Starlink Gen 3 Mount, Starlink Power Supply Mounting Kit with Starlink Gen 3 Router Wall Mount for Starlink Gen3 & V3 High Performance Standard Router
Starlink Gen 3 Mount, Starlink Power
Supply Mounting Kit with Starlink Gen 3 Router Wall Mount for Starlink Gen3
& V3 High Performance Standard Router
Say goodbye to signal dead zones and
messy cables, and welcome a seamless online experience with this essential
addition to your Starlink Internet Kit.
Starlink gen 3 mount Key Features: Space Saving, ABS Stability, Effortless
Installation
Installation Guide
The power supply:
1. Secure the mount to the wall using provided screws and anchorsor
No-Drill install using provided adhesive Tape.
2. Tilt the power supply onto the wall mount and center it
3. Press the power to secure it. (If you want to remove power supply, push
the clip of wall mount, and take out the power. )
The router mount:
1. Secure the mount to the wall using provided screws and anchorsor
No-Drill install using provided adhesive Tape.
2. Connect the power cable and RJ45 cable with the router through the
mount.
3. Tilt the router onto the wall mount and center it.
Related products
-
STARLINK GROUND POLE MOUNT KENYA | +254100720022
KSh 22,000.00Add to cart*Price includes shipping and handling fees
Designed for in-ground installation when roof or wall mounting is not possible. Requires digging.Compatibility: Rectangular Starlink
Tools Needed: Shovel, Mortar Hoe, Mixing Trough / Bucket, Gloves, Concrete Mix, and WaterMount Dimensions: Height: 88.9″ / 225.8 cm, Outer Diameter: 1.88″ / 4.8 cm, Inner Diameter: 1.75″ / 4.45 cmPackage Dimensions: 45.7” x 4.5” x 2.4” / 116 x 11.5 x 6.1 cmPackage Weight: 9.43 lbs / 4.27 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK 150 FT REPLACEMENT CABLE KENYA | +254100720022
KSh 35,000.00Add to cart*Price includes shipping and handling fees
The 150’ cable is designed to replace the standard 50’ cable from the Starlink Kit when additional length is needed between your install location and the router.Tools Needed: N/APackage Dimensions: 12.2” x 3.5” x 12.8” / 31.1 x 8.9 x 32.3 cmPackage Weight: 6 lbs / 2.75 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
Starlink 150 FT Replacement Cable for Gen2 / V2 Dish
KSh 50,000.00Add to cartThe 150’ cable is designed to replace the standard 75’ cable from the Starlink Kit when additional length is needed between your install location and the router.Package Dimensions:
Lenght: 3.5 in / 8.9 cm, Width: 12.2 in / 31.1 cm, Height: 12.8 in / 32.3 cm
Package Weight:
2.75 kg / 6 lb
-
STARLINK FLASHING MOUNT KENYA | +254100720022
KSh 25,000.00Add to cart*Price includes shipping and handling fees
Designed for water-tight protection when installing Starlink on shingles or siding and provides storage for extra cable. Requires additional purchase of Pivot Mount.Tools Needed: Drill, Phillips Head Drill Bit, 5/16” (7.9 mm) and 7/16” (11.1 mm) Socket Wrenches, 7/16” (11.1 mm) Wrench, Utility Knife, Pry Bar, Roof Cement, Measuring Tape, Stud Finder, Pencil, and GogglesMount Dimensions: Length: 10.58″ / 26.89 cm, Width: 9.07″ / 23 cm, Height: 1.97″ / 5 cmPackage Dimensions: 15 5/8” x 15 ¼” x 3” / 39.7 x 38.7 x 7.6 cmPackage Weight: 7 lbs / 3.2 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK PIVOT MOUNT KENYA | +254100720022
KSh 18,000.00Add to cart*Price includes shipping and handling fees
Designed for installation on shingled roofs, requires drilling. Not recommended for tile, slate, and clay roofing. For best results, the mount should be adjusted to ensure Starlink is installed as close to vertical as possible.Tools Needed: Drill, 1/2″ (12.7 mm) Socket Wrench, 5/32″ (4 mm) Drill BitMount Dimensions: Length: 8.66″ / 22 cm, Width: 4.3″ / 11 cm, Height: 6.14″ / 15.6 cmPackage Dimensions: 9.7″ x 5.5″ x 3.1″ / 24.7 x 14 x 7.9 cmPackage Weight: 2.2 lbs / 1.0 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
Reviews
There are no reviews yet.