Starlink Standard Pipe Adapter Alternative – Pole Mount for Starlink Gen 3 Dish
KSh 40,000.00
The Gen 3 Pole Mount is a convenient option for those wanting to mount their Gen 3 Starlink in a secure and convenient way at home, or on their boat or RV. Simply press the tabs on the Starlink kickstand and slide it out, and slide in the Pole Mount until it clicks in firmly, place it over a 2” Flag Pole Buddy pole (OR Harbor Freight: 1.65”, 1.5”, or 1” poles with correct insert), then simply tighten the M6 screws to cinch the mount on the pole and you’re all set!
Featuring stainless steel M6 screw and nylon lock nut hardware and manufactured from waterproof and UV thermoplastic that will not warp, the TRIO Gen 3 Pole Mount is built to last. It tilts the dish at an 8 degree angle to allow water run off and aerodynamic positioning. The pole mount also has a space for the Starlink cable to pass though.
If you already have a previous pole mount for Gen 1 or 2 Kits, use this pole mount (with or without insert) to fit on the same pole.
Package Dimensions:
Lenght: 5.7 in / , Width: 7.25 in / , Height: 4.1 in /
Package Weight:
/ 4 oz
+254 100 720022 / +254 720 548999
info@adishnetservices.com
www.adishnetservices.comRelated products
-
Add to cartDesigned for installation on shingled roofs, requires drilling. Not recommended for tile, slate, and clay roofing. For best results, the mount should be adjusted to ensure Starlink is installed as close to vertical as possible.Tools Needed: Drill, 1/2″ (12.7 mm) Socket Wrench, 5/32″ (4 mm) Drill BitMount Dimensions: Length: 8.66″ / 22 cm, Width: 4.3″ / 11 cm, Height: 6.14″ / 15.6 cm* INTERNATIONAL SHIPPING: ALL TAXES AND DUTIES ARE PAID BY THE BUYERPackage Dimensions:
Lenght: 5.5 in / 24.7 cm, Width: 9.7 in / 14 cm, Height: 3.1 in / 7.9 cm
Package Weight:
1 oz / 2.2 lb
-
Add to cartDesigned to attach to any pole with a max diameter of 2.5″ (64 mm). Slide adapter over the top of the existing pole, fasten provided screws, and drop Starlink in.* INTERNATIONAL SHIPPING: ALL TAXES AND DUTIES ARE PAID BY THE BUYERPackage Dimensions:
Lenght: 5.5 in / 14 cm, Width: 8.3 in / 21 cm, Height: 3.4 in / 8.7 cm
Package Weight:
0.6 kg / 1.35 lb
-
Starlink Flat High Performance Pipe Adapter
KSh 50,000.00Add to cartDesigned to attach to any pole with a max diameter of 2.4″ (62 mm). Slide adapter over the top of the existing pole, fasten provided screws, and drop Starlink in. Requires Wedge Mount Kit that comes with Flat High Performance Starlink.Compatibility: Flat High Performance Starlink KitPackage Dimensions:
Lenght: 6.5 in / 7.9 cm, Width: 10.4 in / 16.5 cm, Height: 3.1 in / 26.4 cm
Package Weight:
1.1 kg / 2.4 lb
-
STARLINK 150 FT REPLACEMENT CABLE KENYA | +254100720022
KSh 35,000.00Add to cart*Price includes shipping and handling fees
The 150’ cable is designed to replace the standard 50’ cable from the Starlink Kit when additional length is needed between your install location and the router.Tools Needed: N/APackage Dimensions: 12.2” x 3.5” x 12.8” / 31.1 x 8.9 x 32.3 cmPackage Weight: 6 lbs / 2.75 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
STARLINK LONG WALL MOUNT KENYA | +254100720022
KSh 20,000.00Add to cart*Price includes shipping and handling fees
Designed for installation on an exterior wall near the top of the gable; extra length provides clearance of overhang when needed. Drilling required.Tools Needed: Drill, Stud / Electrical Finder, Socket Wrench, Level, 5/32″ (4 mm) Drill Bit, 0.5″ x 2.5″ (12.5 x 63.5 mm) Socket, PencilMount Dimensions: Length: 16.8″ / 42.7 cm, Width: 4.84″ / 12.3 cm, Height: 4.44″ / 11.3 cmPackage Dimensions: 19.1″ x 5.5″ x 4.7″ / 48.5 x 14 x 11.9 cmPackage Weight: 3.3 lbs / 1.5 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
Reviews
There are no reviews yet.