Category: Ubiquiti Shop Kenya
Ubiquiti Shop Kenya
Showing 1–60 of 112 resultsSorted by popularity
-
Read moreUbiquiti 16dBi 5GHz 120degree Dual
Polarity Sector AntennaairMAX® 2×2 BaseStation Sector Antenna
Pair the airMAX® Sector Antenna with a Rocket™M BaseStation for sector
coverage in Point-to-MultiPoint (PtMP) networks.Reduced Interference, Higher Gain
Highly resistant to noise interference, the airMAX® Sector Antennas provide
superior gain and beam performance for high-capacity, multi-point
networks.Industrial-Strength Construction
airMAX® Antennas are designed with robust mechanical design for outdoor
application use.Plug and Play Integration
Every airMAX® Antenna has a built-in Rocket™ mount, so no tools are needed
to install the Rocket BaseStation. -
Read moreUbiquiti 17dBi 90degree 5GHz Dual
Polarity Sector AntennaairMAX® 2×2 BaseStation Sector Antenna
Pair the airMAX® Sector Antenna with a Rocket™M BaseStation for sector
coverage in Point-to-MultiPoint (PtMP) networks.Reduced Interference, Higher Gain
Highly resistant to noise interference, the airMAX® Sector Antennas provide
superior gain and beam performance for high-capacity, multipoint networks.Industrial-Strength Construction
airMAX® Antennas are designed with robust mechanical design for outdoor
application use.Plug and Play Integration
Every airMAX® Antenna has a built-in Rocket™ mount, so no tools are needed
to install the Rocket BaseStation. -
Read moreUbiquiti 19dBi 5GHz 120degree Dual
Polarity Sector AntennaairMAX® 2×2 BaseStation Sector Antenna
Pair the airMAX® Sector Antenna with a Rocket™M BaseStation for sector
coverage in Point-to-MultiPoint (PtMP) networks.Reduced Interference, Higher Gain
Highly resistant to noise interference, the airMAX® Sector Antennas provide
superior gain and beam performance for high-capacity, multipoint
networks.Industrial-Strength Construction
airMAX® Antennas are designed with robust mechanical design for outdoor
application use.Plug and Play Integration
Every airMAX® Antenna has a built-in Rocket™ mount, so no tools are needed
to install the Rocket BaseStation. -
Read moreUbiquiti 1Gbps RJ45 Copper SFP
ModuleUbiquiti Networks offers a variety of U® Fiber modules to suit your fiber
connectivity applications.To connect copper Ethernet cables to SFP ports, use the UF-RJ45-10G in an
SFP+ port for speeds of up to 10 Gbps and distances of up to 30 m, or use the
UF-RJ45-1G in an SFP port for speeds of up to 1 Gbps and distances of up to
100m.Supported Media Copper
Connector Type RJ45
BiDi N/A
TX Wavelength N/A
RX Wavelength N/A
Data Rate 10/100/1000 Mbps
Cable Distance 100 m -
Read moreUbiquiti 20dBi 5GHz 90degree Dual
Polarity Sector AntennaairMAX® 2×2 BaseStation Sector Antenna
Pair the airMAX® Sector Antenna with a Rocket™M BaseStation for sector
coverage in Point-to-MultiPoint (PtMP) networks.Reduced Interference, Higher Gain
Highly resistant to noise interference, the airMAX® Sector Antennas provide
superior gain and beam performance for high-capacity, multi-point
networks.Industrial-Strength Construction
airMAX® Antennas are designed with robust mechanical design for outdoor
application use.Plug and Play Integration
Every airMAX® Antenna has a built-in Rocket™ mount, so no tools are needed
to install the Rocket BaseStation. -
Read moreSuperior Noise Immunity
Featuring reduced sidelobes and backlobes, the airMAX® ac Sector Antennas
are engineered to reject noise interference in co‑location deployments.Breakthrough Design and Performance
The airMAX® ac Sector Antennas feature carrier-class construction with an
innovative deflector design and 2×2, dual-polarity performance for airMAX
networks. -
Read moreUbiquiti airMAX ac 2×2 BaseStation Sector
AntennaThe airMAX® ac Sector Antennas feature carrier-class construction with an
innovative deflector design and 2×2, dual-polarity performance for airMAX
networks.Superior Noise Immunity
Featuring reduced sidelobes and backlobes, the airMAX® ac Sector Antennas
are engineered to reject noise interference in co‑location deployments.Market-Leading Beam Performance
Compare the diagram of the airMAX® ac Sector Antenna, model AM-5AC22-45, to
the diagram of a standard sector antenna, and note the superior noise
immunity and beam performance of the AM-5AC22-45.Industrial-Strength Construction
airMAX® ac Antennas are designed with robust mechanical design for outdoor
application use.Plug and Play Integration
Every airMAX® ac Antenna has a built-in Rocket™ mount, so no tools are
needed to install the Rocket BaseStation. -
Read moreUbiquiti 23dBi airFiber Slant 45
AntennaThe airFiber® X Antennas feature significant advances in noise isolation
and beam performance to complement the airFiber X radios for carrier
backhauls and Point-to-Point (PtP) bridging.Carrier-Class Construction
Incorporating a dish reflector design for excellent beam directivity, the
airFiber X antennas feature robust mechanical design using
industrial-strength hardware for outdoor application use.Compact Footprint for Deployment Flexibility
The compact form factor allows the Ubiquiti Networks® airFiber X Antennas
to be used in various applications, from carrier backhauls between towers to
PtP bridging between buildings.Plug and Play Integration
The Ubiquiti Networks® airFiber X Antennas are designed to integrate
seamlessly with the Ubiquiti Networks® airFiber X radios (sold
separately).Advanced RF Isolation Design
The innovative industrial design improves RF isolation to significantly
reduce interference and deliver superior gain for high-capacity, multipoint
networks.The near-field plot of the AF-5G23-S45 is displayed in watts and uses a
linear scale. The strength of the electromagnetic field is color-coded:Red: Highest strength
Green: Medium strength
Indigo: Lowest strength -
Read moreUbiquiti 23dBi LiteBeam M5
The LiteBeam™ is the latest evolution of a lightweight and compact, outdoor
wireless broadband product from Ubiquiti Networks. Each of these models was
designed to be an affordable cost/performance solution for long-distance,
wireless broadband bridging. It operates in the worldwide, license‐free 5 GHz
frequency range with high-performance speeds.The LiteBeam combines proprietary hardware and software technologies to
deliver its breakthrough combination of throughput and range with
cost‐effective value. The InnerFeed technology integrates the entire radio
system into the antenna feed, and our revolutionary airMAX TDMA protocol
enhances network performance and scalability.High-Gain, Directional Antenna
The LiteBeamM provides 23 dBi of gain for long-distance connectivity and
uses a directional antenna pattern for improved noise immunity.Integrated airMAX Technology
Unlike standard Wi-Fi protocol, the exclusive Ubiquiti Networks® airMAX
Time Division Multiple Access (TDMA) protocol allows each client to send and
receive data using pre-designated time slots managed by an intelligent AP
controller. This “time slot” method eliminates hidden node collisions and
maximizes airtime efficiency. Compared to other systems in its class,
the LiteBeam products deliver superior performance in reduced latency,
throughput, and scalability.Compact in Size, Light in Weight
A lightweight form factor contained within ultra-compact packaging, the
LiteBeamM is ideal for shipping and logistics.Full Adjustment Flexibility
The LiteBeam features a unique ball joint mount that provides adjustment
flexibility along three axes for versatile mounting options. The mounting
system, coupled with the built-in bubble level, enables quick and easy
alignment.Quick, Snap-and-Lock Assembly
The all-new mechanical design makes assembling the LBE-M5-23 and LBE‐5AC-23
– literally – a snap. No tools are required. Simply snap the feed, antenna
panels, rear housing, and ball joint mount together for a secure, solid
assembly. -
Read moreUbiquiti 30dBi 5GHz Lightweight
RocketDishThe Ubiquiti RocketDish is a Carrier Class Dish Antenna that was designed
to seamlessly integrate with Rocket M radios. The RocketDish
antenna delivers 2×2 MIMO dual-polarity performance.Innovative Industrial Design
Weighing in at only 7.4 kg, the RocketDish LW is engineered with ruggedized
yet lightweight components to withstand harsh outdoor conditions.Plug and Play Integration
The RocketDish LW has a built-in Rocket™ mount, so no tools are needed to
install the Rocket BaseStation.The RD-5G30-LW features the same gain as the RD-5G30 and adds the following
advantages:Lightweight yet robust components lessen the load.
The extended depth of the dish reflector rejects noise interference in
co‐location deployments.The design of the mounting bracket allows for ease of installation on a
pole or tower. -
Read moreUbiquiti 30dBi 5GHz RocketDish
AntennaThe Ubiquiti RocketDish is a Carrier Class Dish Antenna that was designed
to seamlessly integrate with Rocket M radios. The M-series Rocket combines
the “brains” in one robust unit; pair an M-sreies Rocket with RocketDish to
create powerful 2×2 MIMO PtP bridging solutions. This seamless integration
gives network architects unparalleled flexibility and convenience.Industrial-Strength Construction
airMAX® Antennas are designed with robust mechanical design for outdoor
application use.Plug and Play Integration
Every airMAX® Antenna has a built-in Rocket™ mount, so no tools are needed
to install the Rocket BaseStation. -
Read moreUbiquiti 48V 30W Gigabit PoE Adapter
(U-POE-at)48V 0.65A
This model is able to provide 48V Passive PoE or 802.3af/at output (to
compatible devices) up to 30 Watts.Delivers up to 30W of PoE+
Compatible with the U6 LR, U6 Pro, and other PoE+ devices
Surge, peak pulse, and overcurrent protection
Clover to Type N power cable with ground
LED indicator for status monitoringElectrostatic discharge (ESD) is the leading cause for outdoor device
failures. You can effectively protect against ESD damage using a grounded
Ubiquiti PoE Adapter, STP/FTP cable and shielded connectors.Please note that no power cord is included with this PoE injector.
A clover to SA 3pin power cord is available for purchase separately should
you this be required:
https://shop.dbg.co.za/powcnd5.htmlSpecifications:
Model U-POE-at
Dimensions 93 x 62 x 35 mm (3.66 x 2.44 x 1.38″)
Weight 156 g (5.5 oz)
Output voltage 48V DC @ 0.65A
LAN activity indicator No
Gigabit LAN port Yes
Remote reset capability Yes
Reset button No
Rated voltage 100—240V AC @ 50/60Hz
Input current 0.75A @ 90V AC
Inrush current <100A peak at 26℃
Efficiency 87%
Output ripple 1% max.
Switching frequency 70 kHz max.
Line regulation ≤ 3%
Load regulation ≤ 5%
2-pair powering Pins 4, 5 (+) and 7, 8 (-)
4-pair powering No
AC connector IEC-320 C6
Data In / PoE RJ45 shielded socket
Surge protection Difference and common mode
Clamping protection 11V data, 60V power
Max. surge discharge 1500A (8/20 μs) power
Peak pulse current 36A (10/1000 μs) data
Shunt capacitance <5 pF data
Response time <1 ns
Operating temperature 0 to 40° C (32 to 104° F)
Storage temperature -30 to 70°C (-22 to 158° F)
Operating humidity 35 to 90% noncondensing
Certifications CE, FCC, IC, UL -
Read moreUbiquiti 48V Gigabit PoE Adapter
(U-POE-AF)48V 0.32A
This model is able to provide 48V Passive PoE or 802.3af output (to
compatible devices).Ubiquiti PoE Adapters also provide a variety of features to help protect
your PoE devices:Surge protection
Clamping protection
Maximum surge discharge
Peak pulse current
AC cable with earth groundElectrostatic discharge (ESD) is the leading cause for outdoor device
failures. You can effectively protect against ESD damage using a grounded
Ubiquiti PoE Adapter, STP/FTP cable and shielded connectors.Please note that no power cable is included with this PoE injector. A
clover to SA 3pin power cord is available to purchase separately:
https://shop.dbg.co.za/powcnd5.htmlYou can also consider making use of the UltraLAN PoE injector as a cost
affective alternative:UltraLAN Gigabit PoE Adapter – 48V 0.3A (15W)
Specifications:
Output Voltage 48VDC @ 0.32A
LAN Activity Indicator No
Gigabit LAN Port Yes
Remote Reset Capability Yes
Reset Button No
Rated Voltage 100-240VAC @ 50/60Hz
Input Current 500mA @ 90VAC
Inrush Current <100A Peak @ 25°C
Efficiency 0.8425
Output Ripple 200mV p-p
Switching Frequency 65 kHz
Line Regulation ≤ 3%
Load Regulation ≤ 5%
2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-)
4-Pair Powering –
Operating Temperature 0 to 40° C
(32 to 104° F)
Storage Temperature -30 to 70°C
(-22 to 158° F)
Operating Humidity 5 to 90% Noncondensing
AC Connector IEC-320 C6
Data IN / POE RJ45 Shielded Socket
Surge Protection Difference and Common Mode
Clamping Protection 11V Data, 60V Power
Max. Surge Discharge 1500A (8/20 μs) Power
Peak Pulse Current 36A (10/1000 μs) Data
Shunt Capacitance <5 pF data
Response Time <1 ns -
Read moreUbiquiti 10dBi 5GHz AirMax Omni
AntennaairMAX® 2×2 BaseStation Sector Antenna
Pair the airMAX® Omni Antenna with a Rocket™M BaseStation for 360° coverage
in Point-to-MultiPoint (PtMP) networks. AirMAX® Omni Antennas are the first
of their kind to feature a patented, dual-polarity omni design.Industrial-Strength Construction
airMAX® Antennas are designed with robust mechanical design for outdoor application
use.Plug and Play Integration
Every airMAX® Antenna has a built-in Rocket™ mount, so no tools are needed
to install the Rocket BaseStation.Powerful Omnidirectional Coverage
airMAX® Omni Antennas provide 360° coverage, 2×2 MIMO performance in Line-of-Sight
(LOS) or Non-Line-of-Sight (NLOS) applications. -
Read moreUbiquiti 13dBi 5GHz AirMax Omni
AntennaairMAX® 2×2 BaseStation Sector Antenna
Pair the airMAX® Omni Antenna with a Rocket™M BaseStation for 360° coverage
in Point-to-MultiPoint (PtMP) networks. AirMAX® Omni Antennas are the first
of their kind to feature a patented, dual-polarity omni design.Industrial-Strength Construction
airMAX® Antennas are designed with robust mechanical design for outdoor application
use.Plug and Play Integration
Every airMAX® Antenna has a built-in Rocket™ mount, so no tools are needed
to install the Rocket BaseStation.Powerful Omnidirectional Coverage
airMAX® Omni Antennas provide 360° coverage, 2×2 MIMO performance in Line-of-Sight
(LOS) or Non-Line-of-Sight (NLOS) applications. -
Read moreUbiquiti 5GHz 90° Beamwidth Horn
AntennaWith a range of different beam widths, the isolation antennas are
interchangeable and feature high-performance beam patterns ideal for a range
of deployment needs. Used with the airFiber® LTU and airMAX® radios, these
antennas deliver superb co‐location performance without sacrificing
gain.*Please note that this product is only an antenna, and does not include any
radio/electronics. -
Read moreSlant 45 Antenna for airFiber®
The airFiber® X Antennas feature significant advances in noise isolation
and beam performance to complement the airFiber X radios for carrier
backhauls and Point-to-Point (PtP) bridging.Compact Footprint for Deployment Flexibility
The compact form factor allows the airFiber X Antennas to be used in
various applications, from carrier backhauls between towers to PtP bridging
between buildings.Plug and Play Integration
The airFiber X Antennas are designed to integrate seamlessly with the
airFiber X radios.Advanced RF Isolation Design
The innovative industrial design improves RF isolation to significantly
reduce interference and deliver superior gain for high‑capacity, multipoint
networks.airFiber X Conversion Kit
The 5 GHz RocketDish to airFiber® Antenna Conversion Kit, model
AF-5G-OMT-S45, convertsthe RocketDish RD-5G30 or RD-5G34 antenna for use with the airFiber AF-5X
radio. -
Read moreSlant 45 Antenna for airFiber®
The airFiber® X Antennas feature significant advances in noise isolation
and beam performance to complement the airFiber X radios for carrier
backhauls and Point-to-Point (PtP) bridging.Compact Footprint for Deployment Flexibility
The compact form factor allows the airFiber X Antennas to be used in
various applications, from carrier backhauls between towers to PtP bridging
between buildings.Plug and Play Integration
The airFiber X Antennas are designed to integrate seamlessly with the
airFiber X radios.Advanced RF Isolation Design
The innovative industrial design improves RF isolation to significantly
reduce interference and deliver superior gain for high‑capacity, multipoint
networks.airFiber X Conversion Kit
The 5 GHz RocketDish to airFiber® Antenna Conversion Kit, model
AF-5G-OMT-S45, convertsthe RocketDish RD-5G30 or RD-5G34 antenna for use with the airFiber AF-5X
radio. -
Read moreUbiquiti 5GHz AirMax AC LiteAP 16dBi
Sector (UB-LAP-120)The LiteAP is an ultra-lightweight airMAX ac Access Point with
incredible performance and disruptive pricing.airMAX ac Sector Coverage
The LiteAP features a 2×2 MIMO antenna and communicates with multiple
airMAX ac CPEs within a 120° coverage area.Now with airOS 8
airOS provides powerful features, including airMAX® ac protocol support,
real-time RF analytics, and an all-new design for enhanced usability.Lightweight and Sleek Design
The LiteAP features a lightweight antenna with an integrated radio in a
sleek and highly efficient design.Installation Flexibility
Featuring the freedom of three-axis alignment, the LiteAP fully assembles
in seconds – no tools needed. Only a single wrench is required for
pole-mounting. -
Read moreUbiquiti 5GHz AirMax AC LiteAP
17dBi 90degree Sector with GPS Sync (UB-LAP-GPS)The LiteAP is an ultra-lightweight airMAX ac Access Point with
incredible performance and disruptive pricing.airMAX ac Sector Coverage
The LiteAP features a 2×2 MIMO antenna and communicates with multiple
airMAX ac CPEs within a 120° coverage area.GPS Synchronization
LiteAPTM GPS supports GPS Sync for faster, more scalable, carrier-class
networks, with 90% higher throughout than competing solutions.Now with airOS 8
airOS provides powerful features, including airMAX® ac protocol support,
real-time RF analytics, and an all-new design for enhanced usability.Lightweight and Sleek Design
The LiteAP features a lightweight antenna with an integrated radio in a
sleek and highly efficient design.Installation Flexibility
Featuring the freedom of three-axis alignment, the LiteAP fully assembles
in seconds – no tools needed. Only a single wrench is required for
pole-mounting.Model Comparison:
-
Read moreUbiquiti 60G Precision Alignment
MountThe 60 GHz Precision Alignment Mount enhances mounting flexibility and
device alignment.It features an easy-to-use design that requires only an Allen wrench
(included) to align.Features:
Quick and easy installation
Supports airFiber (AF60) and airMAX® (GBE-LR) products
Flexible, easy alignment -
Read morePowerful, ceiling-mounted WiFi 6E access
point designed to provide seamless, multi-band coverage within high-density
client environments.
Features:WiFi 6 support (2.4/5/6 GHz bands)
10.2 Gbps aggregate throughput rate
(1) 2.5GbE RJ45 port (PoE In)
Powered with PoE+
Use with our USW Enterprise switches for maximum throughput -
Read moreAccess Point U6 Extender
Easy-to-deploy WiFi 6 coverage extender with a 5.3+ Gbps aggregate
throughput rate.The UniFi6 Extender (U6 Extender) is a portable, plug-and-play WiFi 6
access point that can easily and instantly broaden your home or office’s
wireless coverage. With its dual-band design and 5.3+ Gbps aggregate
throughput rate, the U6 Extender delivers the strong, reliable connectivity
needed to support even the most device-dense networks. Deploying this access
point is as simple as plugging it in, and its compact frame allows you to
strengthen your signal without cluttering your space or disrupting its
aesthetic. The U6 Extender can be adopted to your network in a matter of
minutes and centrally managed with either the UniFi Network web application
or mobile app.Features:
Dual-band WiFi 6 connectivity
5 GHz band (4×4 MU-MIMO and OFDMA) with up to a 4.8 Gbps throughput
rate
2.4 GHz band (2×2 MU-MIMO and OFDMA) with up to a 573.5 Mbps throughput
rate
Fits any standard EU wall outlet
Easily extends wireless coverage across large homes or offices
Important: These requirements must be met to wirelessly adopt the U6
Extender:
APs providing wireless connectivity for the U6 Extender must be updated to
Version 6.0.11 or later.
Dream Machines (UDM) must be updated to Version 1.12.22 or later.
Dream Routers (UDR) must be updated to Version 2.3.15 or later.Managed with the UniFi Network application: Version 6.5.55 and later
Adopt the U6-Extender in Minutes with Your UniFi Network Application
and:Centrally manage multiple networks from an intuitive interface
Enjoy real-time device insights and deep configuration options
Upgrade device firmware remotely
Manage network users and guests with ease
Personalize the design, architecture, and privacy of guest hotspots
Set up devices quickly and manage them on the go with a powerful mobile app -
Read moreIndoor/outdoor, 4×4 WiFi 6 access point
designed for mesh applications.The Access Point WiFi 6 Mesh (U6 Mesh) is a high-performance, four-stream
WiFi 6 access point that provides best-in-class signal meshing to enhance the
wireless coverage of home and enterprise networks. The U6 Mesh can reach an
aggregate throughput rate up to 5.3 Gbps with its 5 GHz (4×4 MU-MIMO and
OFDMA) and 2.4 GHz (2×2 MU-MIMO and OFDMA) bands. This access point also
operates at full 4×4 MIMO with 160 MHz channels to create high-capacity
wireless uplinks and facilitate faster data transfer. The sleek U6 Mesh is
discreet enough to stage anywhere in your home or office, but also rugged
enough to reliably operate outdoors thanks to its IPX5-rated, waterproof
housing. The U6 Mesh is a plug-and-play device designed to easily extend your
wireless signal to ensure full, seamless coverage and high-quality WiFi
connectivity. It can be set up in minutes and fully managed with the UniFi
Network web application or mobile app.Features:
High-efficiency 4×4 WiFi 6 (802.11ax)
5 GHz (4×4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate
2.4 GHz (2×2 MU-MIMO and OFDMA) band with a 573.5 throughput rate
Operates at full 4×4 MIMO with 160 MHz bandwidth
Powered with PoE (PoE adapter included)
Managed with the UniFi Network application: Version 6.3.51 and later -
Read moreairMAX AC Home Wi-Fi Access Point
With a compact design and integrated 24V PoE passthrough, the airCube™ is a
home Wi-Fi access point designed to interoperate with airMAX® CPEs.UNMS Support
Ubiquiti Network Management Software simplifies remote network
management.Super Antenna
Innovative Super Antenna provides wide-area coverage beyond regular Wi-Fi
access points.24V PoE Passthrough
The airCube can be powered by and provide power to an airMAX CPE using 24V
PoE.UMobile Support
Use the intuitive UMobile app for iOS and Android to install and configure
airCube.Sleek Design
The airCube’s attractive design means it can be positioned anywhere in the
room, improving Wi-Fi performance. -
Read moreairMAX Home Wi-Fi Access Point
With a compact design and integrated 24V PoE passthrough, the airCube™ is a
home Wi-Fi access point designed to interoperate with airMAX® CPEs.UNMS Support
Ubiquiti Network Management Software simplifies remote network
management.Super Antenna
Innovative Super Antenna provides wide-area coverage beyond regular Wi-Fi
access points.24V PoE Passthrough
The airCube can be powered by and provide power to an airMAX CPE using 24V
PoE.UMobile Support
Use the intuitive UMobile app for iOS and Android to install and configure
airCube.Sleek Design
The airCube’s attractive design means it can be positioned anywhere in the
room, improving Wi-Fi performance. -
Read moreThe New Standard for WISP Backhaul Performance
True 1Gbps+ Spectrally Efficient, Noise Resilient PTP Technology
Specifically Designed for WISP’sComplete Custom Hardware for the WISP, right down to the Silicon
Our core communications processing engine surpasses all of the limitations
inherent to generic Wi‐Fi chips.Game-Changing LTU Technology
Spectral Efficiency Comparison of 802.11n, 802.11ac, airFiber Original, and
LTU by year.Industry Leading Complete Software Suite
IP-67 Durability
airFiber 5XHD is Water Resistant and Perfect for any Weather
Conditions.Model Comparison:
AF-5XHD
AF-5X
IP-67 ✔ –
GPS External, Magnetic Base External, Magnetic Base
Max Throughput 1Gbps+ 500+ Mbps
Max PPS 2+ Million 1,000,000
Spectral Efficiency 21,2 bps/Hz 17,1 bps/Hz
Modulation Symbols 4096 QAM 1024 QAM
Spectral Widths Supported 10/20/30/40/50/60/80/100 MHz 10/20/30/40/50
MHz
UNMS App Bluetooth Support ✔ – -
Read moreMulti-gigabit, 60 GHz bridge with SFP+
support and a 2 km link range.The airFiber 60 HD (AF60 HD) is a 60 GHz radio designed to create superior
mid-range, point-to-point (PtP) links up to 2 km. The AF60 HD delivers
low-interference, low-latency throughput within the 60 GHz spectrum. Compact
and highly durable, the AF60 HD also features integrated GPS and a Bluetooth
management radio to simplify setup, configuration, and monitoring. This
bridge is ideal for ISPs looking to maximize signal linking with
cost-effective equipment.Features:
Low-interference 60 GHz spectrum
Up to a 2 km link range
Supports channel bonding to achieve up to a 6 Gbps throughput rate
(1) 10G SFP+ port
Terragraph-certified
Integrated GPS
Link planning support via ISP Design Center
Simple, Bluetooth-powered setup with the UISP™ Mobile app -
Read moreairFiber 60 GHz Radio System Featuring
Wave Technology with True Duplex Gigabit Performance for PtP Links over 12 km
DistancesAF60 LR is a 60GHz radio designed for high-throughput connectivity over an
extended range. The airFiber 60 LR features the integrated high-gain dish
antenna for high speed, long-range performance Point-to-Point (PtP) links.
New WaveTechnology enables incredible long-range performance within the 60GHz
spectrum.Includes a built-in Bluetooth management radio for easy setup.
Features:
Low-Interference 60 GHz Spectrum
Integrated GPS
Long Range, Up to 12 km
Precision Alignment Mount Included
Quick Setup Using the *UISP™ App via Bluetooth*UNMS Controller will change to UISP™ Controller from version 1.3.0 onward.
-
Read moreUbiquiti airFiber 60
Xtreme-Range
Features:
15+ km link range
5.4 Gbps max. throughput
5 GHz 800+ Mbps weather-resilient backup radio
(1) GbE and (1) 10G SFP+ port
Precision alignment mount
Integrated GPS & Bluetooth
Precision alignment kit (included)
Pole compatibility: Ø40 to 80 mm (Ø1.5 to 3.15″) on pipe outer
diameter
Note. This product should be purchased in pairs in order to form
links. -
Read moreUbiquiti airMAX GigaBeam Long-Range 60/5
GHz RadioairMAX AC 60 GHz/5 GHz Radio with 1+ Gbps Throughput and Up to 2 km
RangeFeaturing a high-gain dish antenna, the GigaBeam LR is a 60 GHz radio designed
for low-interference and high-throughput connectivity in long-range
deployments. It includes a 5 GHz radio for failover. For the 60 GHz link, the
GigaBeam LR supports full bandwidth use of 2.16 GHz. The dedicated management
radio allows easy setup via Wi-Fi.Features:
60 GHz radio with 5 GHz radio backup
Low-interference 60 GHz spectrum
Up to 1+ Gbps with low latency
Long-range performance
2.4 GHz management radio
Full bandwidth support: 2.16 GHz -
Read moreUbiquiti airMAX GigaBeam Plus 60 GHz
RadioairMAX AC 60 GHz Radio System with True Duplex Gigabit Performance.
GBE-Plus is a 60 GHz Radio capable of supporting 1 Gbps rates with very low
latency. GBE-Plus can be used as a high throughput backhaul/edge PTP solution
in WISP deployments. Housed in a outdoor industrial design, the GBE-Plus
achieves significant gain improvements with an integrated Cassegrain
reflector design. The GBE-Plus is easily set-up, configured and managed
through the UISP dashboard and UISP™️ Mobile app via Bluetooth.Low-Interference 60 GHz Spectrum
35 dBi Antenna Gain with Integrated Reflector
1.5+ Gbps Bidirectional Throughput with Low Latency
Long Range, up to 1.5 km
link.ui.com Planning Support
Quick Setup Using the UISP™️ App via Bluetooth -
Read moreUbiquiti airMAX IsoStation AC 5 GHz
BridgeFeaturing a die-cast aluminum base and interchangeable horn antenna, the
IsoStation ac with proprietary airMAX ac chipset and dedicated management
Wi-Fi isolates beam communications between your devices. Ideal as an airMAX
ac CPE in crowded RF environments such as urban areas.Features:
New Design
Improved Surge Protection
Management WiFi Radio/UISP Mobile
AirOS 8 -
Read moreUbiquiti airMAX NanoBeam AC, 2.4 GHz, 13
dBi StationUISP-ready, 2.4 GHz WiFi radio that can serve as a
point-to-multipoint station.High-performance NanoBeam design at 2 GHz with updated proprietary airMAX
ac chipset and dedicated management Wi-Fi for easy UISP mobile app support
and fast setup. Excellent solution for a simple PtP bridge or use as a PtMP
station (CPE).Features:
New antenna
Improved design
Management WiFi Radio/UISP mobile app -
Read moreairMAX PowerBeamM 2.4 GHz, 400 mm
BridgeHigh-Performance airMAX® Bridge Incorporating a dish reflector design with
advanced technology, the PowerBeam® is the latest generation of Ubiquiti
airMAX® CPE for customer locations. -
Read moreFull-band 2.4 GHz Point-to-Point (PtP)
and Point-to-MultiPoint (PtMP) basestation. Provides up to 330+ Mbps data
throughputThe Rocket 2AC features revolutionary airPrism RF filtering technology and
proprietary airMAX ac chipset. Deploy the Rocket 2AC for PtP or PtMP links
using the 2.4 GHz radio band.UISP mobile app for Android and iOS
-
Read moreUbiquiti AirPRISM 5GHz 3×30° HD Sector
AntennaThe innovative airPrism® Antenna features significant advances in noise
isolation and beam performance for co‑location deployments in a multipoint
network.3 x 30° Beamwidth Coverage
The three Rocket5ac Prism™ radios
are installed at the top, middle, and bottom
of the airPrism antenna. Each radio
independently transmits and receives within
its corresponding 30° beamwidth.Powerful Performance
Highly resistant to noise interference, the airPrism antenna provides
superior beam performance in high-density areas for high-capacity, multipoint
networks.Breakthrough Design
Mounted on a single airPrism antenna, three Rocket5ac Prism radios maximize
throughput in an efficient tower footprint, minimizing installation and tower
costs. -
Read moreAmpliFi Instant Wi-Fi System
The AmpliFi Instant Wi-Fi System includes a router with an easy-to-use
touchscreen display, 1 Gigabit Ethernet port, a WAN port, an Ethernet cable,
and one MeshPoint with an Ethernet port to maximize coverage and eliminate
dead zones in your home.The AmpliFi Instant Wi-Fi system provides superior coverage with a range of
up to 4,000 sq. ft and quick setup for whole home coverage with seamless Wi-Fi.Say hello to a fresh design aesthetic
And goodbye to trying to discreetly hide your router. You need your router
where you use your devices the most; like your office, family room or
bedroom. The AmpliFi Instant is designed to complement your home’s interior
both functionally and aesthetically. Now you can place your router on your
desk, side table or nightstand without messing up your home’s decor.Features you want from a system you can understand
The AmpliFi Instant has the features you want, like device status and guest
access, with a simple interface that doesn’t require advanced technical
degrees. It’s glowing LED light indicates the system status while the AmpliFi
App puts you in control of your WiFi. -
Read moreAmpliFi Instant Router
The AmpliFi Instant Router features an easy-to-use touchscreen display, one
Gigabit Ethernet port, a WAN port, and an Ethernet cable. The AmpliFi Router
provides excellent coverage for standard-sized homes of approximately 2,000
sq ft. Expand as needed by adding MeshPoints to your mesh Wi-Fi system.Say hello to a fresh design aesthetic
And goodbye to trying to discreetly hide your router. You need your router
where you use your devices the most; like your office, family room or
bedroom. The AmpliFi Instant is designed to complement your home’s interior
both functionally and aesthetically. Now you can place your router on your
desk, side table or nightstand without messing up your home’s decor.Features you want from a system you can understand
The AmpliFi Instant has the features you want, like device status and guest
access, with a simple interface that doesn’t require advanced technical degrees.
It’s glowing LED light indicates the system status while the AmpliFi App puts
you in control of your WiFi. -
Read moreUbiquiti EdgeSwitch 24 – Managed
PoE+ (250W) Gigabit Switch with SFPThe EdgeSwitch is a fully managed, PoE+ Gigabit switch, delivering robust
performance and intelligent switching for growing networks. The EdgeSwitch
offers an extensive suite of advanced Layer-2 switching features and
protocols, and also provides Layer-3 routing capability.Powerful Enterprise Switch Models
The EdgeSwitch™ delivers the forwarding capacity to simultaneously process
traffic on all ports at line rate without any packet loss. Total non-blocking
throughput: up to 26 Gbps for 24-port models.Enterprise-Class Features
The EdgeSwitch™ supports an extensive suite of advanced Layer-2 switching
features and protocols, and also provides Layer-3 routing capability.Optical Fiber Backhaul
Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks,
each 48-port model includes two SFP+ ports for uplinks of up to 10
Gbps.Convenient PoE+ Support
The EdgeSwitch™ features auto-sensing IEEE 802.3af/at and 24V passive PoE to
power multiple devices on the network.Advanced UI
The comprehensive UI is easy to learn and allows administrators to
configure and monitor features in a graphical user interface. For advanced
users, a Command-Line Interface (CLI) is available through telnet and
SSH. -
Read moreUbiquiti EdgeSwitch 48 (500W) – Managed
PoE+ Gigabit Switch with SFPThe EdgeSwitch® delivers the forwarding capacity to simultaneously process
traffic on all ports at line rate without any packet loss. Total non-blocking
throughput: up to 26 Gbps for 24-port models and up to 70 Gbps for 48-port
models.Enterprise-Class Features
The EdgeSwitch® supports an extensive suite of advanced Layer-2
switching features and protocols, and also provides Layer-3 routing
capability.Optical Fiber Backhaul
Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks,
each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps.Convenient PoE+ Support
The EdgeSwitch® features auto-sensing IEEE 802.3af/at and 24V passive PoE
to power multiple devices on the network.Advanced UI
The comprehensive UI is easy to learn and allows administrators to
configure and monitor features in a graphical user interface. For advanced
users, a Command-Line Interface (CLI) is available through telnet and SSH. -
Read moreUbiquiti EdgeSwitch 8 – Managed PoE+
Gigabit Switch with SFPThe fanless EdgeSwitch™ 8 is a fully managed, high-performance, PoE+
Gigabit switch. It delivers powerful performance and intelligent switching
with its 10 independent switching ports. A DC input option is included for
flexibility.Gigabit Connectivity
The compact EdgeSwitch features a versatile port configuration: eight
Gigabit Ethernet ports that support PoE+ and two SFP ports for fiber
connectivity. It can be placed on a desktop or mounted on a wall.Convenient PoE+ Support
Sharing a total of 150W, eight Gigabit Ethernet ports offer auto-sensing
IEEE 802.3af/at PoE/PoE+ or 24V passive PoE to simplify your
infrastructure.Optical Fiber Backhaul
The EdgeSwitch provides fiber connectivity options for your growing
networks. Two SFP ports provide uplinks of up to 1 Gbps.Powerful Performance
The EdgeSwitch delivers robust switching performance with its total,
non-blocking throughput of up to 10 Gbps.Switching Capacity
The EdgeSwitch offers the forwarding capacity to simultaneously process
traffic on all ports at line rate without any packet loss.Advanced UI
The comprehensive UI is easy to learn and allows administrators to
configure and monitor features in a graphical user interface. For advanced
users, a Command-Line Interface (CLI) is available through telnet and
SSH. -
Read moreUbiquiti Ethernet Surge Protector
G2
Ethernet to Ethernet Grounded ESD ProtectionThe new ETH-SP GEN2 features an even higher discharge protection (10kA+)
compared to the older model. It’s engineered to protect any
Power‑over‑Ethernet (PoE) or non‑PoE device with a connection speed of up to
1 Gbps.ESD Protection for Outdoor PoE Devices
Damaging electrostatic discharge attacks and surges are diverted to the
ETH‑SP‑G2 and safely discharged into the ground, so network devices are
protected.Additional ESD Protection
All Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so
the ETH‑SP‑G2 adds another layer of protection to your outdoor, high-speed
network.Plug and Play Installation
Connect the ground and Ethernet cables in between your network
devices. -
Read moreUbiquiti GigaBeam
airMAX AC 60 GHz/5 GHz Radio with 1+ Gbps ThroughputThe GigaBeam is a 60 GHz radio designed for low-interference and
high-throughput connectivity. It includes a 5 GHz radio for failover. For the
60 GHz link, the GigaBeam supports full bandwidth use of 2.16 GHz. The
dedicated management radio allows easy setup via Wi-Fi.Features:
60 GHz radio with 5 GHz radio backup
Low-interference 60 GHz spectrum
Up to 1+ Gbps with low latency
2.4 GHz management radio
Full bandwidth support: 2.16 GHzSpecifications:
Enclosure UV-Resistant Polycarbonate
Gain
5 GHz
60 GHz
10 dBi
17.2 dBi
Networking Interface 10/100/1000 Ethernet Port
Wi-Fi for Management
Max. Power Consumption 11W
Power Method Passive PoE (Pairs 4, 5+; 7, 😎
Power Supply 24V, 0.5A Gigabit PoE Adapter (Included)
Mounting Pole-Mount (Kit Included)
Wall-Mount (Not Included)
ESD/EMP Protection ± 24kV Contact/Air
Operating Temperature -40 to 60° C (-40 to 140° F)
Operating Humidity 5 to 95% Noncondensing
CertificationsCE, FCC, IC
Max. Conducted TX Power
5/60 GHz Combined
25 dBm
Channel Bandwidth
60 GHz
5 GHz
2160 MHz
20/40/80 MHz
Opearating Frequency
Worldwide 5.180 – 5.875
57 – 66 -
Read moreUbiquiti Gigabit 24V (0.3A) PoE
AdapterUbiquiti Networks™ offers Power over Ethernet (PoE) Adapters to power a
variety of Ubiquiti products. The PoE Adapters are compatible with most
Ubiquiti PoE devices. Ubiquiti’s PoE Adapters also provide a variety of
safety features, to help protect your Ubiquiti hardware, such as:Surge protection
Clamping protection
Maximum surge discharge
Peak pulse current
AC cable with earth ground
ESD attacks are the leading cause for device failures. You can effectively
protect against ESD attacks using a grounded Ubiquiti PoE Adapter, shielded
outdoor Ethernet cable, and shielded RJ-45 connectors.Please note that no power cable is included with this PoE injector. A
clover to SA 3pin power cord is available to purchase separately:
https://shop.dbg.co.za/powcnd5.htmlYou can also consider making use of the UltraLAN PoE injector as a cost
affective alternative:UltraLAN Gigabit PoE Adapter – 24V 0.6A (15W)
UltraLAN Gigabit PoE Adapter – 24V 1.5A (30W)
UltraLAN Gigabit PoE Adapter – 48V 0.3A (15W) -
Read moreUbiquiti Gigabit 24V (0.5A) PoE
AdapterUbiquiti Networks™ offers Power over Ethernet (PoE) Adapters to power a
variety of Ubiquiti products. The PoE Adapters are compatible with most
Ubiquiti PoE devices. Ubiquiti’s PoE Adapters also provide a variety of
safety features, to help protect your Ubiquiti hardware, such as:Surge protection
Clamping protection
Maximum surge discharge
Peak pulse current
AC cable with earth ground
ESD attacks are the leading cause for device failures. You can effectively
protect against ESD attacks using a grounded Ubiquiti PoE Adapter, shielded
outdoor Ethernet cable, and shielded RJ-45 connectors.Please note that no power cable is included with this PoE injector. A
clover to SA 3pin power cord is available to purchase separately:
https://shop.dbg.co.za/powcnd5.htmlYou can also consider making use of the UltraLAN PoE injectors as a cost
affective alternative:UltraLAN Gigabit PoE Adapter – 24V 0.6A (15W)
UltraLAN Gigabit PoE Adapter – 24V 1.5A (30W)
UltraLAN Gigabit PoE Adapter – 48V 0.3A (15W) -
Read moreUbiquiti Gigabit 24V (1A) PoE
AdapterUbiquiti Networks™ offers Power over Ethernet (PoE) Adapters to power a
variety of Ubiquiti products. The PoE Adapters are compatible with most
Ubiquiti PoE devices. Ubiquiti’s PoE Adapters also provide a variety of
safety features, to help protect your Ubiquiti hardware, such as:Surge protection
Clamping protection
Maximum surge discharge
Peak pulse current
AC cable with earth ground
ESD attacks are the leading cause for device failures. You can effectively
protect against ESD attacks using a grounded Ubiquiti PoE Adapter, shielded
outdoor Ethernet cable, and shielded RJ-45 connectors.Please note that no power cable is included with this PoE injector. A
clover to SA 3pin power cord is available to purchase separately:
https://shop.dbg.co.za/powcnd5.htmlYou can also consider making use of the UltraLAN PoE injector as a cost
affective alternative:UltraLAN Gigabit PoE Adapter – 24V 0.6A (15W)
UltraLAN Gigabit PoE Adapter – 24V 1.5A (30W)
UltraLAN Gigabit PoE Adapter – 48V 0.3A (15W) -
Read moreGPON C+ Optical Transceiver
The UFiber™ OLT’s GPON SFP ports are designed for use with the UF-GP-C+ SFP
module. -
Read moreModular Design
The isolation antennas are interchangeable and feature high-performance
beam patterns for a range of demanding deployment needs. Combined with the
PrismStation 5AC or airFiber LTU radio, the system gets maximum gain out of
the smallest footprint.*Please note that this product is only an antenna, and does not include any
radio/electronics. -
Read moreIn-Wall 802.11ac Wave 2 Wi-Fi Access Point
Integrated Gigabit Switch
Four ports are available for bridging – one of which offers PoE
passthrough
when the AP is powered by an 802.3at PoE+ switch.Superior Processing Power
The UniFi IW HD AP is capable of complex operations (guest control,
filtering, and other resource-intensive tasks) that may slow down a
lesser-equipped AP.Power over Ethernet (PoE) Standard
The UniFi IW HD AP can be conveniently powered by an 802.3af or 802.at
compliant switch. We recommend powering your UniFi devices with a UniFi PoE
Switch.UniFi Controller
Use the UniFi Controller to provision thousands of UniFi APs, map out
networks,
quickly manage system traffic, and provision additional UniFi APs. -
Read moreairMAX IsoBeam 620 mm Isolator
RadomeThe IsoBeam™ 620 is an isolator radome that is available as an optional
accessory for these dish antenna models:RocketDish® RD-5G30-LW
PowerBeam™ PBE-5AC-620
PowerBeam PBE-M5-620
AF-5G30-S45Seamless Integrated Design
Improved wind load performance and advanced RF energy isolation in a sleek
integrated design.Plug and Play Integration
Use the IsoBeam with any of these dish antennas: airFiber® AF‑5G30‑S45,
PowerBeam™ PBE‑5AC‑620, PowerBeam PBE‑M5‑620, and RocketDish™ RD‑5G30‑LW.
Installation is quick and easy – requiring just a single screw.Breakthrough Isolation Performance
The innovative RF-choke perimeter delivers superior noise immunity in
co-location deployments. -
Read moreUbiquiti LiteBeam 5AC 26dBi
Long-RangeThe LiteBeam® AC is an ultra-lightweight airMAX ac CPE device with
incredible range and disruptive pricing.Management Wi-Fi Radio
The LiteBeam® AC integrates a separate Wi-Fi radio for fast and easy setup
using your mobile device.Improved Mounting and Surge Protection
Featuring enhanced protection against ESD events, the LiteBeam® AC offers a
more robust mount with separate azimuth and elevation adjustments.Now with airOS®8 and airView®
airOS®8 provides powerful features, including airMAX ac protocol support,
real-time RF analytics, and an all-new design for enhanced usability.High-Gain, Directional, 2×2 MIMO Antenna
The LiteBeam ac provides 23 dBi of gain for long-distance connectivity and
uses a directional antenna pattern for improved noise immunity.Breakthrough Industrial Design
Featuring the freedom of three-axis alignment, the LiteBeam ac fully
assembles in seconds – no tools needed. Only a single wrench is required for
pole-mounting.Compact in Size, Light in Weight
A lightweight form factor contained within ultra-compact packaging, the
LiteBeam ac is ideal for shipping and logistics. -
Read moreUbiquiti LiteBeam AC GEN2
The LiteBeam® AC is an ultra-lightweight airMAX ac CPE device with
incredible range and disruptive pricing.Management Wi-Fi Radio
The LiteBeam® AC integrates a separate Wi-Fi radio for fast and easy setup
using your mobile device.Improved Mounting and Surge Protection
Featuring enhanced protection against ESD events, the LiteBeam® AC offers a
more robust mount with separate azimuth and elevation adjustments.Now with airOS®8 and airView®
airOS®8 provides powerful features, including airMAX ac protocol support,
real-time RF analytics, and an all-new design for enhanced usability.High-Gain, Directional, 2×2 MIMO Antenna
The LiteBeam ac provides 23 dBi of gain for long-distance connectivity and
uses a directional antenna pattern for improved noise immunity.Breakthrough Industrial Design
Featuring the freedom of three-axis alignment, the LiteBeam ac fully
assembles in seconds – no tools needed. Only a single wrench is required for
pole-mounting.Compact in Size, Light in Weight
A lightweight form factor contained within ultra-compact packaging, the
LiteBeam ac is ideal for shipping and logistics. -
Read more5 GHz PtMP LTU Client, functions in a
PtMP environment with the LTU-Rocket as the BaseStation.Incorporating Ubiquiti’s proprietary LTU technology, the LTU-Lite is a 5
GHz radio with an integrated antenna design for use as a PtMP CPE. LTU technology
breaks through the limitations of 802.11 Wi-Fi technology and supports 1024
QAM for superior performance. Channel width flexibility (10/20/30/40/50 MHz)
allows independent TX and RX channel frequency configurations anywhere within
the radio band to avoid local interference.Features
PtMP CPE
1024 QAM
10/20/30/40/50 MHz channel bandwidth
Central configuration management from AP side
Frequency split
Auto power adjustments
Router mode supportFunctions in a PtMP environment with the LTU-Rocket as the basestation
-
Read more5 GHz PtMP LTU Long-Range Client,
functions in a PtMP environment with the LTU-Rocket as the BaseStation.Incorporating innovative industrial design with advanced technology, the
LTU LR is a Point-to-MultiPoint (PtMP) 5 GHz Radio with an integrated antenna
designed for use as a PtMP CPE. LTU technology that breaks through the
limitations of 802.11 Wi-Fi technology and supports 1024QAM for high
performance and flexible bandwidth (10/20/30/40/50 MHz).Features:
PtMP CPE
1024 QAM
10/20/30/40/50 MHz channel bandwidth
Central configuration management from AP side
Frequency split
Auto power adjustments
Router mode support
Range up to 30kmFunctions in a PtMP environment with the LTU-Rocket as the basestation
-
Read more5 GHz PtMP LTU Client with advanced RF
performance, functions in a PtMP environment with the LTU-Rocket as the
BaseStation.Incorporating innovative industrial design with advanced technology, the
LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber
station. Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not
impeded by the limitations of standard 802.11 Wi-Fi technology. It features
an integrated high-gain dish for long range and high performance. Channel
width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel
frequency configurations anywhere within the radio band to avoid local
interference.Features:
PtMP CPE
1024 QAM
10/20/30/40/50 MHz channel bandwidth
Central configuration management from AP side
Frequency split
Automatic power adjustments
Router mode supportFunctions in a PtMP environment with the LTU-Rocket as the basestation
-
Read moreUbiquiti LTU Rocket
Ubiquiti introduces the LTU Rocket®, the first Point-to-Multi-Point (PtMP)
BaseStation radio in the LTU™ product family. Operating in the 5 GHz
frequency band, the LTU Rocket is a spectrally efficient, noise-resilient
PtMP AP specifically designed for wireless ISPs (WISPs).Primary features of the LTU Rocket include:
600+ Mbps PtMP performance1
Up to 64 client connections per AP2
2+ Million pps
Proprietary RF filtering1 1+ Gbps with future firmware upgrade.
2 255 client connections with future firmware upgrade
Superior Performance
LTU is a new, proprietary technology with custom silicon and radio design
that break through the limitations of 802.11 Wi-Fi technology. This enables
LTU to deliver far superior performance over previous airMAX products that
are based on 802.11 Wi-Fi.The LTU Rocket is designed for WISPs from the
ground floor up. Its core communications processing engine enables low
latency, long-range capability, DFS flexibility, higher constellations,
better power output, and improved receive sensitivity.Seamless Compatibility
The LTU Rocket is designed to be paired with a variety of Ubiquiti antennas
to suit the needs of each installation. The radio includes a mounting bracket
that allows it to be used with a 5 GHz airMAX® Sector antenna or airMAX Omni
antenna for a complete 5 GHz PtMP BaseStation. You can even pair three LTU
Rocket radios with the airPrism® 5 GHz 3×30° HD Sector Antenna for
co-location deployments. The LTU Rocket also works with any CPE device in the
LTU family, such as the LTU-Pro.Deployment Example:
Channel Width Flexibility
Channel width flexibility allows independent TX and RX channel frequency
configurations anywhere within the radio band to avoid local interference.
Channel width options include:10 MHz
20 MHz
30 MHz
40 MHz
50 MHz
Up to 100 MHz** Available with future firmware upgrade
Auto Power Adjustments
By default, the Auto Output Power* option allows the LTU Rocket to set the
output power (EIRP) to the appropriate level.Frequency Split
The LTU Rocket can use different frequencies for TX and RX to avoid
interference.Signal Control
The LTU Rocket’s target TX output power controls each station’s TX output
power. A PtMP network can manage signal levels to enhance network stability
and achieve optimal wireless performance with the highest possible
modulation.Convenient Configuration
To manage the LTU Rocket, you have two options: the LTU Configuration
Interface and Ubiquiti Network Management System (UNMS™). Either option lets
you manually configure the LTU Rocket. The LTU Rocket can also be used to
automatically configure the stations. On each station, use the Find My AP
feature to scan for APs using the same channel bandwidth, select the
appropriate LTU Rocket, and then use it to configure the station.Integrated GPS
Built-in GPS improves synchronization and allows map and Fresnel views on
the Dashboard.LTU Configuration Interface
PtMP Dashboard
The Dashboard offers map and Fresnel views* so you can visualize the
network. The map view shows your PtMP links overlaid on a geographic map,
while the Fresnel view shows the link calculated for your selected CPE,
including line of sight, first Fresnel zone, and 60% clearance zone.
* Available for models equipped with GPS.New graphs provide instant status updates and help you to detect
connectivity issues and their effects on PtMP performance:
The airtime distribution bar graph displays in real time how much airtime
each CPE is using. Click any point to view the airtime and link score for a
specific CPE.The AP RF environment bar graph shows ambient RF noise levels across the
frequency spectrum.
The combined remote RF environment bar graph also shows ambient RF noise
levels but for the combined environment of all of the remote CPEs.The local and remote RX rate histograms show the receive modulation rates
of the various CPEs.Real-Time Spectral Analysis
airView® spectral analysis runs on a dedicated and independent receiver,
which has excellent EVM (Error Vector Magnitude) performance.
The receiver can also perform other tasks, such as a search for channel
occupancy, DFS detection, and automatic channel/frequency assignment.
Calibration (signal level measurement accuracy) and resolution bandwidth
options are enhanced. Spectral zoom (user-defined scan limits) is also
available. -
Read moreUbiquiti Multi Mode (LC) SFP Module
PairThe UF-MM1G is ideal for short-distance, outdoor, bi-directional,
multi-mode fiber runs for distances of up to 550m at 1 Gbps.Outdoor Fiber Installations
For short-distance runs of 300+ meters, use UFiber 1G multi-mode modules
for maximum reuse of existing infrastructure.UF-MM-1G-S
Supported Media Multi-Mode Fiber
Connector Type (1) LC
BiDi ✓
TX Wavelength
850 nmRX Wavelength
850 nmData Rate 1.25 Gbps SFP
Cable Distance 550 m
Pack Options 1-PairPlease note: This kit is only sold as a pair (one box with 2 units inside)
-
Read moreUbiquiti NanoBeam AC GEN2
High-Performance airMAX® Bridge
Incorporating innovative industrial design with proprietary airMAX® ac
technology, the NanoBeam® ac is ideal for CPE deployments requiring maximum
performance from the smallest possible footprint.Management Wi-Fi Radio
The NanoBeam® AC integrates a separate Wi-Fi radio for fast and easy setup
using your mobile device.Improved Surge Protection
The NanoBeam® AC features enhanced protection against ESD events.
Superior Processing
Ubiquiti’s airMAX® engine with custom IC dramatically improves TDMA latency
and network scalability. The custom silicon provides hardware acceleration
capabilities to the airMAX scheduler, to support the high data rates and dense
modulation used in airMAX AC technology.Incredible Antenna “Beam” Performance
The form factor of the NanoBeam™ AC features the highest gain for its size.
The NanoBeam AC’s excellent beam directivity provides the best performance in
high-noise environments.Now with airOS 8
airOS 8 provides powerful features, including airMAX® ac protocol support,
real-time RF analytics, and an all-new design for enhanced usability.AirMAX Technology
Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access
(TDMA) airMAX protocol allows each client to send and receive data using
pre-designated time slots scheduled by an intelligent AP controller. This
“time slot” method eliminates hidden node collisions and maximizes airtime
efficiency. It provides significant performance improvements in latency,
throughput, and scalability compared to all other outdoor systems in its
class. -
Read moreUbiquiti NanoBeam M5 16dBi
Starting with the first-generation NanoBridge®, Ubiquiti Networks™
pioneered the all-in-one design for an airMAX® product functioning as a CPE
(Customer Premises Equipment). Now Ubiquiti Networks launches the latest
generation of CPE, the NanoBeam™.Incredible Antenna “Beam” Performance
The form factor of the NanoBeam® features the highest gain for its size.
The NanoBeam’s excellent beam directivity provides the best performance in
high-noise environments.AirMAX Technology
Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access
(TDMA) airMAX protocol allows each client to send and receive data using
pre-designated time slots scheduled by an intelligent AP controller. This
“time slot” method eliminates hidden node collisions and maximizes airtime
efficiency. It provides significant performance improvements in latency,
throughput, and scalability compared to all other outdoor systems in its
class.
