Point to Point Wireless Bridge Outdoor, 2×1000Mbps Ethernet Port ULNA Wireless Bridge CPE801 for PTP/PTMP, Pre-Paired Stable Long Range WiFi Bridge 3 Mile Extend WiFi to Outbuildings Barn Home Office
Point to Point Wireless Bridge Outdoor,
2×1000Mbps Ethernet Port ULNA Wireless Bridge CPE801 for PTP/PTMP, Pre-Paired
Stable Long Range WiFi Bridge 3 Mile Extend WiFi to Outbuildings Barn Home
Office
The wifi bridge point to point outdoor is
configured, easy to install. Just plug wifi bridge in and adjust the
direction. If you need special configuration, please enter the WEB page to
modify it. The point to point wireless bridge outdoor protects your network
from hacking and data leakage through encryption protocols such as WPA and
WPA, Radius with 802.1 x.
Wireless bridge point to point outdoor is made of environmentally friendly
material. Transmits data through the medium of air without wiring and
digging, uses 24V POE to reduce energy consumption. Besides, the outdoor
wireless bridge is waterproof, heat-resistant, freeze-resistant and
thunder-resistant for improved stability in harsh conditions.
{post_title}
Related products
-
STARLINK GROUND POLE MOUNT KENYA
KSh 22,000.00Add to cart*Price includes shipping and handling fees
Designed for in-ground installation when roof or wall mounting is not possible. Requires digging.Compatibility: Rectangular Starlink
Tools Needed: Shovel, Mortar Hoe, Mixing Trough / Bucket, Gloves, Concrete Mix, and WaterMount Dimensions: Height: 88.9″ / 225.8 cm, Outer Diameter: 1.88″ / 4.8 cm, Inner Diameter: 1.75″ / 4.45 cmPackage Dimensions: 45.7” x 4.5” x 2.4” / 116 x 11.5 x 6.1 cmPackage Weight: 9.43 lbs / 4.27 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK LONG WALL MOUNT KENYA
KSh 20,000.00Add to cart*Price includes shipping and handling fees
Designed for installation on an exterior wall near the top of the gable; extra length provides clearance of overhang when needed. Drilling required.Tools Needed: Drill, Stud / Electrical Finder, Socket Wrench, Level, 5/32″ (4 mm) Drill Bit, 0.5″ x 2.5″ (12.5 x 63.5 mm) Socket, PencilMount Dimensions: Length: 16.8″ / 42.7 cm, Width: 4.84″ / 12.3 cm, Height: 4.44″ / 11.3 cmPackage Dimensions: 19.1″ x 5.5″ x 4.7″ / 48.5 x 14 x 11.9 cmPackage Weight: 3.3 lbs / 1.5 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
Starlink Flat High Performance Pipe Adapter
KSh 50,000.00Add to cartDesigned to attach to any pole with a max diameter of 2.4″ (62 mm). Slide adapter over the top of the existing pole, fasten provided screws, and drop Starlink in. Requires Wedge Mount Kit that comes with Flat High Performance Starlink.Compatibility: Flat High Performance Starlink KitTools Needed
+
Package Dimensions:
Lenght: 6.5 in / 7.9 cm, Width: 10.4 in / 16.5 cm, Height: 3.1 in / 26.4 cm
Package Weight:
1.1 kg / 2.4 lb
-
Starlink 150 FT Replacement Cable for Gen2 / V2 Dish
KSh 50,000.00Add to cartThe 150’ cable is designed to replace the standard 75’ cable from the Starlink Kit when additional length is needed between your install location and the router.Package Dimensions:
Lenght: 3.5 in / 8.9 cm, Width: 12.2 in / 31.1 cm, Height: 12.8 in / 32.3 cm
Package Weight:
2.75 kg / 6 lb
-
Add to cartDesigned for installation on shingled roofs, requires drilling. Not recommended for tile, slate, and clay roofing. For best results, the mount should be adjusted to ensure Starlink is installed as close to vertical as possible.Tools Needed: Drill, 1/2″ (12.7 mm) Socket Wrench, 5/32″ (4 mm) Drill BitMount Dimensions: Length: 8.66″ / 22 cm, Width: 4.3″ / 11 cm, Height: 6.14″ / 15.6 cm* INTERNATIONAL SHIPPING: ALL TAXES AND DUTIES ARE PAID BY THE BUYER
Tools Needed
+
Package Dimensions:
Lenght: 5.5 in / 24.7 cm, Width: 9.7 in / 14 cm, Height: 3.1 in / 7.9 cm
Package Weight:
1 oz / 2.2 lb








Reviews
There are no reviews yet.