SHOP
Showing 15181–15240 of 15624 resultsSorted by popularity
-
Read moreSpaceUHD
DVB-S2 Satellite Combo Receiver – REC-DSD310-HD-T2/S2• Free-to-Air
• Parental Control
• USB PVR capability
• DVB subtitle support
• Ultra High Definition H.265
• Over-the-Air software upgrade
• New generation DVB multi-platformProduct code: REC-DSD310-HD-T2/S2
-
-
-
Read moreSpaun
2-Way Splitter with Remote Power Pass in all DirectionsThe VBE2P is a 2 output satellite signal splitter with Remote Power Pass in
all directions.Product code: VBE2P
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Read moreSpaun 90
degree Elbow Connector – Set of 4 (WS 90 F /4PC)Spaun 90 degree Elbow Connector – Set of 4
Product code: WS 90 F /4PC
-
Read moreSpaun
Cascadable Multiswitch (passive) ** 5-in / 12-outCascadable multiswitch for 4 SAT-IF signals and terrestrial with 12
subscriber outputs. (Can only be used in combination with a system basic unit
SBK 55xx NFx).Product code: SMK55123F
-
Read moreSpaun
Cascadable Multiswitch (passive) ** 5-in / 16-outCascadable multiswitch for 4 SAT-IF signals and terrestrial with 16
subscriber outputs. (Can only be used in combination with a system basic unit
SBK 55xx NFx).Product code: SMK55163F
-
Read moreSpaun
Cascadable Multiswitch (passive) ** 5-in / 8-outCascadable multiswitch for 4 SAT-IF signals and terrestrial with 8
subscriber outputs. (Can only be used in combination with a system basic unit
SBK 55xx NFx).Product code: SMK5583F
-
-
-
-
Read moreSpaun
Post Amplifier for Cacadable DistributionThe Spaun NVF5522SR is a post amplifier for a cascadable satellite
distribution network. Amplifier with pre-compensating slope. Synchronous
level adjuster for all SAT IF amplifiers.Product code: NVF5522SR
-
-
-
Read moreSpaun
SAT-IF Inline Amplifier 16 to 24db (SVG24LE)The Spaun SVG 24 LE SAT-IF Inline amplifier power supply is directly via a
connected satellite receiver. Ideal for compensating the attenuation of long
cable runs between LNB and amplifier because of pre-compensating slope. All
DC through paths are both 22 kHz tone and DiSEqC capable.Product code: SVG24LE
-
Read moreSpaun
SAT-IF Inline Amplifier Remote Powered (SVG10F)The Spaun SVG 10 F Sat Inline amplifier with 10dB gain is suitable for
satellite and unicable satellite systems. The Inline Amplifier is ideally
mounted directly on the LNB output or on the inputs and outputs of a
multiswitch (if present). All DC through paths are both 22 kHz tone and
DiSEqC capable.Product code: SVG10F
-
Read moreSpaun
Standalone Multiswitch – 5-in / 8-outThe Spaun SMS 5806 NF is a compact multi-switch from the Spaun Premium
class. The SMS 5806 NF has five inputs (4x SAT / 1x terr.) and 8 outputs for
satellite receivers.Product code: SMS5806NF
-
Read moreSpaun
Standalone Multiswitch ** 5-in / 12-outThe Spaun SMS 51206 NF is a compact multi-switch from the Spaun Premium
class. The SMS 51206 NF has five inputs (4x SAT / 1x terr.) And 12 outputs
for satellite receivers.Product code: SMS51206NF
-
-
-
-
-
Read moreSS2 – 2
Way Splitter 5-2400 MHzSS2 – 2 way coaxial splitter ideal for SAT-IF and MATV distribution
networks.• Frequency range 5-2400 MHz
• DC pass via diodes from all outputs
• High shielding against ingress noise like radiated by LTE mobile
• High quality die-cast housing tin (Sn) coated with solder shield bottom
plate
• Grounding clamp terminalsProduct code: SS2
-
Read moreSS2P – 2
Way Splitter DC on All Legs 5-2400MHzSS2P – 2 way coaxial splitter with DC on all legs, ideal for SAT-IF and
MATV distribution networks.• Frequency range 5-2400 MHz
• DC pass through over diodes from all
outputs
• High shielding
• Return loss Grade 3
• High quality die-cast housing tin (Sn)
coatedProduct code: SS2P
-
Read moreSS3 – 3
Way Splitter 5-2400 MHzSS3 – 3 way coaxial splitter ideal for SAT-IF and MATV distribution
networks.• Frequency range 5-2400 MHz
• DC pass via diodes from all outputs
• High shielding against ingress noise like radiated by LTE mobile
• High quality die-cast housing tin (Sn) coated with solder shield bottom
plate
• Grounding clamp terminalsProduct code: SS3
-
Read moreSS4 – 4
Way Splitter 5-2400 MHzSS4 – 4 way coaxial splitter ideal for SAT-IF and MATV distribution
networks.• Frequency range 5-2400 MHz
• DC pass via diodes from all outputs
• High shielding against ingress noise like radiated by LTE mobile
• High quality die-cast housing tin (Sn) coated with solder shield bottom
plate
• Grounding clamp terminalsProduct code: SS4
-
Read moreSS6 – 6
Way Splitter DC one Leg 5-2400MHzSS6 – 6 way coaxial splitter ideal for SAT-IF and MATV distribution
networks.• Frequency range 5-2400 MHz
• DC pass via diodes from all outputs
• High shielding against ingress noise like radiated by LTE mobile
• High quality die-cast housing tin (Sn) coated with solder shield bottom
plate
• Grounding clamp terminalsProduct code: SS6
-
Read moreSS8 – 8
Way Splitter 5-2400 MHzSS8 – 8 way coaxial splitter ideal for SAT-IF and MATV distribution
networks.• Frequency range 5-2400 MHz
• DC pass via diodes from all outputs
• High shielding against ingress noise like radiated by LTE mobile
• High quality die-cast housing tin (Sn) coated with solder shield bottom
plate
• Grounding clamp terminalsProduct code: SS8
-
Read moreST1/10 –
Tap IF 1-Way 10dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 1-Way Tap IF 10dB
• 5 – 2250MHzProduct code: ST1/10
-
Read moreST1/12 –
Tap IF 1-Way 12dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 1-Way Tap IF 12dB
• 5 – 2250MHzProduct code: ST1/12
-
Read moreST1/15 –
Tap IF 1-Way 15dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 1-Way Tap IF 15dB
• 5 – 2250MHzProduct code: ST1/15
-
Read moreST1/16 –
Tap IF 1-Way 16dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 1-Way Tap IF 16dB
• 5 – 2250MHzProduct code: ST1/16
-
Read moreST1/20 –
Tap IF 1-Way 20dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 1-Way Tap IF 20dB
• 5 – 2250MHzProduct code: ST1/20
-
Read moreST1/24 –
Tap IF 1-Way 24dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 1-Way Tap IF 24dB
• 5 – 2250MHzProduct code: ST1/24
-
Read moreST1/25 –
Tap IF 1-Way 25dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 1-Way Tap IF 25dB
• 5 – 2250MHzProduct code: ST1/25
-
Read moreST1/6 –
Tap IF 1-Way 6dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 1-Way Tap IF 6dB
• 5 – 2250MHzProduct code: ST1/6
-
Read moreST2/10 –
Tap IF 2-Way 10dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 2-Way Tap IF 10dB
• 5 – 2250MHzProduct code: ST2/10
-
Read moreST2/12 –
Tap IF 2-Way 12dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 2-Way Tap IF 12dB
• 5 – 2250MHzProduct code: ST2/12
-
Read moreST2/15 –
Tap IF 2-Way 15dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 2-Way Tap IF 15dB
• 5 – 2250MHzProduct code: ST2/15
-
Read moreST2/20 –
Tap IF 2-Way 20dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 2-Way Tap IF 20dB
• 5 – 2250MHzProduct code: ST2/20
-
Read moreST2/25 –
Tap IF 2-Way 25dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 2-Way Tap IF 25dB
• 5 – 2250MHzProduct code: ST2/25
-
Read moreST4/10 –
Tap IF 4-Way 10dB (5-2300Mhz)• Low insertion loss
• High isolation and return loss
• 4-Way Tap IF 10dB
• 5 – 2300MHzProduct code: ST4/10
-
-
Read moreST4/16 –
Tap IF 4-Way 16dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 4-Way Tap IF 16dB
• 5 – 2250MHzProduct code: ST4/16
-
Read moreST4/20 –
Tap IF 4-Way 20dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 4-Way Tap IF 20dB
• 5 – 2250MHzProduct code: ST4/20
-
Read moreST4/24 –
Tap IF 4-Way 24dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 4-Way Tap IF 24dB
• 5 – 2250MHzProduct code: ST4/24
-
Read moreST4/25 –
Tap IF 4-Way 25dB (5-2250Mhz)• Low insertion loss
• High isolation and return loss
• 4-Way Tap IF 25dB
• 5 – 2250MHzProduct code: ST4/25
