Starlink Mini now live across Kenya! | High-speed internet from Ksh1,300/mo
24/7/365 Support +254100720022
24/7/365 Support +254100720022

SHOP

  • Ubiquiti PrismStation 5AC (Radio Only)

    Prism Station AC Shielded airMAX® ac
    BaseStation with airPrism® Technology

    With a die-cast aluminum base and interchangeable antenna, the
    PrismStationTM AC, brings increased performance to your network using
    technology that isolates beam communications between your devices. Utilizing
    Ubiquiti’s advanced airMAX® ac processor, the PrismStationTM delivers
    throughput speeds up to 500+ Mbps and signal ranges up to 5+ km (3+
    miles).

    *Antenna not included

    Built to Fight Noise With Prism Active RF Filter

    The Ubiquiti R&D team designed airPrism filtering as a robust solution
    for tower co-location interference. Requiring no communication between radios
    – and functioning despite noise from other vendors’ radios (unlike GPS
    synchronization) – airPrism enables greater system capacity and overall
    throughput by further reducing out-of-band energy.

    Modular Design

    The antenna horn is interchangeable and helps with beam-shaping for
    specific deployment and environment needs. The PrismStationTM AC also gets
    maximum gain out of the smallest footprint.

    Beam Performance Perfected

    The PrismStationTM can use a variety of horn antenna sectors designed for
    increased co-location performance without sacrificing gain. Its unique beam
    performance and superb co-location characteristics allow for a higher density
    of sectors than traditional sector technology.

    PrismStationTM AC supports GPS Sync for faster, more scalable,
    carrier-class networks, with 90% higher throughout than competing
    solutions.

    Enhanced Co-Location

    Asymmetrical horn antenna options (60° and 90°) have naturally attenuated
    side lobes and extremely low back radiation, and they offer industry-leading
    front-to-back ratio and low side lobe radiation. Symmetrical horn antennas
    (30° and 45°, the default) are ideal for cluster sector installations with
    high co-location requirements.

    Improved Noise Immunity

    PrismStationTM AC blocks or spatially filters out noise, so noise immunity
    is improved. This feature is especially important in an area crowded with
    other RF signals of the same or similar frequency.

    High MAC Efficiency

    High MAC Efficiency provides ±80% PHY RATE throughput.

    Management Wi-Fi Radio

    The PrismStationTM AC integrates a separate Wi-Fi radio for fast and easy
    setup using your mobile device.

    Advanced Software

    Sporting an all-new design for improved usability, airOS® 8 is the
    revolutionary operating system for Ubiquiti® airMAX® ac products.

    Read more
  • Ubiquiti Protect All-In-One Sensor

    A battery-powered smart sensor capable of
    detecting motion, lighting, and environmental changes.
    Motion detections up to 5 m (16 ft)
    Temperature and humidity sensing
    Ambient light sensing
    Alarm sound sensing*
    Door and window state sensing
    Up to 1 year of battery life
    Connects to UniFi Bluetooth-enable access point**
    *Based on UL217 and UL2034 alarm patterns.
    **Must be connected to an up-to-date Bluetooth-supported UniFi Access
    Point.

       

    Read more
  • Ubiquiti Protect Flood Light

    Powerful, UniFi Protect-ready LED
    floodlight with a long-distance motion sensor.

    Smart managed floodlight with integrated motion detection and light sensor.
    Housed in a compact, sleek design for low profile mounting. Easily setup and
    configure the UP-FloodLight with the UniFi Protect application.

    Features:

    Integrated motion and light sensors for floodlight control and
    management
    Detects motion at up to 5 meters
    Provides 550 Lumens of intense LED light
    PoE input
    Durable IPX5 waterproof housing
    Easy setup and configuration with the UniFi Protect Mobile App
    Included wall mount, angle mount, and screw kit

    Read more
  • Ubiquiti Rocket 5 AC Lite

    Ubiquiti Rocket 5 AC Lite

    airMAX® AC BaseStation

    The Rocket™ AC features airMAX®AC technology for maximum performance in
    wireless links. Ubiquiti Networks has designed the first airMAX® ac radios
    with high performance and ease of installation in mind.

    Performance Breakthrough

    airMAX® AC products offer improved latency, noise immunity, scalability and
    significantly increased throughput performance.

    Superior Processing

    Ubiquiti’s airMAX® engine with custom IC dramatically improves TDMA latency
    and network scalability. The custom silicon provides hardware acceleration
    capabilities to the airMAX scheduler, to support the high data rates and
    dense modulation used in airMAX AC technology.

    Advanced airOS Firmware

    airOS® 7 is the next generation of Ubiquiti’s intuitive and versatile
    firmware technology. airOS 7 now features dynamic configuration changes with
    enhanced device configuration (such as instant input validation), HTML5
    technology, a persistent user interface, and optimization for mobile
    devices.

    AirMAX Technology

    Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access
    (TDMA) airMAX protocol allows each client to send and receive data using
    pre-designated time slots scheduled by an intelligent AP controller. This
    “time slot” method eliminates hidden node collisions and maximizes airtime
    efficiency. It provides significant performance improvements in latency,
    throughput, and scalability compared to all other outdoor systems in its
    class.

    Read more
  • Ubiquiti Rocket 5 AC PRISM (GEN2)

    Ubiquiti Rocket 5 AC PRISM
    (GEN2)

    The Rocket® Prism 5AC covers the full 5 GHz radio band and incorporates
    both airMAX ac and airPrism technologies for maximum performance of wireless
    links in high-density areas.

    Management Wi-Fi Radio

    The Rocket® Prism AC integrates a separate Wi-Fi radio for fast and easy
    setup using your mobile device.

    Improved Surge Protection

    The Rocket® Prism AC features enhanced protection against ESD events.

    GPS Synchronization

    The Rocket® Prism AC supports GPS Sync for faster, more scalable,
    carrier-class networks, with 90% higher throughout than competing
    solutions.

    Revolutionary Filtering Technology

    Ubiquiti’s patented airPrism technology provides breakthrough radio
    selectivity in unlicensed wireless band performance. airPrism technology
    isolates signals within the operating channel to increase capacity and
    throughput in co-location deployments.

    Designed for High Performance

    The Rocket® Prism 5AC features EMI-shielded metal housing, GPS, airPrism
    circuitry, and the airView® real-time spectrum analyzer to deliver maximum
    spectral efficiency/throughput.

    Now with airOS 8

    airOS 8 provides powerful features, including airMAX® ac protocol support,
    real-time RF analytics, and an all-new design for enhanced usability.

    Read more
  • Ubiquiti RocketDish Airmax 5 GHz 34 dBi
  Dish Antenna

    Breakthrough Design and Performance

    The powerful airMAX® RocketDish™ Antennas feature carrier-class
    construction and 2×2, dual-polarity performance.

    Industrial-Strength Construction

    airMAX® Antennas are designed with robust mechanical design for outdoor
    application use.

    Plug and Play Integration

    Every airMAX® Antenna has a built-in Rocket™ mount, so no tools are needed
    to install the Rocket BaseStation.

    Read more
  • Ubiquiti Single Mode (LC) SFP Module Pair

    Ubiquiti Single Mode (LC) SFP Module
    Pair

    The UF-SM1G is ideal for long-distance, outdoor, bi-directional,
    single-mode fiber runs for distances of up to 3 km at 1 Gbps.

    Outdoor Fiber Installations

    For long-distance runs of 300+ meters, use UFiber 1G single-mode modules
    for maximum reuse of existing infrastructure.

    UF-SM-1G-S

    Supported Media Single-Mode Fiber
    Connector Type (1) LC
    BiDi ✓
    TX Wavelength
    Blue
    1310 nm
    Yellow
    1550 nm

    RX Wavelength
    Blue
    1550 nm
    Yellow
    1310 nm

    Data Rate 1.25 Gbps SFP
    Cable Distance 3 km
    Pack Options 1-Pair

    Please note: This kit is only sold as a pair (one box with 2 units inside)

    Read more
  • Ubiquiti Standard 48 Switch

    48-port, Layer 2 switch with a silent,
    fanless cooling system.
    Features:
    (48) GbE ports
    (4) 1G SFP ports
    Fanless, silent cooling

    Read more
  • Ubiquiti Switch Aggregation

    Layer 2 switch with (8) 10G SFP+
    ports.

    The Switch Aggregation is a fully managed, Layer 2 switch with (8) 10G SFP+
    ports designed to enhance your network’s switching capacity and performance
    by creating high-bandwidth aggregation links. This rack-mountable switch also
    offers 160 Gbps switching capacity and features a 1.3″ LCM color
    touchscreen that concisely displays key system and connection insights.

    Additionally, with its 4.7″ depth, it’s easy to mount this compact,
    fanless switch in a SOHO rack cabinet. This switch can be monitored or
    configured from anywhere with the powerful, intuitive UniFi Network web
    application and mobile app.

    Features:

    (1) 1.3″ LCM color touchscreen with AR switch management

    (8) 10G SFP+ ports

    160 Gbps switching capacity

    Fanless, near-silent cooling

    Read more
  • Ubiquiti Switch Enterprise 24 PoE

    Layer 3, PoE switch with (12) 2.5GbE,
    802.3at PoE+ RJ45 ports, (12) GbE, 802.3at PoE+ RJ45 ports, and (2) 10G SFP+
    ports.

    The Switch Enterprise 24 PoE (USW Enterprise 24 PoE) is a fully managed,
    Layer 3 switch with (12) 2.5GbE, 802.3at PoE+ RJ45 ports, (12) GbE, 802.3at
    PoE+ RJ45 ports, (2) 10G SFP+ ports, and a 400W total PoE supply. The USW
    Enterprise 24 PoE also features a 1.3″ LCM color touchscreen that
    concisely displays key system and connection insights.

    Additionally, the USW Enterprise 24 PoE offers enhanced power supply
    failure protection when connected to the SmartPower Redundant Power System
    (USP RPS sold separately). This switch can be monitored or configured from
    anywhere with the powerful, intuitive UniFi Network web application and
    mobile app.

    Features:

    (1) 1.3″ LCM color touchscreen with AR switch management

    (12) GbE, 802.3at PoE+ RJ45 ports

    (12) 2.5GbE, 802.3at PoE+ RJ45 ports

    (2) 10G SFP+ ports

    (1) USP RPS DC input

    400W total PoE supply

    Layer 3 switching features

    Single-row RJ45 port layout for easy patch panel cable management

    Read more
  • Ubiquiti Switch Enterprise 48 PoE

    Layer 3, PoE switch with (48) 2.5GbE,
    802.3at PoE+ RJ45 ports and (4) 10G SFP+ ports.

    The Switch Enterprise 48 PoE (USW Enterprise 48 PoE) is a fully managed
    switch with (48) 2.5GbE, 802.3at PoE+ RJ45 ports, (4) 10G SFP+ ports, and a
    720W total PoE supply. Along with its Layer 3 functionality, this switch
    offers an extensive suite of Layer 2 switching protocols, including
    port-specific operation modes (switching, mirroring, or aggregate).The USW
    Enterprise 48 PoE also features a 1.3″ LCM color touchscreen that
    concisely displays key system and connection insights.

    Additionally, the USW Enterprise 48 PoE offers enhanced power supply
    failure protection when connected to the SmartPower Redundant Power System
    (USP RPS sold separately). This switch can be monitored or configured from
    anywhere with the powerful, intuitive UniFi Network web application and
    mobile app.

    Features:

    (1) 1.3″ LCM color touchscreen with AR switch management
    (48) 2.5GbE, 802.3at PoE+ RJ45 ports
    (4) 10G SFP+ ports
    (1) USP RPS DC input
    720W total PoE supply
    Layer 3 switching features

    Managed with the UniFi Network application: Version 6.2.26 and later

    Read more
  • Ubiquiti Switch Enterprise 8 PoE

    Layer 3, PoE switch with (8) 2.5GbE,
    802.3at PoE+ RJ45 ports and (2) 10G SFP+ ports.

    The Switch Enterprise 8 PoE (USW Enterprise 8 PoE) is a fully managed,
    Layer 3 switch with (8) 2.5GbE, 802.3at PoE+ RJ45 ports and (2) 10G SFP+
    ports.The USW Enterprise 8 PoE also features a 1.3″ LCM color
    touchscreen that concisely displays key system and connection insights. This
    switch can be monitored or configured from anywhere with the powerful,
    intuitive UniFi Network web application and mobile app.

    Features:

    (1) 1.3″ LCM color touchscreen with AR switch management

    (8) 2.5GbE, 802.3at PoE+ RJ45 ports

    (2) 10G SFP+ ports

    120W total PoE supply

    Wall-mountable (kit included)

    Managed with the UniFi Network application: Version 6.3.51 and later

    Read more
  • Ubiquiti Switch Flex Utility

    The Switch Flex Utility is an outdoor
    weatherproof enclosure designed for use with the Switch Flex.

    It includes an Ethernet patch cable and a 60W PoE adapter, which provides a
    maximum PoE budget of 46W. The USW Flex Utility can be easily mounted on a
    pole, provides clean cable management and screw lock for security.

    Note: UniFi Switch Flex, USW-Flex, sold separately

    Read more
  • Ubiquiti Switch Flex XG

    Layer 2 switch with (4) 10GbE RJ45 ports
    and (1) GbE, 802.3at PoE+ RJ45 input.

    The Switch Flex XG (USW Flex XG) is a fully managed, mult-gigabit, Layer 2
    switch with (4) 10GbE RJ45 ports and (1) GbE PoE input. The USW Flex XG
    sports slim, compact housing and can be mounted on a desktop*. This switch
    can also be monitored or configured from anywhere with the powerful,
    intuitive UniFi Network web application and mobile app.

    Features:

    (1) GbE, 802.3at PoE+ RJ45 input
    (4) 10GbE RJ45 ports
    Compact, slim housing
    Can be powered with a 5V, 5A USB-C adapter**

    Read more
  • Ubiquiti Switch Pro 48

    Layer 3 switch with (48) GbE RJ45 ports
    and (4) 10G SFP+ ports.

    The Switch Pro 48 (USW Pro 48) is a fully managed switch with (48) GbE RJ45
    ports and (4) 10G SFP+ ports. The USW Pro 48 combines a rich set of Layer 2
    features with advanced Layer 3 tools including inter-VLAN routing, static
    routing, and a DHCP server. The USW Pro 48 is an ideal aggregation and access
    layer switch for any UniFi system. It combines innovative, near-silent
    cooling capability with SmartPower RPS (USP RPS) power redundancy. The switch
    can also be monitored and configured from anywhere with the powerful,
    intuitive UniFi Network web application and mobile app.

    Features:

    (1) 1.3″ LCM color touchscreen with AR switch management
    (48) GbE RJ45 ports
    (4) 10G SFP+ ports
    (1) USP RPS DC input
    Near-silent cooling
    Layer 3 switching features

    Managed with the UniFi Network application: Version 5.12.11 and later

    Read more
  • Ubiquiti Switch Pro Aggregation

    Layer 3 switch with (28) 10G SFP+ ports
    and (4) 25G SFP28 ports.

    The Switch Pro Aggregation is a fully managed, Layer 3 switch with (28) 10G
    SFP+ ports and (4) 25G SFP28 ports designed to enhance your network’s
    switching capacity and performance by creating high-bandwidth aggregation
    links. This rack-mountable switch also offers 760 Gbps switching capacity and
    features a 1.3″ LCM color touchscreen that concisely displays key system
    and connection insights.

    Additionally, the Switch Pro Aggregation offers enhanced power supply
    failure protection when connected to the SmartPower Redundant Power System
    (USP RPS sold separately). This switch can be monitored or configured from
    anywhere with the powerful, intuitive UniFi Network web application and
    mobile app.

    Features:

    (1) 1.3” LCM color touchscreen with AR switch management
    (28) 10G SFP+ ports
    (4) 25G SFP28 ports
    (1) USP RPS DC input
    760 Gbps switching capacity
    Layer 3 switching features

    Managed with the UniFi Network application: Version 6.1.25 and later

    Read more
  • Ubiquiti U Fiber AE Fiber-to-Ethernet
  Converter

    Fiber-to-Ethernet Converter

    UFiber Active Ethernet allows for easy media conversion from fiber to
    copper. It supports 1 Gbps fiber uplink speeds and 10/100/1000 Ethernet
    speeds. UFiber Active Ethernet can be powered with 24V Passive PoE or 802.3af
    and is compatible with all UFiber SFP Modules (power supply and SFP modules
    not included).

    The Convenience of Fiber

    UFiber Active Ethernet provides fiber connectivity to an RJ45 Ethernet
    device, which in turn provides 802.3af or 24V passive PoE to UFiber AE.

    Read more
  • Ubiquiti UFiber Instant Optical
  Transceiver

    Ubiquiti UFiber Instant Optical
    Transceiver

    The UFiber Instant is a high‑performance GPON CPE in the form factor of an
    SFP module. It features an SGMII Ethernet LAN port and is powered by
    SFP.

    For information on compatible Ubiquiti devices, visit:
    ubnt.link/Using-UF-Instant

    Features:

    High-Performance GPON CPE
    Up to 2.4 Gbps Downstream and 1.2 Gbps Upstream GPON structure
    Supports up to 20 km GPON Links
    Powerful Layer 2/3 Management Features
    (1) GPON WAN Port, SC/APC
    (1) 1Gbps SFP interface

    Read more
  • Ubiquiti UFiber Loco GPON CPE

    Ubiquiti UFiber Loco GPON CPE

    Status Display

    The easy-to-read LEDs provide status information: Ethernet connection,
    signal strength, and power.

    Power over Ethernet

    The UFiber loco can be powered by a Micro-USB Power Adapter (included) or
    24V passive PoE.

    Designed for Integration

    Up to 128 UFiber loco devices can be connected to a single GPON port.
    Supporting GPON links of up to 20 km, the UFiber loco integrates with the
    UFiber OLT, UFiber OLT 4 and third-party OLT devices.

    Display LED Indicators
    PoE Input 24V passive PoE or Micro-USB Power Adapter
    Networking Interface GPON (SC/APC), Ethernet (RJ45)
    Operation Mode Bridge or Router (router mode is supported in firmware
    version 2.0 and higher)
    Supported OLTs UFiber OLT, UFiber OLT 4, 
    list of supported third-party OLTs

    Read more
  • Ubiquiti UFiber OLT 4

    Ubiquiti UFiber OLT 4
    4-Port Optical Line Terminal

    Configuring a fiber network just became as easy as setting up a smartphone.
    Say goodbye to command lines, manuals, and paid support licenses. Introducing
    the UFiber OLT 4 – a fiber solution that anyone can deploy.

    Client and Uplink Connectivity

    The OLT features four PON ports to connect up to 512 ONUs, and SFP+ port
    deliver up to 10 Gbps of uplink connectivity.

    Rackmount Design

    The 1U-high metal chassis allows for convenient mounting in a
    standard-sized, 19″‑wide rack.

    Centralized Management

    Easily configure the OLT and manage multiple sites using the comprehensive
    UNMS™ (Ubiquiti® Network Management System) software.

    UFiber GPON Network Topology Example:

    Read more
  • Ubiquiti UFiber Outdoor Terminal Box

    Weatherproof, pole-mountable enclosure
    designed to protect outdoor UFiber devices.

    The UFiber Outdoor Terminal Box protects your UFiber devices against harsh
    weather damage so they can remain operational in all conditions. This
    heavy-duty enclosure sports a screw-lock design and comes with a
    pole-mounting kit so you can stage it wherever you need IPX5-rated device
    protection within your UFiber deployment.

    Features:

    IPX5-rated, weatherproof housing
    Included cable strap, metal strap, and screw kit
    Included pole mounting kit

    Read more
  • Ubiquiti UFiber WiFi - GPON CPE and
  Router

    Sporting a sleek industrial design, the U Fiber WiFi is a robust,
    high‑performance GPON CPE that features an informational LED display with 4
    Ethernet ports and WiFi.

    Status LEDs

    The easy-to-read LEDs provide status information: Ethernet connection,
    signal strength, and power.

    Versatile Power

    The 4 Ethernet LAN ports support 10/100/1000 Mbps connections. The UFiber
    WiFi can be powered using 24V passive PoE on Port 1, or by 24VDC.

    Designed for Integration

    Up to 128 UFiber WiFi devices can be connected to a single GPON port.
    Supporting GPON links of up to 20 km, the UFiber WiFi integrates with the
    UFiber OLT and third-party OLT devices.

    Read more
  • Ubiquiti UISP airMAX LiteBeam 5AC XR

    UISP airMAX LiteBeam 5AC XR

    Ultra-lightweight, outdoor, wireless station designed to create extremely
    long-distance links.

    The airMAX® LiteBeam® AC 5 GHz XR (LBE 5AC XR) is an outdoor, wireless
    station designed to establish high-speed connections over extremely long
    distances, allowing you to serve more subscribers with just a single device.
    The LBE 5AC XR also features a proprietary, high-gain antenna capable of
    delivering 450+ Mbps throughput over the 5 GHz frequency range.

    Features:

    Proprietary airMAX ac chipset
    Ultra-lightweight aluminum alloy and UV-stabilized polycarbonate
    High-gain antenna with InnerFeed® technology
    Establishes high-speed, extremely-long-distance links
    Integrated GPS
    Link planning support via ISP Design Center
    Dedicated management radio for quick device setup via the UISP® Mobile
    app

    Managed with the UISP application: iOS 2.19.2, Android 2.20.2, and higher

    Read more
  • Ubiquiti UISP Console

    Ubiquiti UISP Console

    Features:

    (9) GbE RJ45 ports
    (2) 10G SFP+ ports
    Up to 8,500 Mbps NAT throughput*
    Powered by an external AC/DC adapter (included)
    Additional Power TransPort input for DC redundancy
    1U rack or wall-mountable (kits included)
    *Up to 2,250 Mbps with QoS enabled; up to 7,500 Mbps with IP Accounting
    enabled.

    Read more
  • Ubiquiti UISP Dish

    UISP Dish

    Features:

    Frequency range: 5.15 – 6.875 GHz
    30+ km PtP link range
    Precision mounting bracket for easy installation and alignment
    Compatible with AF 5XHD and RP 5AC

    Read more
  • Ubiquiti UISP Horn

    High-isolation, point-to-multipoint
    (PtMP) horn antenna that covers a wide operating frequency range (5.15 –
    6.875 GHz).

    The UISP® Horn is an efficient PtMP antenna that provides high isolation
    within congested environments by utilizing its wide operating frequency
    range. With the included WaveGuide adapter, this antenna can be easily
    attached to an airFiber® 5XHD Radio (AF 5XHD), LTU® Rocket® , or airMAX®
    Rocket Prism® AC 5 GHz Radio (RP 5AC) to amplify their signal. The UISP Horn
    also has a latch on each side for secure, snap-in radio connection. Operation
    frequency may vary based on regional radio frequencies and
    regulations. 

    Features:

    High-isolation 30° horn antenna that covers a wide operating frequency
    range (5.15 – 6.875 GHz)
    Low backlobes for device co-location
    15+ km PtMP link range
    Die-cast, UV-stabilized polycarbonate enclosure for enhanced durability and
    weatherproofing
    Pole-mountable antenna with a metal carrying handle
    Two side latches for secure, snap-in radio connection

    Notes: Compatible with the AF 5XHD, RP 5AC, and LTU Rocket.

    Operation frequency may vary based on regional radio frequencies and
    regulations.

    Read more
  • Ubiquiti UISP LTU XR - Long-range, 29 dBi
  antenna

    5 GHz LTU® client that establishes
    extremely long-distance wireless links with an LTU Rocket serving as its base
    station.

    The LTU XR is a high-performance, cost-effective PtMP CPE for wireless ISPs
    that can reach up to a 550 Mbps throughput rate. The LTU XR also facilitates
    independent transmission and receives channel frequency configurations
    anywhere within its radio band to avoid local interference and ensure
    superior client performance. Additionally, the LTU XR is equipped with a Bluetooth
    management radio so it’s easy to set up and configure with the UISP® Mobile
    app.

    Features:

    Proprietary Ubiquiti LTU core processor
    Long-range, 29 dBi antenna with InnerFeed® technology
    High data and performance rate (1024 QAM)
    Link range up to 35 km
    Channel width flexibility (10/20/30/40/50 MHz bandwidth)
    Central configuration management from the AP side
    Frequency splitting
    Router mode support
    Integrated GPS
    Link planning support via ISP Design Center
    Quick, Bluetooth-powered setup with the UISP Mobile app

    Read more
  • Ubiquiti UISP Router

    Eight-port, Gigabit PoE router designed
    for MicroPoP applications and supporting secure, large-scale networks.

    Features:

    Interface: (8) GbE RJ45 ports with 27V passive PoE output / (1) 1G SFP
    port
    110W (27V) total PoE availability*, 15W/port (2-pair) / 30W/port
    (4-pair)
    Up to 1 Gbps NAT throughput**
    Traffic shaping functionality and automated customer suspension
    Firewall and OSPF routing

    Managed with the UISP application: Version 1.4.0 and later

    *When powered with the included AC/DC adapter.

    **Up to 500 Mbps with Netflow enabled; up to 400 Mbps with Traffic Shaping
    enabled.

    Can be staged outdoors when enclosed in the UISP Box (sold separately).

    Read more
  • Ubiquiti UISP Switch

    UISP Switch

    Features:

    (8) GbE RJ45 ports with 27V passive PoE output
    (1) SFP port
    110W (27V) total PoE availability*, 15W/port (2-pair) / 30W/port
    (4-pair)
    Port isolation, speed limiting, and DHCP snooping functionality
    Easy Bluetooth setup with the UISP Mobile app

    *When powered with the included AC/DC adapter.

    Can be staged outdoors when enclosed in the UISP Box (sold
    separately).

    Read more
  • Ubiquiti UISP Switch Professional

    Ubiquiti UISP Switch Professional

    220W (27V) PoE switch with (24) GbE RJ45 ports, including (16) with 27V
    passive PoE, and (4) 10G SFP+ ports.

    (24) GbE RJ45 ports, including (16) with 27V passive PoE output
    (4) SFP+ ports
    220W (27V) total PoE availability, 15W/port (2-pair) / 30W/port
    (4-pair)
    Port isolation, speed limiting, and DHCP snooping functionality
    1.3″ LCM color touchscreen
    Additional Power TransPort input for DC redundancy

    Read more
  • Ubiquiti UISP Wave Access Point

    60 GHz PtMP access point powered by Wave
    Technology.

    The Wave Access Point can connect up to 15 stations and deliver up to 5.4
    Gbps total throughput (2.7 Gbps duplex). It is equipped with a
    high-performance 5 GHz backup radio to ensure uninterrupted connection, as
    well as a Bluetooth radio to simplify setup in the UISP® Mobile app.

    Features:

    5 GHz backup radio
    Supported stations and distances:
    –  Wave Long-Range: up to 8 km
    –  Wave Nano: up to 5 km
    WAN Ports: (1) 10G SFP+, (1) 2.5GbE
    Integrated GPS antenna
    Link planning support via the ISP Design Center

    Read more
  • Ubiquiti UISP Wave Long-Range

    60 GHz PtMP station powered by Wave
    Technology.

    Can connect to a Wave AP and deliver 2 Gbps total throughput (1 Gbps
    duplex). The Wave Long-Range is equipped with a high-performance 5GHz backup
    radio to ensure uninterrupted connection and a Bluetooth radio to simplify
    setup via the UISP® Mobile app.

    Features:

    5 GHz backup radio
    Link range: up to 8 km
    Router mode support
    Integrated GPS antenna
    Link planning support via ISP Design Center
    Managed with UISP application: Version 1.4.5 and later

    Read more
  • Ubiquiti UISP Wave Nano

    60 GHz PtMP station powered by Wave Technology.

    The Wave Nano can connect to a Ubiquiti Wave AP and deliver 2 Gbps total
    throughput (1 Gbps duplex). The Wave Nano is equipped with a high-performance
    5GHz backup radio to ensure uninterrupted connection and a Bluetooth radio to
    simplify setup via the UISP® Mobile app.

    Compatibility and supported distances:

    — Wave AP – 5 km link range

    — Wave AP Micro – 4 km link range

    Features:

    2 Gbps max. throughput (1 Gbps duplex)
    5 GHz 800+ Mbps weather-resilient backup radio
    (1) GbE RJ45 port
    Integrated GPS & Bluetooth
    Link planning support via ISP Design Center
    Managed with UISP application: Version 1.4.5 and later

    Read more
  • Ubiquiti UniFi6 Pro Access Point

    Wi-Fi 6 Access Point with dual-band 2×2
    MIMO in a compact design for low-profile mounting.

    UniFi 6 Lite is a 2×2 Wi-Fi 6 access point that delivers up to 1.5 Gbps
    aggregate radio rate with 5 GHz (MU-MIMO and OFDMA) and 2.4 GHz (MIMO) radios.
    Mount UniFi 6 Lite horizontally in the ceiling to cover a high-density
    environment, or mount it vertically on the wall to extend its range. UniFi 6
    Lite has a compact and nano-sized design, so it can use nanoHD covers and
    mounting accessories.

    Features:

    2×2 high-efficiency Wi-Fi 6
    5 GHz band 2×2 MU-MIMO and OFDMA with radio rate of 1.2 Gbps
    2.4 GHz band 2×2 MIMO with radio rate of 300 Mbps
    Gigabit Ethernet, powered with 802.3af PoE (PoE injector not
    included)
    Compatible with UAP-nanoHD covers and recessed mounting bracket

    Managed by UniFi Network Controller version: 5.14.3 or higher

    Integrate the U6-Lite with your UniFi Network Controller in minutes, and:

    Manage your networks from a single interface.
    Enjoy intuitive configuration options, as well as robust device control and
    monitoring.
    Upgrade device firmware remotely.
    Easily manage network users and guests.
    Personalize the design, architecture, and privacy of guest hotspots.

    Less interference with OFDMA

    With OFDMA, Wi-Fi 6 access points not only deliver higher-volume data
    packets, but tactically parse and deliver data to multiple devices
    simultaneously, drastically improving their upload and download speeds.

    Two-stream, high-efficiency Wi-Fi 6 technology

    Wi-Fi 6 APs deliver an aggregate radio rate of up to 1.5 Gbps with 5 GHz
    (2×2 MU-MIMO and OFDMA) and 2.4 GHz 2×2 MIMO radios.

    Powerful, wider wireless coverage

    The U6-Lite access point utilizes Wi-Fi 6 technology to provide strong and
    expansive wireless coverage to all enterprise networking environments.

    Simultaneously connect to more devices

    Create and support over 300 distinct client connections.

    Easily set up and grow your network

    The U6-Lite access point seamlessly integrates with the UniFi Network
    Controller and simplifies network bridging.

    *PLEASE TAKE NOTE
    This model does not include any power supply/PoE injector.
    The U6-LITE can be powered either via 802.3af or 48V Passive PoE.
    Compatible PoE Injector can be found
    here: https://shop.dbg.co.za/ub-poe-48g-15w.html
    802.3af PoE switches can be found
    here: https://shop.dbg.co.za/Power/PoE-Switches/

    Read more
  • Ubiquiti UniFi6 Pro Access Point

    Access Point WiFi 6 Long-Range
    U6-LR is a high-performance Access Point leveraging advanced WiFi 6
    technology to provide powerful wireless coverage to enterprise
    environments.
    It delivers an aggregate radio rate of up to 3.0 Gbps with 5 GHz (4×4
    MU-MIMO and OFDMA) and 2.4 GHz 4×4 MIMO radios. The U6-LR seamlessly blends
    into any environment, and is capable of being mounted in indoor and
    semi-outdoor environments (IP54 rated).
    Features:

    1.3 GHz dual-core processor (now upgraded to support full-duplex 1 Gbps
    TCP/IP performance)
    Four-stream high-efficiency Wi-Fi 6 technology
    5 GHz band 4×4 MU-MIMO and OFDMA with radio rate of 2.4 Gbps
    2.4 GHz band 4×4 MIMO with radio rate of 600 Mbps
    Powered with 802.3at PoE (PoE injector not included)

    Managed with UniFi Network Application Version: 6.0.34 or higher

    Best-in-class Wi-Fi coverage and performance

    With its Wi-Fi 6 capability, the U6-LR will strengthen your enterprise
    environment with the widest, most reliable coverage yet.

    Wi-Fi 6
    Better performance in crowded environments

    4-Stream AP
    Faster download and upload speeds

    Full-duplex 1 Gbps
    Support full-duplex 1 Gbps TCP/IP performance

    Bluetooth 5.0
    Fast discovery and setup

    Four-stream high-efficiency Wi-Fi 6 technology

    Wi-Fi 6 APs deliver an aggregate radio rate of up to 3 Gbps with 5 GHz (4×4
    MU-MIMO and OFDMA) and 2.4 GHz 4×4 MIMO radios

    124% speed increase

    Powerful, wider wireless coverage

    The U6-LR access point utilizes Wi-Fi 6 technology to provide strong and
    expansive wireless coverage to all enterprise networking environments.

    Simultaneously connect to more devices

    Create and support over 300 distinct client connections.

    Easily set up and grow your network

    The U6-LR access point seamlessly integrates with the UniFi Network
    Application and simplifies network bridging.

    *PLEASE TAKE NOTE

    This model does not include any power supply/PoE injector.
    The U6-LR can be powered via 802.3at PoE (requires 16.5W).
    Compatible PoE Injector can be found
    here: https://shop.dbg.co.za/ub-poe-48g-30w.html
    802.3af/at PoE switches can be found
    here: https://shop.dbg.co.za/Power/PoE-Switches/

    Read more
  • Ubiquiti UniFi AC HD

    Ubiquiti UniFi AC HD
    802.11ac Wave 2 Enterprise Wi-Fi Access Point

    Multi‑User MIMO
     Technology

    4×4 Dual‑Radio 
    2.53Gbps Performance

    500+ Client 
    Connections

    High‑Density Applications Powered by MU‑MIMO Technology

    802.11ac Wave 2 MU‑MIMO (Multi‑User, Multiple Input, Multiple Output)
    technology allows a Wave 2 AP to communicate with multiple clients at the
    same time – significantly increasing multi‑user throughput and overall user
    experience.

    Radio Hardware Acceleration

    Independent 2.4 GHz and 5 GHz dedicated hardware offload for maximized
    multi‑user throughput and reduced latency

    CPU Hardware Acceleration

    Dedicated hardware offload for QoS, Guest Control, and Client
    Management

    Optimized for MU‑MIMO

    Antenna System Optimized for 802.11ac Wave 2 MU-MIMO Beamforming

    Beamforming

    Data is sent and received using multiple antennas to increase throughput
    and range.

    Advanced Features in UniFi Controller

    UniFi is the premiere Software Defined Networking (SDN) solution with
    seamless integration of high‑performance switching, gateways, and more.

    Read more
  • Ubiquiti UniFi AC In-Wall AP

    In-Wall 802.11ac Wi-Fi Access Point

    Easier Than You Think

    Ideal for new and retrofit installations, the UniFi® AC In-Wall is
    designed
    to convert an Ethernet wall jack into a dual-band 802.11ac Wi-Fi access
    point
    with two Gigabit Ethernet ports.

    The Power of PoE

    Versatile Data and PoE Output

    An Ethernet wall jack becomes an access point, a gigabit switch, and a PoE
    power source.

    Wire a workstation and power a VoIP phone. Or power a US-8 for even more
    Ethernet ports.

    Simple and Scalable Device Management

    The UniFi® Controller provides a graphical user interface for easy
    configuration and monitoring of the UniFi Switch and other UniFi
    devices.

    Read more
  • Ubiquiti UniFi AC Long Range

    Ubiquiti UniFi AC Lite Access Point

    The UniFi AC Lite AP features the latest Wi-Fi 802.11ac technology in a
    refined industrial design and is ideal for cost-effective deployment of
    high‑performance wireless networks.

    Dual-Radio Performance, Gigabit Speeds

    The UniFi AC Lite AP delivers 5x the performance of the first-generation
    UniFi AP while still maintaining Ubiquiti’s disruptive pricing strategy.

    Sleek, Ultra-Compact Design

    The UniFi AC Lite AP features a cleaner design in a reduced footprint –
    half the size compared to the standard UniFi AP.

    Designed for Optimal RF Performance

    The newly redesigned UniFi Controller optimizes RF performance:

    Scalable Enterprise Wi-Fi Management

    The UniFi Controller v4 software is a powerful, enterprise wireless
    software engine ideal for high-density client deployments requiring low
    latency and high uptime performance. With its software-based capabilities,
    the UniFi virtual control plane allows for unlimited scalability under one
    centralized controller. Remotely access the UniFi Controller to upgrade
    deployed UniFi APs while in the field.

    Read more
  • Ubiquiti UniFi AC Long Range (5Pack)

    Ubiquiti UniFi AC Lite Access Point (5
    Pack)

    The UniFi AC Lite AP features the latest Wi-Fi 802.11ac technology in a
    refined industrial design and is ideal for cost-effective deployment of
    high‑performance wireless networks.

    Dual-Radio Performance, Gigabit Speeds

    The UniFi AC Lite AP delivers 5x the performance of the first-generation
    UniFi AP while still maintaining Ubiquiti’s disruptive pricing strategy.

    Sleek, Ultra-Compact Design

    The UniFi AC Lite AP features a cleaner design in a reduced footprint –
    half the size compared to the standard UniFi AP.

    Designed for Optimal RF Performance

    The newly redesigned UniFi Controller optimizes RF performance:

    Scalable Enterprise Wi-Fi Management

    The UniFi Controller v4 software is a powerful, enterprise wireless
    software engine ideal for high-density client deployments requiring low
    latency and high uptime performance. With its software-based capabilities,
    the UniFi virtual control plane allows for unlimited scalability under one
    centralized controller. Remotely access the UniFi Controller to upgrade
    deployed UniFi APs while in the field.

    *Please take note that the UniFi 5Packs do not include any PoE
    injectors. 
    The UniFi AC models can be powered by 24V passive PoE injectors (available
    separately) or from a Ubiquiti ToughSwitch.

    Read more
  • Ubiquiti UniFi AC Long Range

    Ubiquiti UniFi AC Long Range

     

    Innovative Antenna Design

    The innovative antenna design provides a long-range, symmetrical-link
    coverage area, and the antenna gain of the UniFi AC LR AP performs better than
    one-way, high transmit power does for connecting distant clients.

     

     

    Designed for Optimal RF Performance

    The newly redesigned UniFi Controller optimizes RF performance:

     

    Scalable Enterprise Wi-Fi Management

    The UniFi Controller v4 software is a powerful, enterprise wireless
    software engine ideal for high-density client deployments requiring low
    latency and high uptime performance. With its software-based capabilities,
    the UniFi virtual control plane allows for unlimited scalability under one
    centralized controller. Remotely access the UniFi Controller to upgrade
    deployed UniFi APs while in the field.

    Read more
  • Ubiquiti UniFi AC Long Range (5Pack)

    Ubiquiti UniFi AC Long Range (5
    Pack)

    Innovative Antenna Design

    The innovative antenna design provides a long-range, symmetrical-link
    coverage area, and the antenna gain of the UniFi AC LR AP performs better
    than one-way, high transmit power does for connecting distant clients.

     

    Designed for Optimal RF Performance

    The newly redesigned UniFi Controller optimizes RF performance:

    Scalable Enterprise Wi-Fi Management

    The UniFi Controller v4 software is a powerful, enterprise wireless
    software engine ideal for high-density client deployments requiring low
    latency and high uptime performance. With its software-based capabilities,
    the UniFi virtual control plane allows for unlimited scalability under one
    centralized controller. Remotely access the UniFi Controller to upgrade
    deployed UniFi APs while in the field.

    *Please take note that the UniFi 5Packs do not include any PoE
    injectors. 

    The UniFi AC models can be powered by 24V passive PoE
    injectors (available separately) or from a Ubiquiti ToughSwitch.

    Read more
  • Ubiquiti UniFi AC Mesh

    802.11AC Indoor/Outdoor Wi-Fi Access Point
    with Plug & Play Mesh Technology

    Breakthrough Wi-Fi Mesh Technology

    Expand the limits of wide-area Wi-Fi. UniFi® Mesh technology simplifies
    Wi‑Fi infrastructure deployments by enabling nearly unlimited application use
    including towns, stadiums, conference halls, and concert venues.

    Outdoor Connectorized AP

    The compact UniFi AC Mesh AP is a dual-band 802.11AC 2×2 MIMO Wi-Fi Access
    Point with adjustable dual-band omni antennas.

    Antenna Versatility

    The UniFi AC Mesh AP easily integrates with a variety of our airMAX® sector
    and omni antennas for expanded range coverage and customized pattern shaping,
    providing the flexibility needed for optimal stadium and concert venue
    deployments.

    UniFied IT Management

    UniFi creates a highly scalable, end-to-end system of devices spanning
    multiple locations across the world — all controlled by a single interface
    accessed via the Internet or local network.

    Read more
  • Ubiquiti UniFi AC Mesh PRO

    802.11AC Indoor/Outdoor Wi-Fi Access Point
    with Plug & Play Mesh Technology

    Breakthrough Wi-Fi Mesh Technology

    Expand the limits of wide-area Wi-Fi. UniFi® Mesh technology simplifies
    Wi‑Fi infrastructure deployments by enabling nearly unlimited application use
    including towns, stadiums, conference halls, and concert venues.

    Outdoor 3×3 MIMO AP

    The weather-resistant UniFi AC Mesh Pro AP is a dual-band 
    802.11AC 3×3 MIMO Wi-Fi Access Point with dual Gigabit Ethernet ports
     and integrated dual-band omni antennas. It is ideal for covering large
     outdoor spaces requiring omnidirectional coverage.

    Optimal Performance

    The UniFi AC Mesh Pro AP features dual-band performance with aggregate
    speeds of up to 1750 Mbps.

    UniFied IT Management

    UniFi creates a highly scalable, end-to-end system of devices spanning
    multiple locations across the world — all controlled by a single interface
    accessed via the Internet or local network.

    Read more
  • Ubiquiti UniFi AC PRO

    Ubiquiti UniFi AC PRO

    The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3×3 MIMO technology
    in a refined industrial design and is ideal for deployment of
    maximum‑performance wireless networks.

    Up to 5X Faster with Dual-Radio 3×3 11AC MIMO Technology

    The UniFi AC Pro AP supports simultaneous dual-band, 3×3 MIMO technology in
    the 5 and 2.4 GHz radio bands.

    Versatile Design

    The UniFi AC Pro AP is a gigabit, 802.3af-powered access point suitable for
    indoor or outdoor use.

    Designed for Optimal RF Performance

    The newly redesigned UniFi Controller optimizes RF performance:

    Scalable Enterprise Wi-Fi Management

    The UniFi Controller v4 software is a powerful, enterprise wireless
    software engine ideal for high-density client deployments requiring low
    latency and high uptime performance. With its software-based capabilities,
    the UniFi virtual control plane allows for unlimited scalability under one
    centralized controller. Remotely access the UniFi Controller to upgrade
    deployed UniFi APs while in the field.

    Read more
  • Ubiquiti UniFi AC PRO (5 Pack)

    Ubiquiti UniFi AC PRO (5 Pack)

    *Please note that 5packs do not include any PoE injectors. It is
    recommended to use an 802.3af/at PoE injector or switch, which can be
    purchased separately.

    The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3×3 MIMO technology
    in a refined industrial design and is ideal for deployment of
    maximum‑performance wireless networks.

    Up to 5X Faster with Dual-Radio 3×3 11AC MIMO Technology

    The UniFi AC Pro AP supports simultaneous dual-band, 3×3 MIMO technology in
    the 5 and 2.4 GHz radio bands.

    Versatile Design

    The UniFi AC Pro AP is a gigabit, 802.3af-powered access point suitable for
    indoor or outdoor use.

    Designed for Optimal RF Performance

    The newly redesigned UniFi Controller optimizes RF performance:

    Scalable Enterprise Wi-Fi Management

    The UniFi Controller v4 software is a powerful, enterprise wireless
    software engine ideal for high-density client deployments requiring low
    latency and high uptime performance. With its software-based capabilities,
    the UniFi virtual control plane allows for unlimited scalability under one
    centralized controller. Remotely access the UniFi Controller to upgrade
    deployed UniFi APs while in the field.

    Read more
  • Ubiquiti UniFi Access Card

    UniFi® Access Card is a highly secure NFC
    smart card compatible with the UniFi Access system.

    The card data is encrypted with both AES-128 and with UniFi Access
    proprietary security mechanism. These additional security measures protect
    the card number from leaks and duplication.

    Features:

    Secure NFC card for use with UniFi Access solution
    Each pack includes 20 UA-Cards

     

     

    Read more
  • Ubiquiti UniFi Access Starter Kit

    Ubiquiti UniFi Access Starter Kit
    Comprehensive starter kit with everything you need to set up a premium
    UniFi Access solution.

    UniFi Access Starter Kit contains everything you need to set up the next
    generation, state-of-the-art access control system for your business.
    Compatible with most Electric Bolts/Strikes and Magnetic Locks, the UniFi
    Access Starter Kit is easily installed with minimal effort and offers the
    convenience of the UniFi Access Controller, which allows you to easily manage
    users, visitors, schedules, and access policies. The UniFi Access Starter kit
    is powered by native PoE technology, PoE Switch is not included

    Starter Kit Contents:

    1x UniFi Access Hub
    1x UniFi Access Reader Pro
    1x UniFi Access Reader Lite
    1x UniFi Access Card (20 count)

    Works with UniFi Access Controller
    Remotely manage Access devices with one easy interface
    Set door policies, schedules, and permissions
    Create users, set roles and assign NFC cards
    Add visitors, define permitted areas and schedules
    Review statistics and detailed logs

    Note: UniFi Dream Machine Pro or Cloud Key Plus is required to run UniFi
    Access

    Read more
  • Ubiquiti UniFi Camera G4 Pro

    Super sharp 4K camera with 3x optical
    zoom and high-powered infrared LEDs for night vision. IP67 rated. Our most
    powerful camera yet.

    Capture every detail with the 4K resolution G4 Pro camera. The UniFi
    Protect G4 Pro is our most powerful camera yet, with a large 1/2″ image
    sensor, 3X powered optical zoom lens, and integrated high-power infrared LEDs
    for night vision. The adjustable base can be mounted to a flat surface or a
    pole with the included mounting hardware.

    Features:

    4K Video
    Powered 3X optical zoom lens
    Integrated 3X powered zoom lens ( Focal length 4.1mm ~ 12.3mm)
    H.264 triple-stream encoding
    FOV (H: 110˚~35 ˚ V:60 ˚ ~20˚)
    3840×2160, 1/2″, 8MP sensor
    IP67 support
    Wide angle IR LED for night vision

    Read more
  • Ubiquiti UniFi Cloud Key GEN2 Plus

    Powerful Remote Cloud Management
    Total Privacy, No Fees, Instant Setup

    High Performance Cloud Key Gen2

    Multiple Controllers in Cloud Key Gen2 Plus

    Control Your Cloud Key Gen2 With Mobile Applications

    *Please take note: Power supply / PoE injector not included.

    Read more
  • Ubiquiti UniFi Dream Machine

    UniFi Dream Machine

    All-in-one device with access point, 4-port switch, and security gateway.
    Everything you need for a small-scale wired and Wi-Fi network.

    UniFi Dream Machine (UDM) is the easiest way to introduce UniFi to homes
    and businesses. The UDM includes everything you need for a small-scale wired
    or Wi-Fi network. It’s easy to use and still offers all the benefits of UniFi
    for homes and businesses.

    Powered by a fast 1.7 GHz quad‑core processor, the UDM combines multiple
    functions into a single elegant device.

    Integrated 4×4 Enterprise AP

    The UDM delivers the requisite high‐performance Wi‐Fi and fits into
    high‐density environments as part of the overall enterprise network.

    Integrated Cloud Key

    The UniFi Network Controller can provision UniFi devices, map out networks,
    and quickly manage system traffic.

    Integrated Security Gateway

    The UDM offers advanced firewall policies and persistent threat management
    to act as an Intrusion Prevention System (IPS) and Intrusion Detection System
    (IDS).

    Integrated Gigabit Switch

    The UDM provides a managed 4-port Gigabit switch so you can easily add
    network storage or wired client devices.

    UniFi Network Controller with Intuitive User Interface

    Centralized management software featuring a graphical user interface offers
    easy setup and convenient control.

    Scalable UniFi Network Controller

    The UniFi® Software-Defined Networking (SDN) platform is an end-to-end
    system of network devices across different locations — all controlled from a single
    interface.

    Download Mobile App
     

    Try the Demo Controller

    Features:

    High‐Performance Dual Band 802.11ac 4×4 Wave 2 AP
    Managed 4-Port Gigabit Switch
    Advanced Security Gateway with IDS/IPS and DPI
    UniFi Network Controller with Intuitive User Interface
    Scalable Through Additional UniFi Devices Connected to LAN
    Powered by Fast 1.7 GHz Quad-Core Processor

    Read more
  • Ubiquiti UniFi Dream Machine Pro

    UniFi Dream Machine Pro
    The Best Experience for Large Networks

    All-in-one 1U rack enterprise security gateway & network appliance for
    small to medium-sized businesses. The optimal experience for larger networks.

    UniFi Dream Machine Pro (UDM-Pro) is an all-in-one enterprise network
    appliance. UDM-Pro integrates all current and upcoming UniFi controllers with
    a security gateway, 10G SFP+ WAN, 8-port Gbps switch and off-the-shelf
    3.5″ HDD support.

    The enterprise-class security gateway combines routing, 10 Gbps SFP+ WAN,
    application visibility, VPN services, and 3.5 Gbps full threat management
    throughput into a single device.

    Works with new UniFi OS

    Centralized application management. All current and upcoming controllers
    combined into one interface
    Shared user and access management with role assignments and group
    management
    Enhanced Cloud portal with simple remote access to UniFi OS

    Security Gateway

    The enterprise-class security gateway combines routing, 10 Gbps SFP+ WAN,
    application visibility, VPN services, and 3.5 Gbps full threat management
    throughput into a single device.

    Managed Switch

    Fully managed switch with 10 Gbps SFP+ downlink and eight RJ45 GbE ports
    for scaling up.

    UniFi Network

    Integrated network management system for all network elements with an
    easy-to-use and modern user interface. Wi-Fi AI automatically optimizes the
    Wi-Fi network.

    UniFi Protect

    Professional-grade video surveillance system and NVR with integrated
    3.5″/2.5″ HDD bay for scalable storage.

    Advanced Redundancy

    The UDM Pro features dual WAN ports with failover and U-LTE1 backup
    connectivity to ensure reliable access to the internet. UniFi SmartPower
    USP-RPS2 provides redundant power in the event of AC power loss. 
    1 Available in the US only.   2 Sold Separately.

    UniFi Enterprise Architecture Evolves with UniFi OS

    The new UniFi Cloud portal provides simple access to all controllers and an
    increasing number of UniFi applications.

    Seamless Network Integration

    Use the UniFi Dream Machine Pro as your network controller.

    Specifications

    DIMENSIONS

    Width x Height x Depth:

    442.4 x 43.7 x 285.6 mm

    (17.42 x 1.72 x 11.24″)

    Weight: 3.90 kg (8.60 lb)

    With Mounting Kits:

    3.99 kg (8.80 lb)

    PACKAGE CONTENTS

    (2) Rackmount Brackets

    (8) Bracket Screws

    (4) Mounting Screws

    (4) Cage Nuts

    (1) Security Screw

    (4) 2.5″ HDD Screws

    Power Cord

    (4) Rubber Feet

    TECHNICAL SPECIFICATIONS

    Interfaces

    (8) 10/100/1000 RJ45 LAN Ports

    (1) 10/100/1000 RJ45 WAN Port

    (1) 1/10G SFP+ LAN Port

    (1) 1/10G SFP+ WAN Port

    Management Interfaces

    Ethernet In-Band

    (1) Bluetooth BLE

    Technical Information

    IDS/IPS Throughput: 3.5 Gbps *

    Processor: Quad ARM Cortex-A57 Core at 1.7 GHz

    System Memory: 4 GB DDR4

    On-Board Flash Storage: 16 GB eMMC

    * Measured with iPerf3.

    Environment

    Operating Temperature: -10° to 40° C (14° to 104° F)

    Operating Humidity: 5 to 95% Noncondensing

    Power

    Max. Power Consumption: 33W

    Voltage Range: 100 to 240VAC

    Power Method: (1) Universal AC Input, 100-240VAC, 50/60 Hz

    Redundant Power: (1) RPS DC Input

    Power Supply: Internal 50W/12V

    ESD/EMP Protection: Air: ± 16 kV, Contact: ± 12 kV

    Certifications

    CE, FCC, IC

    Read more
  • Ubiquiti UniFi Dream Router

    All-in-one WiFi 6 router with a 3 Gbps
    aggregate throughput rate.

    The Dream Router (UDR) is a next-generation WiFi 6 router that delivers
    unbeatable performance at an unmatched price. Featuring advanced 4×4 MU-MIMO
    and OFDMA technology, the UDR has an aggregate wireless throughput rate of up
    to 3 Gbps over its 2.4 and 5 GHz bands, ensuring quality connectivity for all
    of your devices. The UDR also has (5) GbE RJ45 ports, including two that
    supply PoE to compatible devices, and all of its connections can be
    conveniently monitored from the router’s LCM color screen. Designed to be a
    comprehensive, easy-to-use network hub, the UDR can be set up and configured
    in minutes via the UniFi Network web application or mobile app.

    Features:

    Four-stream WiFi 6 technology

    5 GHz band (4×4 MU-MIMO/OFDMA) with a 2.4 Gbps throughput rate

    2.4 GHz band (4×4 MIMO) with a 600 Mbps throughput rate

    128 GB of internal storage

    (1) GbE RJ45 WAN port

    (4) LAN ports, including (2) PoE outputs

    0.96″ LCM color screen for network and connection monitoring

    Micro SD memory card expansion slot*

    Read more
  • Ubiquiti UniFi Dream Wall

    Wall-mountable UniFi Gateway Console with
    a built-in high-speed access point, network video recorder, and PoE
    switch.

    Integrated Enterprise WiFi6 (4×4 MIMO)
    Full UniFi OS and UniFi application support
    3.5+ Gbps routing
    (1) 10G SFP+, (17) GbE RJ45 LAN ports including (4) PoE++, (4) PoE+, and
    (4) PoE ports
    (1) 10G SFP+, (1) 2.5GbE RJ45 WAN ports
    4.7″ touchscreen for management
    Integrated 128 GB SSD & pre-installed 512 GB microSD card

    Read more
  • Ubiquiti UniFi G4 Dome Camera

    4MP, weather and vandal-proof dome camera
    with infrared LEDs for clear, around-the-clock surveillance.
    The G4 Dome is a durable, outdoor-ready dome camera that captures 4MP video
    at 24 frames per second (FPS) and provides consistently clear nighttime
    surveillance with its built-in infrared LEDs. The G4 Dome is also protected
    with an IPX4-rated, weatherproof enclosure with IK08-rated vandal resistance,
    making it a great choice for monitoring highly populated areas and venues.
    Designed for optimal versatility, the compact G4 Dome can be discreetly
    mounted to either a wall or ceiling, and depending on its orientation, you
    can easily pan or tilt its lens to ensure the right view.

    Features:

    4MP, 24 FPS video
    Integrated infrared LEDs for nighttime surveillance
    IPX4-rated weatherproof enclosure
    IK08-rated vandal resistance
    Built-in microphone
    Powered by 802.3af PoE 
    Managed with the UniFi Protect application and mobile app

    Read more
  • Ubiquiti UniFi nanoHD

    Ubiquiti UniFi nanoHD

    Deploy the UniFi nanoHD AP in high-density environments requiring maximum
    wireless performance and minimal footprint. The UniFi nanoHD AP features
    simultaneous, dual-band, 4×4 MU-MIMO technology and convenient 802.3af PoE
    compatibility.

    The Newest Price / Performance Leader in Enterprise Wi-Fi

    Powered by Software Defined Networking

    Easily deploy your UniFi Enterprise System using the included UniFi
    Controller software. Manage thousands of UniFi devices across multiple sites,
    and scale your network as needed without any ongoing licensing fees.

    UniFi Controller Software Features:

    Our Smallest Access Point

    Our Smallest UniFi Access Point Available On the Market. UAP nanoHD is 30%
    smaller than UAP AC Pro version.

    Model Comparison:

    Read more
  • Ubiquiti UniFi Protect ViewPort PoE

    UniFi Protect ViewPort PoE

    The UniFi Protect ViewPort allows you to view your UniFi Protect camera
    feeds on an HDMI display. It uses Power over Ethernet and connects to the
    local network hosting your cameras and connects via HDMI to a display. The
    UniFi Protect ViewPort offers 4K video output at 30 frames per second.
    Protect systems can be viewed in custom high-density camera matrix
    configurations.

    Features

    View Unifi Protect cameras on an HDMI display
    Display up to 16 IP cameras simultaneously
    Easy setup with UniFi Protect System
    Powered by Power over Ethernet up to 1 Gbps
    HDMI video output up to 4K @ 30 fps

    Read more
  • Ubiquiti UniFi Switch 16 PoE (USW-16-POE)

    Ubiquiti UniFi Switch 16 PoE
    (USW-16-POE)

    The USW-16-POE is a configurable Gigabit Layer 2 switch with sixteen
    Gigabit Ethernet ports including eight auto-sensing 802.3at PoE+ ports, and
    two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices
    and Gigabit fiber uplink options to your enterprise network. The USW-16-POE
    features a 1.3″ touch LCM to provide status information. With a depth of
    7.9″, the compact fanless design can be easily installed in a SOHO rack
    cabinet.

    Managed and configured by the UniFi Network Controller with UniFi mobile
    app support, the USW-16-POE offers an extensive suite of advanced Layer 2
    switching protocols and features, including operation mode (switching,
    mirroring, or aggregate) per port. The UniFi Network Controller and mobile
    app allow admins to configure and monitor virtually all of the switch
    features in a graphical user interface from anywhere.

    Read more
  • Ubiquiti UniFi Switch 24

    The USW-24 is a configurable Layer 2
    switch with 24 Gigabit Ethernet ports and 2 SFP ports. The SFP ports provide
    1 Gbps fiber uplink options to your enterprise network. The USW-24 features a
    1.3″ touchscreen, compact size, and fanless design. The touchscreen
    displays the current switch state and information for quick diagnosis.
    Managed and configured by the UniFi Network Controller with UniFi mobile app
    support, the USW-24 switch offers an extensive suite of advanced Layer 2
    switching protocols and features, including operating mode (switching,
    mirroring, or aggregate) per port.

    Features:

    (24) Gigabit Ethernet Ports
    (2) Gigabit SFP Ports
    1.3″ color touchscreen for status information
    Managed by UniFi Network Controller
    1U rackmountable (kit included)

    Managed by UniFi Network Controller version: 5.12.32 or higher

    Read more
  • Ubiquiti UniFi Switch 24 PoE (USW-24-POE)

    Ubiquiti UniFi Switch 24 PoE
    (USW-24-POE)

    24-Port managed PoE switch with (16) 802.3at PoE+ ports, (8) Gigabit
    Ethernet ports, and (2) SFP ports. Powerful second-generation UniFi
    switching.

    The USW-24-POE is a configurable Gigabit Layer 2 switch with twenty-four
    Gigabit Ethernet ports including sixteen auto-sensing 802.3at PoE+ ports, and
    two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices
    and Gigabit fiber uplink options to your enterprise network. The USW-24-POE
    features a 1.3″ touch LCM to provide status information. With a depth of
    7.9″, the compact fanless design can be easily installed in a SOHO rack
    cabinet.

    Managed and configured by the UniFi Network Controller with UniFi mobile
    app support, the USW-24-POE offers an extensive suite of advanced Layer 2
    switching protocols and features, including operation mode (switching,
    mirroring, or aggregate) per port. The UniFi Network Controller and mobile
    app allow admins to configure and monitor virtually all of the switch
    features in a graphical user interface from anywhere.

    Features:

    (24) Gigabit Ethernet Ports including (16) 802.3at PoE+
    (2) 1G SFP Ports
    1.3″ touch LCM
    Managed by UniFi Controller
    120W Power supply

    Read more
Chat with us

Cart

Your Cart is Empty

Back To Shop