CHGRNLF Starlink Gen 3 Cable, Replacement Standard V3 Cable for Starlink Gen 3 Cable 23M Waterproof Outdoor Grey (SPX-V3-75FT)
CHGRNLF Starlink Gen 3 Cable, Replacement
Standard V3 Cable for Starlink Gen 3 Cable 23M Waterproof Outdoor Grey
(SPX-V3-75FT)
CHGRNLF Standard Cable for Starlink Gen
3, Outdoor Cable V3 Dish Compatible Only
{post_title}
Related products
-
STARLINK ETHERNET ADAPTER KENYA
Original price was: KSh 25,000.00.KSh 15,000.00Current price is: KSh 15,000.00.Add to cart*Price includes shipping and handling fees
The Starlink Ethernet Adapter is designed to connect a device directly to the Starlink router for a wired Internet connection. Supports up to 1 Gbps speeds. NOTE: This product is for indoor use only.Tools Needed: N/APackage Dimensions: 6.5” x 4.5” x 1.5” / 16.5 x 11.4 x 3.6 cmPackage Weight: 0.33 lbs / 0.15 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK FLASHING MOUNT KENYA
KSh 25,000.00Add to cart*Price includes shipping and handling fees
Designed for water-tight protection when installing Starlink on shingles or siding and provides storage for extra cable. Requires additional purchase of Pivot Mount.Tools Needed: Drill, Phillips Head Drill Bit, 5/16” (7.9 mm) and 7/16” (11.1 mm) Socket Wrenches, 7/16” (11.1 mm) Wrench, Utility Knife, Pry Bar, Roof Cement, Measuring Tape, Stud Finder, Pencil, and GogglesMount Dimensions: Length: 10.58″ / 26.89 cm, Width: 9.07″ / 23 cm, Height: 1.97″ / 5 cmPackage Dimensions: 15 5/8” x 15 ¼” x 3” / 39.7 x 38.7 x 7.6 cmPackage Weight: 7 lbs / 3.2 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK 150 FT REPLACEMENT CABLE KENYA
KSh 35,000.00Add to cart*Price includes shipping and handling fees
The 150’ cable is designed to replace the standard 50’ cable from the Starlink Kit when additional length is needed between your install location and the router.Tools Needed: N/APackage Dimensions: 12.2” x 3.5” x 12.8” / 31.1 x 8.9 x 32.3 cmPackage Weight: 6 lbs / 2.75 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
Add to cartDesigned for installation on shingled roofs, requires drilling. Not recommended for tile, slate, and clay roofing. For best results, the mount should be adjusted to ensure Starlink is installed as close to vertical as possible.Tools Needed: Drill, 1/2″ (12.7 mm) Socket Wrench, 5/32″ (4 mm) Drill BitMount Dimensions: Length: 8.66″ / 22 cm, Width: 4.3″ / 11 cm, Height: 6.14″ / 15.6 cm* INTERNATIONAL SHIPPING: ALL TAXES AND DUTIES ARE PAID BY THE BUYERPackage Dimensions:
Lenght: 5.5 in / 24.7 cm, Width: 9.7 in / 14 cm, Height: 3.1 in / 7.9 cm
Package Weight:
1 oz / 2.2 lb
-
Starlink Ethernet Adapter Mount + Starlink Router Wall Mount 2 in 1 Combo | White Bracket Only
KSh 10,000.00Add to cartProduct features:
– Durable hard plastic material- Combo pack, Router + Ethernet Adapter 2 in 1- Great for organizing Starlink setup- Comes in black and white- Easy to installCompatible with Gen 2 Starlink Ethernet Adapter and Mount*As with most 3D printed parts/pieces, there WILL be bumps, humps, dips, lines, edges, fuzzy areas, miscolored spots, streaks, etc that in no way affect the usability, strength, or performance of this product.**Plastic is NOT designed for outdoor use or to be used in extreme temperatures as warping and/or sagging could occur. Leaving out in the summer heat not recommended. Use indoors in moderate temperatures.**Screws or other components used to mount the unit are not included.***This listing DOES NOT include Starlink equipment***Package Dimensions:
Lenght: 4 in / 11.43 cm, Width: 4.5 in / 10.16 cm, Height: 8 in / 20.32 cm
Package Weight:
5 oz / 0.33 lb
Reviews
There are no reviews yet.