Category: Satellite Distribution
Satellite Distribution
Showing all 51 resultsSorted by popularity
-
Read more9725 SFU dCSS
Switch2 Satellite inputs, SKY Q compatible, 2 outputs with each 16 User
BandsUpgrade to Sky Q without changing your existing quadplex wall socket. The
9725 SFU dCSS Switch converts a wideband signal to dCSS so you can connect
any digital Set-Top box – such as Sky Q, Sky+, FreeSat or Freeview – without
changing your in-home wall socket.Designed for Pre-Wired dwellings with Wideband LNBs and Terrestrial and
Radio antennas
3 inputs: 2 Satellite cables (Wideband LNB) + 1 Terrestrial
cable
2 outputs with 16 user bands each
Multistandard: EN50494 – EN50607 – SKY – Legacy – Terr.
Supporting New Build Developers and also for Retro-Fitting
Makes all digital platforms available to residents
Upgrade to Sky Q without changing your existing quadplex wall
socket
For indoor use and outdoor useBack: Ref. 9720
Next: Ref. 9731 -
Read more9731 DSCR Multiswitch 1 output
4 satellite inputs, 4 satellite trunk outputs, 1 output with 16 User
Bandsup to 16 UBs per SCR Output
supports all SCR standards
ultra compact housing
trunk output for cascading multiple products
available for different operator user bands: MultiChoice &
SkyBack: Ref. 9725
Next: Ref. 9732 -
Read more9732 DSCR Multiswitch 2 outputs
4 satellite inputs, 4 satellite trunk outputs, 2 outputs with each 16 User
Bandsup to 16 UBs per SCR Output
supports all SCR standards
ultra compact housing
trunk output for cascading multiple products
available for different operator user bands: MultiChoice & SkyBack: Ref. 9731
Next: Ref. 9733 -
Read more9733 DSCR Multiswitch 1 output
4 satellite inputs, 4 satellite trunk outputs, passive terrestrial
diplexer, 1 output with 16 User Bandssatellite inputs for 1 universal LNB or 2 wideband LNBs (switchable)
1 dSCR output
up to 16 UBs per SCR output
improved satellite trunk loss: Typically 1 dB
auto detection for SCR and Legacy Mode
possibility to convert wideband inputs into Legacy outputs
support all SCR Standards
compatible with all Legacy STBs
passive terrestrial/cable diplexer
low power Sleep Mode
ultra compact housing
trunk output for cascading multiple products
available for different operator user bands: Sky & Cyfrowy
PolsatBack: Ref. 9732
Next: Ref. 9734 -
Read more9734 DSCR Multiswitch 2 outputs
4 satellite inputs, 4 satellite trunk outputs, passive terrestrial
diplexer, 2 outputs with each 16 User Bands4 satellite inputs for 1 universal LNB or 2 wideband LNBs
(switchable)
2 dSCR outputs
up to 16 UBs per SCR output
improved satellite trunk loss: Typically 1 dB
auto detection for SCR and Legacy Mode
possibility to convert wideband inputs into Legacy outputs
support all SCR Standards
compatible with all Legacy STBs
passive terrestrial/cable diplexer
low power Sleep Mode
ultra compact housing
trunk output for cascading multiple products
available for different operator user bands: MultiChoice & Sky &
Cyfrowy PolsatBack: Ref. 9733
Next: Ref. 9736SKY -
Read more9736SKY DCSS/DSCR Wideband Multiswitch 2
outputs2 wideband satellite inputs, 2 satellite trunk outputs, 2 outputs with each
16 User Bands2 wideband satellite inputs for 1 wideband LNB
2 dSCR outputs
up to 16 UBs per SCR output
auto detection for SCR and Legacy Mode
possibility to convert wideband inputs into Legacy outputs
support all SCR Standards
compatible with all Legacy STBs
low power Sleep Mode
ultra compact housing
trunk output for cascading multiple productsBack: Ref. 9734
Next: Ref. 9738 -
Read more9738 dSCR STACKER
2 SATELLITE INPUTS (INCL 1 TERRESTRIAL INPUT), 1 OUTPUT WITH 2 USER
BANDSThe dSCR Stacker is the perfect solution to upgrade an old single satellite
STB system to an dSCR-compatible dual input receiver (PVR) or 2 separate
dSCR-compatible set-top boxes. The advantage of using the 9738 is that no
additional cable is needed to connect the second tuner. The product stacks
both transponders on 1 cable.application: 1 Twin LNB, 2 ports of a multiswitch, 2 Twin LNBs connected to
Multiswitch (ref. 9920)
powers the LNB or multiswitch from the STB or from an additional power
supply
power with Ref. 2460 Power Supply
supports the following standards: EN50494/SCR standard (DiSEqC 1.0) &
EN50607/dCSS/dSCR standard (DiSEqC 2.0)Back: Ref. 9736SKY
Next: Ref. 9739 -
Read more9739 DSCR Multiswitch add-on
4 satellite + terrestrial inputs, 2 outputs with each 16 User Bands
The 9739 can be used with Quattro or Quad LNB types and will output in
Legacy or SCR mode. Use the Multiswitch Add-on to change a legacy Multiswitch
to a Channel Stacking Switch (CSS) without loss of existing legacy ports.
Concretely, you can use the Multiswitch Add-on to upgrade your legacy
Multiswitch system and make the latest generation of SCR set-top boxes (STB)
available in 1 or 2 Single Family Units (SFUs) per Add-on. You can also use
this Multiswitch Add-on to transform a Fiber GTU signal to a SCR GTU
signal.No need to interrupt the trunk signal during installation.
Power with Ref. 2460 Power SupplySupports the following standards:
EN50494/SCR standard (DiSEqC 1.0)
EN50607/dCSS/dSCR standard (DiSEqC 2.0)
CONCURRENT EN50494/EN50607 standards
SKY UK standardBack: Ref. 9738
Next: Ref. 9744 -
Read more9744 DSCR Multiswitch 4 outputs
4 satellite + 1 terrestrial inputs, 4 Satellite + 1 terrestrial trunk
outputs, 4 outputs with each 16 User Bandsavailable for different operator user bands: 9744MC (MultiChoice) &
9744SK (Sky)Back: Ref. 9739
Next: Ref. 9746 -
Read more9746 DSCR Multiswitch 8 outputs
4 satellite + 1 terrestrial inputs, 4 Satellite + 1 terrestrial trunk
outputs, 8 outputs with each 16 User Bandsavailable for different operator user bands: 9746MC (MultiChoice) &
9746SK (Sky)Back: Ref. 9744
Next: Ref. 9748 -
Read more9748 DSCR Multiswitch 16 outputs
4 satellite + 1 terrestrial inputs, 4 Satellite + 1 terrestrial trunk
outputs, 16 outputs with each 16 User Bandsavailable for different operator user bands: 9748MC (MultiChoice) &
9748SK (Sky)Back: Ref. 9746
Next: Ref. 9754 -
Read more9754 Digital SCR Multiswitch 4
outputs4 satellite + 1 terrestrial inputs, 4 SCR outputs
THE NEXT GENERATION DSCR MULTISWITCH FROM YOUR MARKET LEADER
This state-of-the-art Multiswitch in a compact die-cast housing is
optimized for installation in narrow spaces and will make your installation
more successful.Multi-standard: Wideband, dSCR, dCSS, Legacy, Terr.
Optimized performance and power consumption
Compact die-cast housing for easy installationBack: Ref. 9748
Next: Ref. 9754A -
Read more9754A Digital SCR Multiswitch 4
outputs4 satellite + 1 terrestrial inputs, 4 SCR outputs, Active Terrestrial
AmplifierTHE NEXT GENERATION DSCR MULTISWITCH FROM YOUR MARKET LEADER
This state-of-the-art Multiswitch in a compact die-cast housing is
optimized for installation in narrow spaces and will make your installation
more successful.Multi-standard: Wideband, dSCR, dCSS, Legacy, Terr.
Optimized performance and power consumption
Compact die-cast housing for easy installation
Active Terrestrial AmplifierBack: Ref. 9754
Next: Ref. 9758 -
Read more9758 Digital SCR Multiswitch 8
outputs4 satellite + 1 terrestrial inputs, 8 SCR outputs
THE NEXT GENERATION DSCR MULTISWITCH FROM YOUR MARKET LEADER
This state-of-the-art Multiswitch in a compact die-cast housing is
optimized for installation in narrow spaces and will make your installation
more successful.Multi-standard: Wideband, dSCR, dCSS, Legacy, Terr.
Optimized performance and power consumption
Compact die-cast housing for easy installationBack: Ref. 9754A
Next: Ref. 9758A -
Read more9758A Digital SCR Multiswitch 8
outputs4 satellite + 1 terrestrial inputs, 8 SCR outputs, Active Terrestrial
AmplifierTHE NEXT GENERATION DSCR MULTISWITCH FROM YOUR MARKET LEADER
This state-of-the-art Multiswitch in a compact die-cast housing is
optimized for installation in narrow spaces and will make your installation
more successful.Multi-standard: Wideband, dSCR, dCSS, Legacy, Terr.
Optimized performance and power consumption
Compact die-cast housing for easy installation
Active Terrestrial AmplifierBack: Ref. 9758
Next: Ref. 9774 -
Read more9774 Digital SCR Multiswitch 4
outputs8 satellite + 1 terrestrial inputs, 4 SCR outputs
The 9774 has 8 satellite wideband inputs and 1 terrestrial
input.This allows you to use 2 quattro LNBs or 4 wideband LNBs.
The 4 SCR outputs have 16 user bands each.
Compatible with the following standards: EN50494, EN50607,
BSKYB8 satellite wideband inputs
compatible with 4 wideband LNBs
compatible with 2 Quattro LNBs
4 SCR outputs with each 16 user bands
1 terrestrial input
STB should support dSCR (EN50494), dCSS (EN50607) or BSKYBBack: Ref. 9758A
Next: Ref. 9775 -
Read more9775 Digital SCR Multiswitch 6
outputs8 satellite + 1 terrestrial inputs, 6 SCR outputs
OFFER MORE VIDEO CONTENT WITH LESS EQUIPMENT
The 9775 has 8 satellite wideband inputs and 1 terrestrial
input.
This allows you to use 2 quattro LNBs or 4 wideband LNBs.
The 6 SCR outputs have 10 user bands each.What makes the 9775 unique is the following:
on each individual output, you can select the input and channel
plan.
This multiplies the available content and minimizes your equipment
costs.With the 9775, you can offer a wide range of video content in multi-dwelling
units.
For each single family unit, you can select a specific channel
plan.
When the family’s preferences change, or there’s a new family moving in,
you can simply change the output settings.
This gives you much more flexibility and you only need one
Multiswitch.8 satellite wideband inputs
compatible with 4 wideband LNBs
compatible with 2 Quattro LNBs6 SCR outputs with each 10 user bands
1 terrestrial input
channel plan can be selected on each output individually
STB should support dSCR (EN50494) or dCSS (EN50607)Back: Ref. 9774
Next: Ref. 9780 -
Read more9646 Wideband to Quattro Convertor
Wideband to Quattro Convertor
Converts a wideband LNB (V,H) into a quattro LNB (VL, HL, VH, HH). DC pass
through on VL to power the wideband LNB.Ideal for systems with a mix of new wideband Set-Top-Boxes and other
Set-Top-Boxes.Back: Ref. 9645KIT
Next: Ref. 9653 -
Read more9653 Satellite Wideband Line
AmplifierSatellite line amplifier: 40-2400 MHz / sloped gain: 5-20 dB
Sloped gain for compensating coaxial cable losses
40 – 2400 MHz
13 – 18 VDC / 60 mABack: Ref. 9646
Next: Ref. 9654 -
Read more9654 Satellite Wideband Trunk
Amplifier2 inputs / 2 outputs / 290-2400MHz /30dB adjustable attenuation and slope /
compatible with wide band LNB’sSeparate adjustment for gain and slope on every line.
DC input for powering trunk line amplifiers & LNB.
Back: Ref. 9653
Next: Ref. 9655 -
Read more9655 Wideband 2 way splitter
2 way splitter for wideband trunklines (H/V) + TER
2-way splitter for wideband trunklines (H/V).
Low insertion loss DC power pass.
Back: Ref. 9654
Next: Ref. 9656 -
Read more9656 Wideband Tap
Tap for wideband trunklines (H/V) + TER
2-way tap for wideband trunklines (H/V).
Low insertion loss DC power pass.
Back: Ref. 9655
Next: Ref. 9657 -
Read more9657 AGC & ASC Wideband
amplifierAGC & ASC Wideband amplifier
The AGC & ASC Wideband Amplifier optimizes your Wideband V/H signal in
real-time. To do so, it uses Automatic Gain Control (AGC) and Automatic Slope
Control (ASC). Automatic Gain Control and Automatic Slope Control on both
satellite lines (V/H) DC input for powering amplifier and LNB Selectable
between Wideband LNB (290 – 2400 MHz) and Universal LNB (950 – 2150 MHz)
Output level selectable for up to 16 splits or 64 splits (for Fiber Optic
Systems).Back: Ref. 9656
Next: Ref. 9658 -
Read more9658 AGC & ASC Satellite & Cable
AmplifierAGC & ASC Satellite & Cable Amplifier
An ideal launch amplifier for Multiswitch systems with a Cable/Terrestrial
path.The AGC & ASC Satellite & Cable Amplifier optimizes your Wideband
V/H (290-2400 MHz) and Cable (87-862MHz) signal in real-time.
To do so, it uses Automatic Gain Control (AGC) and Automatic Slope Control
(ASC).
Automatic Gain Control on all lines (V/H/Cable) and Automatic Slope Control
on both satellite lines (V/H)
DC input for powering amplifier and LNB (Optional power supply (ref.
2460))
Selectable between Wideband LNB (290 – 2400 MHz) and Universal LNB (950 –
2150 MHz)Back: Ref. 9657
Next: Ref. 9659 -
Read more9720 Wideband LNB
Wideband LNB with vertical and horizontal output (290-2340 MHz)
Receives any standard Ku satellite signal and generates a Horizontal and
Vertical IF signal. Each output contains both the low and the high band of
the polarization. LNB, able to receive 1 Ku satellite orbital slot 1
Horizontal and 1 Vertical output low noise output frequency range 290-2340
MHzBack: Ref. 9672L2
Next: Ref. 9725 -
Read more9659 Double AGC & ASC Satellite &
Cable AmplifierDouble AGC & ASC Satellite & Cable Amplifier
An ideal launch amplifier for Multiswitch systems with a Cable/Terrestrial
path.The AGC & ASC Satellite & Cable Amplifier optimizes your Wideband
V/H (290-2400 MHz) and Cable (87-862MHz) signal in real-time.
Suitable for 2 wideband LNBs, or 1 Quattro LNB.
To do so, it uses Automatic Gain Control (AGC) and Automatic Slope Control
(ASC).
Automatic Gain Control on all lines (V/H/Cable) and Automatic Slope Control
on both satellite lines (V/H)
DC input for powering amplifier and LNB (Optional power supply (ref.
9933))
Selectable between Wideband LNB (290 – 2400 MHz) and Universal LNB (950 –
2150 MHz)Back: Ref. 9658
Next: Ref. 9669 -
Read more9935 Amplifier 4x SAT + 1x Cable
5 lines Amplifier 4x SAT + 1x Cable
F-con DC PoweredSeparate adjustment for gain on every line
Fixed pre-slope for satellite and cable
DC input (F-con) for powering trunk line amplifiers & LNBBack: Ref. 9933
Next: Ref. 9937 -
Read more9645KIT Stacker-Destacker
Two input Band stacking Multi Band Converter
The Stacker-Destacker is the perfect solution to upgrade an old
single-cable system with a twin LNB (or quad + DiSEqC switch ref 9920).To be used in combination with a dual input receiver (PVR) or 2 separate
single input receivers.No power adapter needed.
Power the device with the satellite receiver.
Wall / mast mounting with strap.Back: Ref. 9631
Next: Ref. 9646 -
Read more9780 Compact SAT IF to IF Headend
Compact SAT IF to IF Headend: 4 inputs
The 9780 is the new generation convertor for satellite signals to be used
in MDU’s. The compact plug-and-play module has a straightforward and easy
configuration. Perfect for equalizing and optimizing satellite transponders
as input for your optical headend.Multi-functional satellite IF-IF Headend: convertor, stacker, equaliser,
optimizer
Up to 32 DVB-S/S2 transponders
4 satellite inputs (Quattro/Quad/Wideband LNB)
Realtime AGC on all individual transponders
Read-out of input level strength: no need for field strength
meter
110 dBμV (output level)
Auto-tuning functionality
Can be used in Fiber Optic Systems with up to 128 passive splitsHERE’S WHAT THE FIRST USERS OF THE COMPACT SAT IF TO IF HEADEND SAY: it
truly is an innovative product with 5 big advantages:The most cost-efficient satellite IF-IF solution on the market
Very easy and fast installation, without the need for a field strength
meter
Extremely sharp filters
Perfect for equalizing and optimizing satellite transponders as input for a
fiber headend
Excellent quality of the output signal, the 9780 optimises the incoming
satellite signal to assure supreme video quality on the end-users’
TV-screens.Back: Ref. 9775
Next: Ref. 9780ETH -
Read more9780ETH Compact SAT IF to IF Headend
EthernetCompact SAT IF to IF Headend: 4 inputs with Cloud Access
The 9780ETH is the new generation convertor for satellite signals to be
used in MDU’s. The compact plug-and-play module has a straightforward and
easy configuration. Perfect for equalizing and optimizing satellite
transponders as input for your optical headend.uCloud is UnitronGroup’s centralized remote management tool. Use uCloud to
access and monitor your Johansson multimedia installations.
Configure product and activate (paying) license: www.ucloudserver.comMulti-functional satellite IF-IF Headend: convertor, stacker, equaliser,
optimizer.
Ethernet port for remote access
Up to 32 DVB-S/S2 transponders
4 satellite inputs (Quattro/Quad/Wideband LNB)
Realtime AGC on all individual transponders
Read-out of input level strength: no need for field strength
meter
110 dBμV (output level)
Auto-tuning functionality
Can be used in Fiber Optic Systems with up to 128 passive splits
Configure product and activate (paying) license: www.ucloudserver.comHERE’S WHAT INSTALLERS OF THE COMPACT SATELLITE CONVERTOR SAY: it truly is
an innovative product with 5 big advantages:The most cost-efficient satellite convertor solution on the market
Very easy and fast installation, without the need for a field strength
meter
Extremely sharp filters
Perfect for equalizing and optimizing satellite transponders as input for a
fiber headend
Excellent quality of the output signal, the 9780ETH optimises the incoming
satellite signal to assure supreme video quality on the end-users’
TV-screens.Back: Ref. 9780
Next: Ref. 9920 -
Read more2452 Power supply
24V power supply 1A for Stacker Destacker (ref 9645)
Power adapter for 9645KIT
24VDC 1ABack: Ref. 2438
Next: Ref. 2460 -
Read more2460 Power adapter 20V 3A
F-connectorPower adapter (180cm) 60W (20V / 3 A) with F-connector
This power supply is designed to power the trunk lines on the DC input
connector.Back: Ref. 2452
Next: Ref. 2460UK -
Read more2460UK Power adapter 20V 3A F-connector
UKPower adapter (180cm) 60W (20V / 3 A) with F-connector
This power supply is designed to power the trunk lines on the DC input
connector.Back: Ref. 2460
Next: Ref. 2461 -
Read more2461 DSCR Power Inserter
DSCR Power Inserter 18VDC, 500 mA
Powers SCR products without overloading the set-top boxes
Copies the set-top box voltage tone and DiSEqC to the SCR product (EN50494
and EN50607)Back: Ref. 2460UK
Next: Ref. 2462 -
Read more2462 Power adapter 20V 1,2A
F-connectorPower adapter 24W (20V / 1,2 A) with F-connector
This power supply is designed to power the trunk lines on the DC input
connector.Back: Ref. 2461
Next: Ref. 2462UK -
Read more2462UK Power adapter 20V 1,2A F-connector
UKPower adapter 24W (20V / 1,2 A) with F-connector
This power supply is designed to power the trunk lines on the DC input
connector.Back: Ref. 2462
Next: Ref. 4002 -
Read more9669 dSCR Power inserter
dSCR Power Inserter for trunk powering
This product enables you to add DC-power on to a coaxial cable
Back: Ref. 9659
Next: Ref. 9670 -
Read more9933 15 V power supply
power supply 15 V / 2,0 A for multiswitch
Back: Ref. 9930
Next: Ref. 9935 -
Read more4603 3-Way Smart Splitter
3-way smart splitter for SCR application
Standard splitters can give collisions when two commands come at the same
time or when one of the set-top boxes uses a permanent high voltage. A smart
splitter captures the commands of the different set-top boxes and serializes
them to guarantee no collisions happen.Indoor housing
3-way
No power adapter needed
Buffers and sends out the different command signalsBack: Ref. 4563
Next: Ref. 5050W -
Read more9670 dSCR DiSEqC inserter
The dSCR DiSEqC inserter combines DiSEqC commands from the STB with the
power from an external power adapter.9670KIT: ref.9670 with Power adapter (ref. 2462)
Back: Ref. 9669
Next: Ref. 9672L2 -
Read more9930 Power Inserter
4 lines power injecter, switchable 13/18V and 22kHz
The 9930 is a satellite power inserter, which can be used to ensure a
universal LNB is locked on the correct satellite band. Each of the 4 inputs
can be configured to deliver the desired control signals (13/18V + 0/22 kHz).
The selected control signal is indicated by a bi-color LED.4 satellite inputs / 4 satellite outputs
Frequency range: 5-2150 MHz
Current/input: up to 350 mA
Low insertion loss: <1 dB
Independent satellite band for each input (indicated by bi-color LED)
DC powering via F-conBack: Ref. 9920
Next: Ref. 9933 -
Read more9937 2 way splitter / 4x SAT + 1x
TERR.5 lines, 2 way splitter / 4x SAT + 1x TERR.
2-way satellite splitter
Terrestrial input / output
DC power pass
5dB lossBack: Ref. 9935
Next: Ref. 9939 -
Read more9939 1 way tap -10 dB / 4x SAT + 1x
TERR.5 lines 1 way tap -10 dB / 4x SAT + 1x TERR.
2-way satellite tap
Terrestrial input / output
DC power pass
Loss: 10dB (tap loss) / 1dB ( through loss)Back: Ref. 9937
Next: Ref. 9942 -
Read more9942 5 inputs multiswitch (4 SAT. + 1
TERR.)multiswitch 5 x 4 cascadable / -10 dB
SAT: 950-2300 MHz
Passive terrestrial signal 5-862 MHz with return path / DTT
compatible
The power supply is connected to whichever multiswitch and is used to feed
the LNBs and the amplifiers ref. 9934/9935
The LED on each multiswitch indicates the DC power pass
Multiswitches with different range of attenuation for equalized
distribution of signalsBack: Ref. 9939
Next: Ref. 9943 -
Read more9943 5 inputs multiswitch (4 SAT. + 1
TERR.)multiswitch 5 x 4 end unit / -5 dB
SAT: 950-2300 MHz
Passive terrestrial signal 5-862 MHz with return path / DTT
compatible
The power supply is connected to whichever multiswitch and is used to feed
the LNBs and the amplifiers ref. 9934/9935
The LED on each multiswitch indicates the DC power pass
Multiswitches with different range of attenuation for equalized
distribution of signalsBack: Ref. 9942
Next: Ref. 9946 -
Read more9946 5 inputs multiswitch (4 SAT. + 1
TERR.)multiswitch 5 x 6 cascadable / -10 dB
SAT: 950-2300 MHz
Passive terrestrial signal 5-862 MHz with return path / DTT
compatible
The power supply is connected to whichever multiswitch and is used to feed
the LNBs and the amplifiers ref. 9934/9935
The LED on each multiswitch indicates the DC power pass
Multiswitches with different range of attenuation for equalized
distribution of signalsBack: Ref. 9943
Next: Ref. 9947 -
Read more9950 5 inputs multiswitch (4 SAT. + 1
TERR.)multiswitch 5 x 8 cascadable / -10 dB
SAT: 950-2300 MHz
Passive terrestrial signal 5-862 MHz with return path / DTT
compatible
The power supply is connected to whichever multiswitch and is used to feed
the LNBs and the amplifiers ref. 9934/9935
The LED on each multiswitch indicates the DC power pass
Multiswitches with different range of attenuation for equalized
distribution of signalsBack: Ref. 9947
Next: Ref. 9954 -
Read more9954 5 inputs multiswitch (4 SAT. + 1
TERR.)multiswitch 5 x 12 cascadable / -10 dB
SAT: 950-2300 MHz
Passive terrestrial signal 5-862 MHz with return path / DTT
compatible
The power supply is connected to whichever multiswitch and is used to feed
the LNBs and the amplifiers ref. 9934/9935
The LED on each multiswitch indicates the DC power pass
Multiswitches with different range of attenuation for equalized
distribution of signalsBack: Ref. 9950
Next: Ref. 9958 -
Read more9958 5 inputs multiswitch (4 SAT. + 1
TERR.)multiswitch 5 x 16 cascadable / -10 dB
SAT: 950-2300 MHz
Passive terrestrial signal 5-862 MHz with return path / DTT
compatible
The power supply is connected to whichever multiswitch and is used to feed
the LNBs and the amplifiers ref. 9934/9935
The LED on each multiswitch indicates the DC power pass
Multiswitches with different range of attenuation for equalized
distribution of signalsBack: Ref. 9954
Next: Ref. 9980 -
Read more9980 9 inputs multiswitch (8 SAT. + 1
TERR.)multiswitch 9 x 8 cascadable / -10 dB
DiSEqC 2.0
SAT: 950-2300 MHz
Passive terrestrial signal 5-862 MHz with return path / DTT compatible
The power supply is connected to whichever multiswitch and is used to feed
the LNBs and the amplifiers ref. 9934/9935
The LED on each multiswitch indicates the DC power pass
Multiswitches with different range of attenuation for equalized
distribution of signals
Selection DiSEqC A or B or disconnection of SAT signal on each receiver
outputBack: Ref. 9958
Next: Ref. 9981 -
Read more9981 9 inputs multiswitch (8 SAT. + 1
TERR.)multiswitch 9 x 8 end unit / -5 dB
DiSEqC 2.0
SAT: 950-2300 MHz
Passive terrestrial signal 5-862 MHz with return path / DTT compatible
The power supply is connected to whichever multiswitch and is used to feed
the LNBs and the amplifiers ref. 9934/9935
The LED on each multiswitch
indicates the DC power pass Multiswitches with different range of
attenuation for equalized distribution of signals
Selection DiSEqC A or B or disconnection of SAT signal on each receiver
outputBack: Ref. 9980
Next: Ref. DIPLEXR1-09
