Starlink Gen 3 Wall Mount Set – New Upgraded Metal Sturdy Mounting Bracket Holder Designed for Starlink Gen 3 Router and Power Supply
Starlink Gen 3 Wall Mount Set – New
Upgraded Metal Sturdy Mounting Bracket Holder Designed for Starlink Gen 3
Router and Power Supply
Starlink Gen 3 Wall Mount Set – New
Upgraded Metal Sturdy Mounting Bracket Holder Designed for Starlink Gen 3
Router and Power Supply
{post_title}
Related products
-
Starlink Flat High Performance Pipe Adapter
KSh 50,000.00Add to cartDesigned to attach to any pole with a max diameter of 2.4″ (62 mm). Slide adapter over the top of the existing pole, fasten provided screws, and drop Starlink in. Requires Wedge Mount Kit that comes with Flat High Performance Starlink.Compatibility: Flat High Performance Starlink KitPackage Dimensions:
Lenght: 6.5 in / 7.9 cm, Width: 10.4 in / 16.5 cm, Height: 3.1 in / 26.4 cm
Package Weight:
1.1 kg / 2.4 lb
-
Add to cartDesigned to mount and fit (like a glove) the Starlink Ethernet Adapter for Gen 2. Comes in black and white variations. Please message us on chat or email us at cs@ntcommerce.co with your order number and let us know which color you would like. Otherwise, we will reach out to you using the email you provide us.
Key Features:– Snug fit for stability- Simple design to take up even less space than similar products.- Easy installation (2 screws).Package Dimensions:
Lenght: / 1 cm, Width: / 5 cm, Height: / 9 cm
Package Weight:
/ 3 oz
-
10 Port Gigabit Unmanaged Ethernet Switch
KSh 16,000.00Add to cartInstead of only connecting a single network device – you can use this switch along with the Starlink Ethernet adapter to enable you to have multiple hardwire connections! In other words, hardwire your laptops, printers, and other network devices that support an ethernet connection. Not complicated setup required, just plug and play!
With this network switch you can:1) Connect up to 8 network devices – the other 2 ports (2 uplink ports) located in the far right on the displayed picture is where you will connect your ethernet cable that connects to your Starlink Ethernet Adapter).2) Ultra fast gigabit data transfer – Good for when you are downloading large files.3) May improve network connectivity.4) Quiet when powered on.Package Dimensions:
Lenght: / , Width: / , Height: /
Package Weight:
-
Add to cartDesigned for installation on shingled roofs, requires drilling. Not recommended for tile, slate, and clay roofing. For best results, the mount should be adjusted to ensure Starlink is installed as close to vertical as possible.Tools Needed: Drill, 1/2″ (12.7 mm) Socket Wrench, 5/32″ (4 mm) Drill BitMount Dimensions: Length: 8.66″ / 22 cm, Width: 4.3″ / 11 cm, Height: 6.14″ / 15.6 cm* INTERNATIONAL SHIPPING: ALL TAXES AND DUTIES ARE PAID BY THE BUYERPackage Dimensions:
Lenght: 5.5 in / 24.7 cm, Width: 9.7 in / 14 cm, Height: 3.1 in / 7.9 cm
Package Weight:
1 oz / 2.2 lb
-
Starlink Ethernet Adapter Mount + Starlink Router Wall Mount 2 in 1 Combo | White Bracket Only
KSh 10,000.00Add to cartProduct features:
– Durable hard plastic material- Combo pack, Router + Ethernet Adapter 2 in 1- Great for organizing Starlink setup- Comes in black and white- Easy to installCompatible with Gen 2 Starlink Ethernet Adapter and Mount*As with most 3D printed parts/pieces, there WILL be bumps, humps, dips, lines, edges, fuzzy areas, miscolored spots, streaks, etc that in no way affect the usability, strength, or performance of this product.**Plastic is NOT designed for outdoor use or to be used in extreme temperatures as warping and/or sagging could occur. Leaving out in the summer heat not recommended. Use indoors in moderate temperatures.**Screws or other components used to mount the unit are not included.***This listing DOES NOT include Starlink equipment***Package Dimensions:
Lenght: 4 in / 11.43 cm, Width: 4.5 in / 10.16 cm, Height: 8 in / 20.32 cm
Package Weight:
5 oz / 0.33 lb
Reviews
There are no reviews yet.