabit PoE Adapter – 24V 0.6A (15W)
UltraLAN Gigabit PoE Adapter – 24V 1.5A (30W)
UltraLAN Gigabit PoE Adapter – 48V 0.3A (15W) -
Read moreUbiquiti Gigabit 24V (0.3A) PoE
AdapterUbiquiti Networks™ offers Power over Ethernet (PoE) Adapters to power a
variety of Ubiquiti products. The PoE Adapters are compatible with most
Ubiquiti PoE devices. Ubiquiti’s PoE Adapters also provide a variety of
safety features, to help protect your Ubiquiti hardware, such as:Surge protection
Clamping protection
Maximum surge discharge
Peak pulse current
AC cable with earth ground
ESD attacks are the leading cause for device failures. You can effectively
protect against ESD attacks using a grounded Ubiquiti PoE Adapter, shielded
outdoor Ethernet cable, and shielded RJ-45 connectors.Please note that no power cable is included with this PoE injector. A
clover to SA 3pin power cord is available to purchase separately:
https://shop.dbg.co.za/powcnd5.htmlYou can also consider making use of the UltraLAN PoE injector as a cost
affective alternative:UltraLAN Gigabit PoE Adapter – 24V 0.6A (15W)
UltraLAN Gigabit PoE Adapter – 24V 1.5A (30W)
UltraLAN Gigabit PoE Adapter – 48V 0.3A (15W)
Reviews
There are no reviews yet.