Category: Starlink Accessories
Starlink Accessories
Showing 721–772 of 772 resultsSorted by popularity
-
Add to cartThe 30 m (98 ft) Router Cable is designed to replace the standard 2 m cable from the High Performance Starlink Kit when additional length is needed between the Power Supply and the Starlink Router.Compatibility: High Performance Starlink Kit, Flat High Performance Starlink KitPackage Dimensions:
Lenght: 10.63 in / 67 cm, Width: 11.81 in / 27 cm, Height: 2.64 in / 30 cm
Package Weight:
1.9 kg / 4.19 lb
-
Add to cartThe 8 m (26.2 ft) Starlink Cable is designed to replace the cable between the Flat High Performance Starlink and the Power Supply in case of damage.Compatibility: Flat High Performance Starlink KitPackage Dimensions:
Lenght: 7.9 in / 62 mm, Width: 8.5 in / 201 mm, Height: 2.4 in / 216 mm
Package Weight:
0.95 kg / 2 lb
-
Add to cartThe 5 m (16.5 ft) Ethernet Cable is designed to replace the cable from the High Performance Starlink Kit between the Power Supply and the RJ45 connector (for third party routers or devices).Compatibility: High Performance Starlink Kit, Flat High Performance StarlinkPackage Dimensions:
Lenght: 8.3 in / 60 mm, Width: 8.9 in / 210 mm, Height: 2.4 in / 225 mm
Package Weight:
0.42 kg / 0.93 lb
-
Starlink Ground Pole Mount – V2 / Gen 2 Dish
KSh 25,000.00Add to cartDesigned for in-ground installation when roof or wall mounting is not possible. Requires digging.Compatibility: Rectangular StarlinkTools Needed: Shovel, Mortar Hoe, Mixing Trough / Bucket, Gloves, Concrete Mix, and WaterMount Dimensions: Height: 88.9″ / 225.8 cm, Outer Diameter: 1.88″ / 4.8 cm, Inner Diameter: 1.75″ / 4.45 cmPackage Dimensions:
Lenght: 4.5 in / 11.5 cm, Width: 45.7 in / 116 cm, Height: 2.4 in / 6.1 cm
Package Weight:
4.27 kg / 9.5 lb
-
Starlink 15 m Mini Starlink Ethernet Cable
KSh 25,000.00Add to cartThe 15 m (49.2 ft) Mini Starlink Ethernet Cable is designed to be used in the RJ45 connectors between the Starlink Mini and Starlink Gen 3 router or third party routers and devices to provide a waterproof seal and protect against water ingress.
Compatibility:Mini StarlinkPackage Dimensions: 135 x 50 x 360 mm (5.3 x 2 x 14.2 in)Package Weight: 1 kg (2.2 lbs)Package Dimensions:
Lenght: 5.3 in / , Width: 14.2 in / , Height: 2 in /
Package Weight:
/ 2.2 lb
-
Add to cartThe Mobility Mount is designed to create a waterproof seal and protect against water ingress when permanently mounting to wood, fiberglass, metal, plastic and slotted rails on vehicle racks. The Mobility Mount features stainless steel fasteners, which are corrosion resistant to support harsh environments. This durable and versatile mount also supports an 8 degree mounting angle to maintain a signal during extreme and wet weather conditions.
Package Dimensions:
Lenght: 7.3 in / 185.5 mm, Width: 9.8 in / 249.9 mm, Height: 3.4 in / 86 mm
Package Weight:
880 g / 1.94 lb
-
Starlink Standard Power Supply Mount For Gen 3 Flat Dish
KSh 15,000.00Add to cartThe Power Supply Mount is designed to mount the power supply directly to a wall or other surface.It is ideal for your home or office use when no desk space is available, or for mobility applications where space efficiency is paramount. Once the Power Supply Mount is installed, the power supply is easily snapped into place and cable retention ensures the input power cable is not accidentally pulled out.Compatibility: Starlink Standard Power SupplyRecommended Tools: Drill, Marker, #2 Phillips Screwdriver, 4 mm (5/32 in) Drill bit (no anchors) or 7 mm (9/32 in) Drill bit (wall anchors)Package Dimensions: 25 x 16.5 x 8.5 cm / 9.8″ x 6.5″ x 3.3″Package Weight: 0.34 kg (0.75 lbs)Package Dimensions:
Lenght: 3.3 in / 8.5 cm, Width: 6.5 in / 16.5 cm, Height: 9.8 in / 25 cm
Package Weight:
0.34 kg / 0.75 lb
-
Add to cartThe Router Mount is designed to mount the Gen 3 Router directly to a wall or other surface. It is ideal for home or office use when no desk space is available, or for mobility applications where space efficiency is paramount. Once the Router Mount is installed, the Gen 3 Router is easily snapped into place and cable retention ensures the cables are not accidentally pulled out.
Compatibility: Starlink Gen 3 RouterRecommended Tools: Drill, Marker, #2 Phillips Screwdriver, 4 mm (5/32 in) Drill bit (no anchors) or 7 mm (9/32 in) Drill bit (wall anchors)Package Dimensions: 25 x 16.5 x 8.5 cm / 9.8″ x 6.5″ x 3.3″Package Weight: 0.34 kg (0.75 lbs)Package Dimensions:
Lenght: 3.3 in / 8.5 cm, Width: 16.5 in / 16.5 cm, Height: 9.8 in / 25 cm
Package Weight:
0.34 kg / 0.75 lb
-
5 Port Gigabit Unmanaged Ethernet Switch
KSh 10,000.00Add to cartInstead of only connecting a single network device – you can use this switch along with the Starlink Ethernet adapter to enable you to have multiple hardwire connections! In other words, hardwire your laptops, printers, and other network devices that support an ethernet connection. Not complicated setup required, just plug and play!
With this network switch you can:1) Connect up to 4 network devices (the 5th port located far right on the picture displayed, is where you will connect your ethernet cable that connects to your Starlink Ethernet Adapter).2) Ultra fast gigabit data transfer – Good for when you are downloading large files.3) May improve network connectivity.Package Dimensions:
Lenght: / , Width: / , Height: /
Package Weight:
-
Starlink Cable Routing Kit
KSh 14,000.00Add to cartDesigned for drilling through most walls. Not recommended for masonry, concrete, or hard coat stucco. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a 3/4″ (1.9 cm) spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall clips.
Package Dimensions:
Lenght: 5.25 in / 4.4 cm, Width: 3.75 in / 13.3 cm, Height: 1.75 in / 34.9 cm
Package Weight:
0.38 kg / 0.83 lb
-
Starlink Masonry Routing Kit
KSh 20,000.00Add to cartDesigned for drilling through masonry, concrete or hard coat stucco (excluding EIFS) walls. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a 3/4″ (1.9 cm) spade bit, drill bits, cable routing tool, silicone sealant, grommets, and wall clips.
Package Dimensions:
Lenght: 6.5 in / 4.4 cm, Width: 13.88 in / 16.5 cm, Height: 1.75 in / 35.2 cm
Package Weight:
1 kg / 2.1 lb
-
Add to cartThe 30 m (98 ft) Ethernet Cable is designed to replace the standard 5 m cable from the High Performance Starlink Kit when additional length is needed between the Power Supply and the RJ45 connector (for third party routers or devices).Compatibility: High Performance Starlink Kit, Flat High Performance StarlinkPackage Dimensions:
Lenght: 2.64 in / 27 cm, Width: 11.81 in / 6.7 cm, Height: 10.63 in / 30 cm
Package Weight:
1.9 kg / 4.19 lb
-
Add to cartThe 25 m (82 ft) Starlink Cable is designed to replace the cable between the Flat High Performance Starlink and the Power Supply when additional length is needed.Compatibility: Flat High Performance Starlink KitPackage Dimensions:
Lenght: 20.3 in / 6.4 cm, Width: 8.7 in / 51.6 cm, Height: 2.5 in / 22 cm
Package Weight:
2.9 kg / 6.39 lb
-
Add to cartThe 0.5 m (1.6 ft) Starlink Cable is designed to replace the cable between the Flat High Performance Starlink and the Power Supply when shorter length is needed.Compatibility: Flat High Performance Starlink KitPackage Dimensions:
Lenght: 5.5 in / 87 mm, Width: 8.3 in / 150 mm, Height: 3.4 in / 210 mm
Package Weight:
0.25 kg / 0.44 lb
-
Add to cartThe 2 m (6.5 ft) Router Cable is designed to replace the standard cable from the High Performance Starlink Kit between the Power Supply and the Starlink Router in case of damage.Compatibility: High Performance Starlink Kit, Flat High Performance Starlink KitPackage Dimensions:
Lenght: 8.3 in / 60 mm, Width: 8.9 in / 210 mm, Height: 2.4 in / 225 mm
Package Weight:
0.42 kg / 0.93 lb
-
Starlink Travel Case – Hard Case – Gen 2 / V2 Dish
KSh 70,000.00Add to cartThe Starlink team has developed the Starlink Travel Case to make it easier to transport your rectangular Starlink kit safely wherever you go. Great for RV travel, vacations, and temporary portable use.Features include a hard shell case with zipper, backpack straps, and handles on the top and side. Fits all items that came in your Starlink Kit including the router, base, and cables.Compatibility: Rectangular Starlink KitPackage Dimensions:
Lenght: 17 in / 43.2 cm, Width: 25.5 in / 64.8 cm, Height: 13.25 in / 33.7 cm
Package Weight:
4.5 kg / 10 lb
-
Starlink Mini Pivot Mount
KSh 25,000.00Add to cartThe Starlink Mini Pivot Mount is perfect for installation on slanted, shingled roofs. Designed for ease of use and flexibility, the Pivot Mount swiveling mechanism enables effortless fine-tuning, adapting to various angles and directions, thus maximizing the performance of your Starlink.
Crafted from durable, weather-resistant materials, the mount ensures a sturdy and enduring foundation for your Starlink, capable of withstanding various environmental conditions. Its elongated design allows for greater flexibility in positioning, enabling easy alignment and adjustment to maximize signal reception.The Pivot Mount is engineered for easy installation and is accompanied by all necessary hardware and user-friendly instructions, ensuring a hassle-free setup process.Compatibility: Starlink MiniTools Needed: Drill, 6 mm (1/4 in) drill bit, 9/16 in Hex Socket, Marker, LevelPackage Dimensions: 270 x 360 x 95 mm (10.6” x 14.2″ x 3.7”)Package Weight: 1.8 kg (4.0 lbs)Package Dimensions:
Lenght: 10.6 in / , Width: 14.2 in / , Height: 3.7 in /
Package Weight:
/ 4 lb
-
Starlink Mini Wall Mount
KSh 22,000.00Add to cartThe Starlink Mini Wall Mount is designed for installation on an exterior wall near the top of the gable or fascia. This wall mount can accommodate a 4” overhang maximum and offers a secure, long-reaching platform to optimize the placement of your Starlink for the best connectivity and performance.
Crafted from durable, weather-resistant materials, the mount ensures a sturdy and enduring foundation for your Starlink, capable of withstanding various environmental conditions. Its elongated design allows for greater flexibility in positioning, enabling easy alignment and adjustment to maximize signal reception.Easy to install and adjust, the wall mount comes with all necessary hardware and instructions, simplifying the setup process for a hassle-free experience.Compatibility: Starlink Mini, 4” Overhang MaximumTools Needed: Drill, 6 mm (1/4 in) Drill Bit, 9/16 in Hex Socket, Marker, LevelPackage Dimensions: 270 x 360 x 95 mm / 10.6” x 14.2″ x 3.7”Package Weight: 1.5kg / 3.3 lbsPackage Dimensions:
Lenght: 10.6 in / , Width: 14.2 in / , Height: 3.7 in /
Package Weight:
/ 3.3 lb
-
Starlink Ethernet Adapter Mount + Starlink Router Mount 2 in 1 Combo | Black Bracket Only
KSh 10,000.00Add to cartProduct features:
– Durable hard plastic material- Combo pack, Router + Ethernet Adapter 2 in 1- Great for organizing Starlink setup- Comes in black and white- Easy to installCompatible with Gen 2 Starlink Ethernet Adapter and Mount*As with most 3D printed parts/pieces, there WILL be bumps, humps, dips, lines, edges, fuzzy areas, miscolored spots, streaks, etc that in no way affect the usability, strength, or performance of this product.**Plastic is NOT designed for outdoor use or to be used in extreme temperatures as warping and/or sagging could occur. Leaving out in the summer heat not recommended. Use indoors in moderate temperatures.**Screws or other components used to mount the unit are not included.***This listing DOES NOT include Starlink equipment***Package Dimensions:
Lenght: 4 in / , Width: 8 in / , Height: 4.5 in /
Package Weight:
5 oz / 0.3 lb
-
Starlink Ethernet Adapter Mount + Starlink Router Wall Mount 2 in 1 Combo | White Bracket Only
KSh 10,000.00Add to cartProduct features:
– Durable hard plastic material- Combo pack, Router + Ethernet Adapter 2 in 1- Great for organizing Starlink setup- Comes in black and white- Easy to installCompatible with Gen 2 Starlink Ethernet Adapter and Mount*As with most 3D printed parts/pieces, there WILL be bumps, humps, dips, lines, edges, fuzzy areas, miscolored spots, streaks, etc that in no way affect the usability, strength, or performance of this product.**Plastic is NOT designed for outdoor use or to be used in extreme temperatures as warping and/or sagging could occur. Leaving out in the summer heat not recommended. Use indoors in moderate temperatures.**Screws or other components used to mount the unit are not included.***This listing DOES NOT include Starlink equipment***Package Dimensions:
Lenght: 4 in / 11.43 cm, Width: 4.5 in / 10.16 cm, Height: 8 in / 20.32 cm
Package Weight:
5 oz / 0.33 lb
-
Add to cartDesigned to mount and fit (like a glove) the Starlink Ethernet Adapter for Gen 2. Comes in black and white variations. Please message us on chat or email us at cs@ntcommerce.co with your order number and let us know which color you would like. Otherwise, we will reach out to you using the email you provide us.
Key Features:– Snug fit for stability- Simple design to take up even less space than similar products.- Easy installation (2 screws).Package Dimensions:
Lenght: / 1 cm, Width: / 5 cm, Height: / 9 cm
Package Weight:
/ 3 oz
-
Starlink Ethernet Adapter Mount w/ Quick Release – Ships Same Day! Available in Black or White
KSh 18,000.00Add to cartDesigned to mount and fit (like a glove) the Starlink Ethernet Adapter for Gen 2. Comes in black and white variations. Please message us on chat or email us at cs@ntcommerce.co with your order number and let us know which color you would like. Otherwise, we will reach out to you using the email you provide us.
Key Features:– Quick Release Mechanism allows for the Ethernet Adapter to “click in and out” to hold the adapter in place or removed.- Snug fit for stability- Simple design to take up even less space than similar products.- Easy installation (2 screws).Package Dimensions:
Lenght: / 1 cm, Width: / 5 cm, Height: / 9 cm
Package Weight:
/ 3 oz
-
10 Port Gigabit Unmanaged Ethernet Switch
KSh 16,000.00Add to cartInstead of only connecting a single network device – you can use this switch along with the Starlink Ethernet adapter to enable you to have multiple hardwire connections! In other words, hardwire your laptops, printers, and other network devices that support an ethernet connection. Not complicated setup required, just plug and play!
With this network switch you can:1) Connect up to 8 network devices – the other 2 ports (2 uplink ports) located in the far right on the displayed picture is where you will connect your ethernet cable that connects to your Starlink Ethernet Adapter).2) Ultra fast gigabit data transfer – Good for when you are downloading large files.3) May improve network connectivity.4) Quiet when powered on.Package Dimensions:
Lenght: / , Width: / , Height: /
Package Weight:
-
Starlink High Performance 25M / 82 FT POE Cable
KSh 60,000.00Add to cartThe 25 m (82 ft) Starlink Cable is designed to replace the cable from the High Performance Starlink Kit (between the Starlink and the Power Supply) in case of damage.Compatibility: High Performance Starlink KitPackage Dimensions:
Lenght: 20.3 in / 6.4 cm, Width: 8.7 in / 51.6 cm, Height: 2.5 in / 22 cm
Package Weight:
2.9 kg / 6.39 lb
-
Starlink Flat High Performance Pipe Adapter
KSh 50,000.00Add to cartDesigned to attach to any pole with a max diameter of 2.4″ (62 mm). Slide adapter over the top of the existing pole, fasten provided screws, and drop Starlink in. Requires Wedge Mount Kit that comes with Flat High Performance Starlink.Compatibility: Flat High Performance Starlink KitPackage Dimensions:
Lenght: 6.5 in / 7.9 cm, Width: 10.4 in / 16.5 cm, Height: 3.1 in / 26.4 cm
Package Weight:
1.1 kg / 2.4 lb
-
Starlink Mesh WiFi Router – New In Box
KSh 45,000.00Add to cartStarlink Mesh WiFi Routers wirelessly extend your WiFi network throughout your home to provide a more reliable connection and faster speeds to areas where extra coverage may be needed.
Package Dimensions:
Lenght: 11.3 in / 10 cm, Width: 8.8 in / 28.6 cm, Height: 4 in / 22.4 cm
Package Weight:
1.72 kg / 3.75 lb
-
Starlink 150 FT Replacement Cable for Gen2 / V2 Dish
KSh 50,000.00Add to cartThe 150’ cable is designed to replace the standard 75’ cable from the Starlink Kit when additional length is needed between your install location and the router.Package Dimensions:
Lenght: 3.5 in / 8.9 cm, Width: 12.2 in / 31.1 cm, Height: 12.8 in / 32.3 cm
Package Weight:
2.75 kg / 6 lb
-
Add to cartDesigned to attach to any pole with a max diameter of 2.5″ (64 mm). Slide adapter over the top of the existing pole, fasten provided screws, and drop Starlink in.* INTERNATIONAL SHIPPING: ALL TAXES AND DUTIES ARE PAID BY THE BUYERPackage Dimensions:
Lenght: 5.5 in / 14 cm, Width: 8.3 in / 21 cm, Height: 3.4 in / 8.7 cm
Package Weight:
0.6 kg / 1.35 lb
-
Add to cartDesigned for installation on shingled roofs, requires drilling. Not recommended for tile, slate, and clay roofing. For best results, the mount should be adjusted to ensure Starlink is installed as close to vertical as possible.Tools Needed: Drill, 1/2″ (12.7 mm) Socket Wrench, 5/32″ (4 mm) Drill BitMount Dimensions: Length: 8.66″ / 22 cm, Width: 4.3″ / 11 cm, Height: 6.14″ / 15.6 cm* INTERNATIONAL SHIPPING: ALL TAXES AND DUTIES ARE PAID BY THE BUYERPackage Dimensions:
Lenght: 5.5 in / 24.7 cm, Width: 9.7 in / 14 cm, Height: 3.1 in / 7.9 cm
Package Weight:
1 oz / 2.2 lb
-
Read more- *High-Speed Connectivity: XLTTYWL starlink cable kit features Dishy Cable with RJ45 connectors, utilizing the T568B pinout for reliable high-speed connectivity at 10/100/1000 Mb/s.
- *Temperature Resilience: Designed to withstand diverse environmental conditions, the starlink cable operates seamlessly in temperatures ranging from -20 to +55 °C, ensuring optimal performance in various climates.
- *Versatile Humidity Tolerance: With an operating humidity range of 10% – 90% (non-condensing), the cable maintains stability and functionality even in humid conditions, making it suitable for diverse environments.
- *Efficient Storage: The starlink accessories is built to endure storage conditions, with a storage temperature range of -40 to +70 °C, ensuring reliability and longevity when not in use.
- *PoE Injector Compatibility: Easily connect your Starlink Satellite Dish V2 to a Power over Ethernet (PoE) Injector for efficient power delivery and a streamlined setup process.
DM•Text•Call 24/7 Support
+254 100 720022 / +254 720 548999
info@starlinkinstallerskenya.com
www.starlinkinstallerskenya.com
-
Read moreDM•Text•Call 24/7 Support+254 100 720022 / +254 720 548999 info@starlinkinstallerskenya.com www.starlinkinstallerskenya.com
-
Read moreDM•Text•Call 24/7 Support+254 100 720022 / +254 720 548999 info@starlinkinstallerskenya.com www.starlinkinstallerskenya.com -
Read moreDM•Text•Call 24/7 Support+254 100 720022 / +254 720 548999 info@starlinkinstallerskenya.com www.starlinkinstallerskenya.com -
Add to cartDM•Text•Call 24/7 Support+254 100 720022 / +254 720 548999 info@starlinkinstallerskenya.com www.starlinkinstallerskenya.com -
Add to cartDM•Text•Call 24/7 Support+254 100 720022 / +254 720 548999 info@starlinkinstallerskenya.com www.starlinkinstallerskenya.com -
Add to cartDM•Text•Call 24/7 Support+254 100 720022 / +254 720 548999 info@starlinkinstallerskenya.com www.starlinkinstallerskenya.com -
Starlink Satellite Ethernet Adapter
KSh 10,000.00Add to cartDM•Text•Call 24/7 Support+254 100 720022 / +254 720 548999 info@starlinkinstallerskenya.com www.starlinkinstallerskenya.com -
Starlink Ethernet Adapter For Wired External Network
KSh 10,000.00Add to cartDM•Text•Call 24/7 Support+254 100 720022 / +254 720 548999 info@starlinkinstallerskenya.com www.starlinkinstallerskenya.com -
STARLINK TRAVEL CASE KENYA
KSh 50,000.00Add to cart*Price includes shipping and handling fees
The Starlink team has developed the Starlink Travel Case to make it easier to transport your rectangular Starlink kit safely wherever you go. Great for RV travel, vacations, and temporary portable use.Features include a hard shell case with zipper, backpack straps, and handles on the top and side. Fits all items that came in your Starlink Kit including the router, base, and cables.Compatibility: Rectangular Starlink KitPackage Dimensions: 25.5″ x 17″ x 13.25″ / 64.8 x 43.2 x 33.7 cmPackage Weight: 10 lbs / 4.5 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK FLASHING MOUNT KENYA
KSh 25,000.00Add to cart*Price includes shipping and handling fees
Designed for water-tight protection when installing Starlink on shingles or siding and provides storage for extra cable. Requires additional purchase of Pivot Mount.Tools Needed: Drill, Phillips Head Drill Bit, 5/16” (7.9 mm) and 7/16” (11.1 mm) Socket Wrenches, 7/16” (11.1 mm) Wrench, Utility Knife, Pry Bar, Roof Cement, Measuring Tape, Stud Finder, Pencil, and GogglesMount Dimensions: Length: 10.58″ / 26.89 cm, Width: 9.07″ / 23 cm, Height: 1.97″ / 5 cmPackage Dimensions: 15 5/8” x 15 ¼” x 3” / 39.7 x 38.7 x 7.6 cmPackage Weight: 7 lbs / 3.2 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK MESH WIFI ROUTER KENYA
KSh 35,000.00Add to cart*Price includes shipping and handling fees
Starlink Mesh WiFi Routers wirelessly extend your WiFi network throughout your home to provide a more reliable connection and faster speeds to areas where extra coverage may be needed.See installation guide below for more setup details and tips. We recommend a maximum of 3 Mesh WiFi routers per Starlink network setup.
Compatibility: Rectangular Starlink Kit, Starlink App requiredPackage Dimensions: 8.8″ x 11.3″ x 4″ / 22.4 x 28.6 x 10 cmPackage Weight: 3.75 lbs / 1.72 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK LONG WALL MOUNT KENYA
KSh 20,000.00Add to cart*Price includes shipping and handling fees
Designed for installation on an exterior wall near the top of the gable; extra length provides clearance of overhang when needed. Drilling required.Tools Needed: Drill, Stud / Electrical Finder, Socket Wrench, Level, 5/32″ (4 mm) Drill Bit, 0.5″ x 2.5″ (12.5 x 63.5 mm) Socket, PencilMount Dimensions: Length: 16.8″ / 42.7 cm, Width: 4.84″ / 12.3 cm, Height: 4.44″ / 11.3 cmPackage Dimensions: 19.1″ x 5.5″ x 4.7″ / 48.5 x 14 x 11.9 cmPackage Weight: 3.3 lbs / 1.5 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK MASONRY ROUTING KIT KENYA
KSh 18,000.00Add to cart*Price includes shipping and handling fees
Designed for drilling through masonry, concrete or hard coat stucco (excluding EIFS) walls. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a 3/4″ (1.9 cm) spade bit, drill bits, cable routing tool, silicone sealant, grommets, and wall clips.Tools Needed: Hammer, Hammer Drill, Phillips Head Drill Bit, Stud / Electrical Finder, Goggles, Gloves, and MaskPackage Dimensions: 13.875” x 6.5” x 1.75” / 35.2 x 16.5 x 4.4 cmPackage Weight: 2.1 lbs / 1 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK GROUND POLE MOUNT KENYA
KSh 22,000.00Add to cart*Price includes shipping and handling fees
Designed for in-ground installation when roof or wall mounting is not possible. Requires digging.Compatibility: Rectangular Starlink
Tools Needed: Shovel, Mortar Hoe, Mixing Trough / Bucket, Gloves, Concrete Mix, and WaterMount Dimensions: Height: 88.9″ / 225.8 cm, Outer Diameter: 1.88″ / 4.8 cm, Inner Diameter: 1.75″ / 4.45 cmPackage Dimensions: 45.7” x 4.5” x 2.4” / 116 x 11.5 x 6.1 cmPackage Weight: 9.43 lbs / 4.27 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK PIVOT MOUNT KENYA
KSh 18,000.00Add to cart*Price includes shipping and handling fees
Designed for installation on shingled roofs, requires drilling. Not recommended for tile, slate, and clay roofing. For best results, the mount should be adjusted to ensure Starlink is installed as close to vertical as possible.Tools Needed: Drill, 1/2″ (12.7 mm) Socket Wrench, 5/32″ (4 mm) Drill BitMount Dimensions: Length: 8.66″ / 22 cm, Width: 4.3″ / 11 cm, Height: 6.14″ / 15.6 cmPackage Dimensions: 9.7″ x 5.5″ x 3.1″ / 24.7 x 14 x 7.9 cmPackage Weight: 2.2 lbs / 1.0 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK 75 FT REPLACEMENT CABLE KENYA
KSh 30,000.00Add to cart*Price includes shipping and handling fees
The 75’ cable is designed to replace the standard 75’ cable from the Starlink Kit in case of damage.Tools Needed: N/APackage Dimensions: 5.8″ x 2″ x 17.1″ / 14.9 x 5.1 x 43.6 cmPackage Weight: 3 lbs / 1.4 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK 150 FT REPLACEMENT CABLE KENYA
KSh 35,000.00Add to cart*Price includes shipping and handling fees
The 150’ cable is designed to replace the standard 50’ cable from the Starlink Kit when additional length is needed between your install location and the router.Tools Needed: N/APackage Dimensions: 12.2” x 3.5” x 12.8” / 31.1 x 8.9 x 32.3 cmPackage Weight: 6 lbs / 2.75 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK ETHERNET ADAPTER KENYA
Original price was: KSh 25,000.00.KSh 15,000.00Current price is: KSh 15,000.00.Add to cart*Price includes shipping and handling fees
The Starlink Ethernet Adapter is designed to connect a device directly to the Starlink router for a wired Internet connection. Supports up to 1 Gbps speeds. NOTE: This product is for indoor use only.Tools Needed: N/APackage Dimensions: 6.5” x 4.5” x 1.5” / 16.5 x 11.4 x 3.6 cmPackage Weight: 0.33 lbs / 0.15 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK PIPE ADAPTER KENYA
KSh 18,000.00Add to cart*Price includes shipping and handling fees
Designed to attach to any pole with a max diameter of 2.5″ (64 mm). Slide adapter over the top of the existing pole, fasten provided screws, and drop Starlink in.Tools Needed: N/APackage Dimensions: 8.3″ x 5.5″ x 3.4″ / 21 x 14 x 8.7 cmPackage Weight: 1.35 lbs / 0.6 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK CABLE ROUTING KIT KENYA
KSh 18,000.00Add to cart*Price includes shipping and handling fees
Designed for drilling through most walls. Not recommended for masonry, concrete, or hard coat stucco. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a 3/4″ (1.9 cm) spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall clips.Tools Needed: Drill, Stud / Electrical FinderPackage Dimensions: 3.75″ x 5.25″ x 1.75″ / 34.9 x 13.3 x 4.4 cmPackage Weight: 0.83 lbs / 0.38 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK SHORT WALL MOUNT KENYA
KSh 20,000.00Add to cart*Price includes shipping and handling fees
Designed for installation on an exterior wall near the top of the gable. Drilling required. For overhang clearance, please reference the installation guide.Tools Needed: Drill, Stud / Electrical Finder, Socket Wrench, Level, 5/32″ (4 mm) Drill Bit, 0.5″ x 2.5″ (12.5 x 63.5 mm) Socket, PencilMount Dimensions: Length: 2.77″ / 7 cm, Width: 2″ / 5.1 cm, Height: 6.02″ / 15.3 cmPackage Dimensions: 8.3″ x 5.5″ x 3.4″ / 21 x 14 x 8.7 cmPackage Weight: 1.4 lbs / 0.6 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK RIDGELINE MOUNT KIT KENYA
KSh 60,000.00Add to cart*Price includes shipping and handling fees
Designed for most rooftops (roof ridgelines) and any flat surface, no drilling required. Ballast weight included with order and shipped separately.Tools Needed: NoneMount Package Dimensions: 29” x 24” x 3.7” / 74 x 61.4 x 9.5 cmMount Package Weight: 11.7 lbs / 5.3 kgBallast Package Dimensions: 16.7” x 4.9” x 7.4” / 42.4 x 12.4 x 18.9 cmBallast Package Weight: 55.8 lbs / 25.3 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
