Category: Amplifiers
Amplifiers
Showing all 16 resultsSorted by popularity
-
-
Read moreIF
Inline 20dB Amplifier 950-2400Mhz (SA-20)• Frequency range (MHz): 950-2400
• Gain: 20dB
• Satellite inline amplifier intended for use where a long cable run is
required.Product code: SA-20
-
Read moreREMOTE
POWERED SPLITBAND AMPLIFIER 20 dB Remote Powered Post Amplifier for
terrestrial and SAT-IF -
-
-
-
-
-
-
Read moreSpaun
Post Amplifier for Cacadable DistributionThe Spaun NVF5522SR is a post amplifier for a cascadable satellite
distribution network. Amplifier with pre-compensating slope. Synchronous
level adjuster for all SAT IF amplifiers.Product code: NVF5522SR
-
Read moreSpaun
SAT-IF Inline Amplifier 16 to 24db (SVG24LE)The Spaun SVG 24 LE SAT-IF Inline amplifier power supply is directly via a
connected satellite receiver. Ideal for compensating the attenuation of long
cable runs between LNB and amplifier because of pre-compensating slope. All
DC through paths are both 22 kHz tone and DiSEqC capable.Product code: SVG24LE
-
Read moreSpaun
SAT-IF Inline Amplifier Remote Powered (SVG10F)The Spaun SVG 10 F Sat Inline amplifier with 10dB gain is suitable for
satellite and unicable satellite systems. The Inline Amplifier is ideally
mounted directly on the LNB output or on the inputs and outputs of a
multiswitch (if present). All DC through paths are both 22 kHz tone and
DiSEqC capable.Product code: SVG10F
-
-
Read moreTriax
TMS55-AMP – Satellite IF Amplifier 20dB GainThe TMS55-APM is a 5 Line Amp, with 5 inputs and 20dB gain, compensates for
the cable loss in your designed multiswitch systems.
• Powered directly via the DC input port, or line powered via all Sat
lines.
• European IRS Certification Scheme: TMS 5 Input Cascade Multiswitches and
Amplifiers are certified to the EICS scheme, demonstrating the high quality
of the solution and compatibility with all major satellite and TV
platforms.Product code: TMS55-AMP
-
Read moreTriax
TMS55-AMP + PSU – Satellite IF Amplifier 20dB Gain with PSUThe TMS55-APM is a 5 Line Amp, with 5 inputs and 20dB gain, compensates for
the cable loss in your designed multiswitch systems.
• Powered directly via the DC input port, or line powered via all Sat
lines.
• European IRS Certification Scheme: TMS 5 Input Cascade Multiswitches and
Amplifiers are certified to the EICS scheme, demonstrating the high quality
of the solution and compatibility with all major satellite and TV platforms.
(TMS55-PSU Included)Product code: TMS55-AMP + PSU
-
Read moreTriax
TMS55-PSU – Power Supply for Triax Multiswitch, Tap, Splitter or Amp• PSU 100-240V AC 50/60Hz to 18V DC 2A.
• Power Supply Units deliver 18V DC to your cascade system.
• Power can be inserted into any TRIAX cascade Multiswitch, Tap, Splitter
or Amplifier.
• Suitable for small to large systems.Product code: TMS55-PSU
