Starlink Hail Protective Mount -Protect Your Starlink from Hail and Birds, Starlink Protective Cover for Starlink Dish Gen2/RV/Roof/Yacht/Outdoor. (Square Antenna)
Starlink Hail Protective Mount -Protect
Your Starlink from Hail and Birds, Starlink Protective Cover for Starlink
Dish Gen2/RV/Roof/Yacht/Outdoor. (Square Antenna)
High-quality materials: Starlink roof
protection cover panel is made of Kabulon endurance board (That is, PC
bulletproof glass), which is ideal for protecting against rain, hail, rocks,
and any other damage to the antenna.
Related products
-
STARLINK SHORT WALL MOUNT KENYA
KSh 20,000.00Add to cart*Price includes shipping and handling fees
Designed for installation on an exterior wall near the top of the gable. Drilling required. For overhang clearance, please reference the installation guide.Tools Needed: Drill, Stud / Electrical Finder, Socket Wrench, Level, 5/32″ (4 mm) Drill Bit, 0.5″ x 2.5″ (12.5 x 63.5 mm) Socket, PencilMount Dimensions: Length: 2.77″ / 7 cm, Width: 2″ / 5.1 cm, Height: 6.02″ / 15.3 cmPackage Dimensions: 8.3″ x 5.5″ x 3.4″ / 21 x 14 x 8.7 cmPackage Weight: 1.4 lbs / 0.6 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
Starlink 150 FT Replacement Cable for Gen2 / V2 Dish
KSh 50,000.00Add to cartThe 150’ cable is designed to replace the standard 75’ cable from the Starlink Kit when additional length is needed between your install location and the router.Package Dimensions:
Lenght: 3.5 in / 8.9 cm, Width: 12.2 in / 31.1 cm, Height: 12.8 in / 32.3 cm
Package Weight:
2.75 kg / 6 lb
-
STARLINK 75 FT REPLACEMENT CABLE KENYA
KSh 30,000.00Add to cart*Price includes shipping and handling fees
The 75’ cable is designed to replace the standard 75’ cable from the Starlink Kit in case of damage.Tools Needed: N/APackage Dimensions: 5.8″ x 2″ x 17.1″ / 14.9 x 5.1 x 43.6 cmPackage Weight: 3 lbs / 1.4 kgDM•Text•Call 24/7 Support
+254100720022 / +254720548999
-
10 Port Gigabit Unmanaged Ethernet Switch
KSh 16,000.00Add to cartInstead of only connecting a single network device – you can use this switch along with the Starlink Ethernet adapter to enable you to have multiple hardwire connections! In other words, hardwire your laptops, printers, and other network devices that support an ethernet connection. Not complicated setup required, just plug and play!
With this network switch you can:1) Connect up to 8 network devices – the other 2 ports (2 uplink ports) located in the far right on the displayed picture is where you will connect your ethernet cable that connects to your Starlink Ethernet Adapter).2) Ultra fast gigabit data transfer – Good for when you are downloading large files.3) May improve network connectivity.4) Quiet when powered on.Package Dimensions:
Lenght: / , Width: / , Height: /
Package Weight:
-
Add to cartDesigned for installation on shingled roofs, requires drilling. Not recommended for tile, slate, and clay roofing. For best results, the mount should be adjusted to ensure Starlink is installed as close to vertical as possible.Tools Needed: Drill, 1/2″ (12.7 mm) Socket Wrench, 5/32″ (4 mm) Drill BitMount Dimensions: Length: 8.66″ / 22 cm, Width: 4.3″ / 11 cm, Height: 6.14″ / 15.6 cm* INTERNATIONAL SHIPPING: ALL TAXES AND DUTIES ARE PAID BY THE BUYERPackage Dimensions:
Lenght: 5.5 in / 24.7 cm, Width: 9.7 in / 14 cm, Height: 3.1 in / 7.9 cm
Package Weight:
1 oz / 2.2 lb
Reviews
There are no reviews yet.