Starlink Gen 3 Router Mount Starlink V3 Power Supply Bracket, Starlink Gen 3 Mount, Metal Wall Mount Kit
Starlink Gen 3 Router Mount Starlink V3
Power Supply Bracket, Starlink Gen 3 Mount, Metal Wall Mount Kit
Starlink Router Wall Mount for Starlink
Gen 3 Router and Power Supply
{post_title}
Related products
-
STARLINK SHORT WALL MOUNT KENYA
KSh 20,000.00Add to cart*Price includes shipping and handling fees
Designed for installation on an exterior wall near the top of the gable. Drilling required. For overhang clearance, please reference the installation guide.Tools Needed: Drill, Stud / Electrical Finder, Socket Wrench, Level, 5/32″ (4 mm) Drill Bit, 0.5″ x 2.5″ (12.5 x 63.5 mm) Socket, PencilMount Dimensions: Length: 2.77″ / 7 cm, Width: 2″ / 5.1 cm, Height: 6.02″ / 15.3 cmPackage Dimensions: 8.3″ x 5.5″ x 3.4″ / 21 x 14 x 8.7 cmPackage Weight: 1.4 lbs / 0.6 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK PIVOT MOUNT KENYA
KSh 18,000.00Add to cart*Price includes shipping and handling fees
Designed for installation on shingled roofs, requires drilling. Not recommended for tile, slate, and clay roofing. For best results, the mount should be adjusted to ensure Starlink is installed as close to vertical as possible.Tools Needed: Drill, 1/2″ (12.7 mm) Socket Wrench, 5/32″ (4 mm) Drill BitMount Dimensions: Length: 8.66″ / 22 cm, Width: 4.3″ / 11 cm, Height: 6.14″ / 15.6 cmPackage Dimensions: 9.7″ x 5.5″ x 3.1″ / 24.7 x 14 x 7.9 cmPackage Weight: 2.2 lbs / 1.0 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK 75 FT REPLACEMENT CABLE KENYA
KSh 30,000.00Add to cart*Price includes shipping and handling fees
The 75’ cable is designed to replace the standard 75’ cable from the Starlink Kit in case of damage.Tools Needed: N/APackage Dimensions: 5.8″ x 2″ x 17.1″ / 14.9 x 5.1 x 43.6 cmPackage Weight: 3 lbs / 1.4 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
10 Port Gigabit Unmanaged Ethernet Switch
KSh 16,000.00Add to cartInstead of only connecting a single network device – you can use this switch along with the Starlink Ethernet adapter to enable you to have multiple hardwire connections! In other words, hardwire your laptops, printers, and other network devices that support an ethernet connection. Not complicated setup required, just plug and play!
With this network switch you can:1) Connect up to 8 network devices – the other 2 ports (2 uplink ports) located in the far right on the displayed picture is where you will connect your ethernet cable that connects to your Starlink Ethernet Adapter).2) Ultra fast gigabit data transfer – Good for when you are downloading large files.3) May improve network connectivity.4) Quiet when powered on.Package Dimensions:
Lenght: / , Width: / , Height: /
Package Weight:
-
STARLINK RIDGELINE MOUNT KIT KENYA
KSh 60,000.00Add to cart*Price includes shipping and handling fees
Designed for most rooftops (roof ridgelines) and any flat surface, no drilling required. Ballast weight included with order and shipped separately.Tools Needed: NoneMount Package Dimensions: 29” x 24” x 3.7” / 74 x 61.4 x 9.5 cmMount Package Weight: 11.7 lbs / 5.3 kgBallast Package Dimensions: 16.7” x 4.9” x 7.4” / 42.4 x 12.4 x 18.9 cmBallast Package Weight: 55.8 lbs / 25.3 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
Reviews
There are no reviews yet.